Advances in electrochemical biosensor design for the detection of the stress biomarker cortisol.

The monitoring of stress levels in humans has become increasingly relevant, given the recent incline of stress-related mental health disorders, lifestyle impacts, and chronic physiological diseases. Long-term exposure to stress can induce anxiety and depression, heart disease, and risky behaviors, such as drug and alcohol abuse. Biomarker molecules can be quantified in biological fluids to study human stress. Cortisol, specifically, is a hormone biomarker produced in the adrenal glands with biofluid concentrations that directly correlate to stress levels in humans. The rapid, real-time detection of cortisol is necessary for stress management and predicting the onset of psychological and physical ailments. Current methods, including mass spectrometry and immunoassays, are effective for sensitive cortisol quantification. However, these techniques provide only single measurements which pose challenges in the continuous monitoring of stress levels. Additionally, these analytical methods often require trained personnel to operate expensive instrumentation. Alternatively, low-cost electrochemical biosensors enable the real-time detection and continuous monitoring of cortisol levels while also providing adequate analytical figures of merit (e.g., sensitivity, selectivity, sensor response times, detection limits, and reproducibility) in a simple design platform. This review discusses the recent developments in electrochemical biosensor design for the detection of cortisol in human biofluids. Special emphasis is given to biosensor recognition elements, including antibodies, molecularly imprinted polymers (MIPs), and aptamers, as critical components of electrochemical biosensors for cortisol detection. Furthermore, the advantages and limiting factors of various electrochemical techniques and sensing in complex biofluid matrices are overviewed. Remarks on the current challenges and future perspectives regarding electrochemical biosensors for stress monitoring are provided, including matrix effects (pH dependence and biological interferences), wearability, and large-scale production.

Vibrio parahaemolyticus and Vibrio vulnificus in vitro biofilm dispersal from microplastics influenced by simulated human environment.

Growing concerns exist regarding human ingestion of contaminated seafood that contains Vibrio biofilms on microplastics (MPs). One of the mechanisms enhancing biofilm related infections in humans is due to biofilm dispersion, a process that triggers release of bacteria from biofilms into the surrounding environment, such as the gastrointestinal tract of human hosts. Dispersal of cells from biofilms can occur in response to environmental conditions such as sudden changes in temperature, pH and nutrient conditions, as the bacteria leave the biofilm to find a more stable environment to colonize. This study evaluated how brief exposures to nutrient starvation, elevated temperature, different pH levels and simulated human media affect Vibrio parahaemolyticus and Vibrio vulnificus biofilm dispersal and processes on and from low-density polyethylene (LDPE), polypropylene (PP), and polystyrene (PS) MPs. Both species were able to adequately disperse from all types of plastics under most exposure conditions. V. parahaemolyticus was able to tolerate and survive the low pH that resembles the gastric environment compared to V. vulnificus. pH had a significantly (p ≤ 0.05) positive effect on overall V. parahaemolyticus biofilm biomass in microplates and cell colonization from PP and PS. pH also had a positive effect on V. vulnificus cell colonization from LDPE and PP. However, most biofilm biomass, biofilm cell and dispersal cell densities of both species greatly varied after exposure to elevated temperature, pH, and nutrient starvation. It was also found that certain exposures to simulated human media affected both V. parahaemolyticus and V. vulnificus biofilm biomass and biofilm cell densities on LDPE, PP and PS compared to exposure to traditional media of similar pH. Cyclic-di-GMP was higher in biofilm cells compared to dispersal cells, but exposure to more stressful conditions significantly increased signal concentrations in both biofilm and dispersal states. Taken together, this study suggests that human pathogenic strains of V. parahaemolyticus and V. vulnificus can rapidly disperse with high cell densities from different plastic types in vitro. However, the biofilm dispersal process is highly variable, species specific and dependent on plastic type, especially under different human body related environmental exposures.

Associations among computed tomographic measures of bone and muscle quality and biomechanical measures of tibiotarsal bone quality in laying hens.

OBJECTIVE: The objectives of the current study were to quantify laying hen sternal carina (keel) and tibiotarsal bone and muscle quality using clinical CT, tissue level, and biomechanical measures; test associations among muscle transverse sectional area, bone mineral density, and biomechanical measures of bone quality; and determine whether CT measures of bone and muscle quality would be predictive of biomechanical measures of tibiotarsal bone quality. ANIMALS: 60 40-week-old Hy-Line brown laying hens were used. METHODS: Associations among CT imaging, tissue level, and biomechanical measures of tibiotarsal and keel bone and muscle quality were tested using multivariate correlational analyses. Bivariate and generalized regressions were performed to determine whether CT measures were predictive of biomechanical measures of tibiotarsal bone quality. RESULTS: Low positive correlations were identified between tibiotarsal muscle transverse-sectional area (cross-sectional area [CSA]) and bone mineral density (BMD) in the proximal location of the bone (r = -0.11 to 0.31). Tibiotarsal muscle CSA was also low to moderately correlated with biomechanical measures of bone quality (r = 0.20 to 0.41). Keel muscle CSA values were not correlated with keel BMD values, but they were correlated with biomechanical measures of tibiotarsal bone quality (r = 0.18 to 0.40). Keel CT measures of bone quality were not correlated with tibiotarsal CT measures of bone quality. At the proximal location, muscle CSA and tibiotarsal BMD were predictive of biomechanical failure load (F = 9.68, P = .0003muscle CSA; F = 9.13, P = .004tibiotarsal BMD). CLINICAL RELEVANCE: Findings supported using noninvasive CT measures of muscle and bone quality in longitudinal research studies evaluating the effects of interventions on laying hen welfare.

