ABSTRACT
Cadmium selenide (CdSe) semiconductor nanorods are prepared in hydrothermal process using hydrazine hydrate (N2H4.H2O) and ammonia (NH3.H2O) as reducing agents. The reaction time is increased to 7 h and the amount of hydrazine hydrate used is also increased to 15 mL which have resulted in diminished stacking faults in the CdSe nanorods prepared. The crystal structure, morphological variations, and size of the prepared CdSe nanorods are examined by XRD analysis. The crystalline size of the CdSe nanorods is 20-30 nm in diameter. HRTEM images reveal the formation of high order CdSe nanorods of the length about 25-40 nm. The bandgap in the CdSe nanoparticles is determined to be 2.17 eV. The peak at 595 nm in photoluminescence (PL) spectrum indicates oxygen vacancy defects in the prepared CdSe sample. The variation of dielectric properties with respect to temperature and frequency of pelletized CdSe is studied. High photocatalytic efficiency (98%) of catalyst/H2O2 is also achieved for decomposition of Rhodamine-B dye.
Subject(s)
Cadmium Compounds , Nanotubes , Selenium Compounds , Hydrogen Peroxide , LightABSTRACT
Silver oxide, ruthenium oxide nanomaterials and its composites are widely used in a variety of applications. Plasma-mediated synthesis is one of the emerging technologies to prepare nanomaterials with desired physicochemical properties. In this study, dielectric barrier discharge (DBD) plasma was used to synthesize Ag2O and Ag2O/RuO2 nanocomposite materials. The prepared materials showed good crystallinity. The surface morphology of the Ag2O exhibited "garland-like" features, and it changed to "flower-like" and "leaf-like" at different NaOH concentrations. The Ag2O/RuO2 composite showed mixed structures of aggregated Ag2O and sheet-like RuO2. Mechanisms governing the material's growth under atmospheric pressure plasma were proposed. Chemical analysis was performed using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Thermogravimetric analysis (TGA) showed the thermal decomposition behavior and the oxygen release pattern.
ABSTRACT
This work investigated the decomposition of ethylene in a continuous flow dielectric-packed bed plasma reactor filled with various packing materials at atmospheric pressure and room temperature. When compared to the case without any packing material, the reactor filled with packing materials remarkably facilitated the plasma-induced decomposition of ethylene in the order of α-alumina>silica>zirconia>glass wool (GW). Under identical condition, the increase in the decomposition efficiency (DE) with increasing the specific energy input was more rapid in the plasma reactor filled with the packing materials than in the blank plasma reactor. In the early stage, almost complete decomposition of ethylene was observed with the α-alumina, but after a certain period of time, the DE decreased with time. Unlike the α-alumina, the other packing materials examined did not show any significant deterioration in the decomposition over time during 10-h operation. After the regeneration of the used packing materials by using the plasma in the presence of oxygen, the original decomposition performance was nearly recovered. The decrease in the BET surface area due to the formation of polymer deposits was observed in the used α-alumina and silica; however the surface area was almost regained by the regeneration. While no other byproducts except carbon oxides and N2O were detected with the α-alumina and silica, methane, acetylene, formaldehyde and N2O were identified in the effluent gas with the zirconia and GW packing materials.