Impact of Body-worn Sensors on Broiler Chicken Behavior and Agonistic Interactions.

Technology, like body-worn sensors, enables data collection from similar-looking individuals in large groups but may alter behavior. We aimed to evaluate the impact of body-worn sensors on broiler behavior. Broilers were housed in 8 pens (10 birds/m2). At 21 days-old, 10 birds/pen were fitted with a harness contained a sensor (HAR), while the remaining 10-birds were unharnessed (NON). Behaviors were recorded on days 22-26 using scan sampling (126 scans/day for 5 days). Percent of birds performing behaviors were calculated daily for each group (HAR-or-NON), and agonistic interactions were identified based on birds involved (two NON-birds (N-N), NON-aggressor to HAR-recipient (N-H), HAR-aggressor to NON-recipient (H-N), or two HAR-birds (H-H)). HAR-birds performed locomotory behavior and explored less often than NON-birds (p<0.05). Consummatory behavior was unaffected by treatment on any day (p>0.05). Agonistic interactions occurred more often between NON-aggressor and HAR-recipient birds than other categories on days 22 and 23 (p<0.05). HAR-broilers showed no behavioral differences when compared to NON-broilers after 2 days; thus, a similar acclimation period is required before using body-worn sensors to evaluate broiler welfare without altering behavior.

Vibrio parahaemolyticus and Vibrio vulnificus in vitro colonization on plastics influenced by temperature and strain variability.

Marine bacteria often exist in biofilms as communities attached to surfaces, like plastic. Growing concerns exist regarding marine plastics acting as potential vectors of pathogenic Vibrio, especially in a changing climate. It has been generalized that Vibrio vulnificus and Vibrio parahaemolyticus often attach to plastic surfaces. Different strains of these Vibrios exist having different growth and biofilm-forming properties. This study evaluated how temperature and strain variability affect V. parahaemolyticus and V. vulnificus biofilm formation and characteristics on glass (GL), low-density polyethylene (LDPE), polypropylene (PP), and polystyrene (PS). All strains of both species attached to GL and all plastics at 25, 30, and 35°C. As a species, V. vulnificus produced more biofilm on PS (p ≤ 0.05) compared to GL, and biofilm biomass was enhanced at 25°C compared to 30° (p ≤ 0.01) and 35°C (p ≤ 0.01). However, all individual strains' biofilm biomass and cell densities varied greatly at all temperatures tested. Comparisons of biofilm-forming strains for each species revealed a positive correlation (r = 0.58) between their dry biomass weight and OD570 values from crystal violet staining, and total dry biofilm biomass for both species was greater (p ≤ 0.01) on plastics compared to GL. It was also found that extracellular polymeric substance (EPS) chemical characteristics were similar on all plastics of both species, with extracellular proteins mainly contributing to the composition of EPS. All strains were hydrophobic at 25, 30, and 35°C, further illustrating both species' affinity for potential attachment to plastics. Taken together, this study suggests that different strains of V. parahaemolyticus and V. vulnificus can rapidly form biofilms with high cell densities on different plastic types in vitro. However, the biofilm process is highly variable and is species-, strain-specific, and dependent on plastic type, especially under different temperatures.

Animal welfare assessment of on-farm euthanasia methods for individual, heavy turkeys.

On-farm euthanasia of poultry, including turkeys, may not be possible for most people as birds gain weight; thus alternative mechanical methods have been developed. Our objective was to compare mechanical cervical dislocation with the Koechner Euthanizing Device (KED), captive bolt euthanasia with the Turkey Euthanasia Device (TED), head-only CO2 euthanasia (CO2), and electric euthanasia as potential humane methods for euthanizing individual, heavy turkeys. We assessed their impact on loss of brain stem reflexes, acute distress (corticosterone, CORT), kill success, torn skin, and blood loss. Turkeys (n = 174) were euthanized on 3 sampling days, while birds were restrained using a mobile bird euthanasia apparatus. Brain stem reflexes recorded were the cessation and return of induced nictitating membrane reflex (loss of consciousness and brain stem dysfunction), mouth gaping reflex (brain stem dysfunction), and musculoskeletal movements (spinal cord dysfunction). Overall, KED resulted in more frequent (at 4 min: KED 7 of 14; electric 0 of 13; TED 0 of 11; CO2 2 of 14 birds on day 1) and longer durations of the induced nictitating reflex compared to the other methods (means of day 2 and 3: KED 233; electric 15; TED 15; CO2 15 s). The mouth gaping reflex endured the longest after KED euthanasia (means of day 2 and 3: KED 197; electric 15; TED 51; CO2 15 s). Musculoskeletal movements endured longest after KED euthanasia (means of day 2 and 3: KED 235; electric 15; TED 219; CO2 15 s). Returning reflexes were more frequent after KED and TED compared to CO2 and electric euthanasia, where it was absent. CO2, electric, and TED euthanasia showed comparable kill success (success: CO2 42 out of 43; electric 44 of 45; TED 42 of 44), with KED resulting in most unsuccessful kills (unsuccessful: 8 out of 42). CORT responses were inconsistent. Torn skin and blood loss occurred more frequently after KED and TED compared to CO2 and electric applications. Therefore, we conclude that, based on a comparison of these 4 methods, the most discernibly humane was electric euthanasia, which consistently resulted in quick loss of consciousness within 15 s, no returning reflexes, and no torn skin or blood loss.