Protocol development for real-time ship fuel sulfur content determination using drone based plume sniffing microsensor system.

Pollutants from navigation sector are key contributors to emission inventories of most coastal cities with heavy port activities. The use of high fuel sulfur content (FSC) bunker oil by ocean going vessels (OGVs) has been identified as a major source of sulfur dioxide (SO2). Government authorities all over the world, including Hong Kong government, have implemented air pollution control regulations to cap FSC of fuel used by OGVs to 0.5%, from the existing 3.5%, to reduce SO2 emissions. However, the lack of efficient screening tools to identify non-compliant OGVs has prevented effective enforcement. This study developed and evaluated an unmanned aerial vehicle (UAV)-borne lightweight (750 g) microsensor system (MSS), which is capable of measuring ship plume SO2, NO2, NO, CO2, CO, and particulate matter in real-time. Extensive experiments were conducted on the sensor system to evaluate its performance during laboratory and field operations. The effects of cross-sensitivity and meteorological conditions were studied and incorporated to account for the measurement conditions in dispersed ship plumes. The SO2 to CO2 concentration ratio-based FSC expression was formulated as per the 2016 European Union Directive and Regulations. Furthermore, the impact of plume dilution on the accuracy of FSC measurement was investigated at different stages using the MSS, with and without the UAV in both simulated conditions and real-world scenarios, maintaining a safe distance from the OGV exhaust stacks. The study demonstrates the robustness of using UAV-borne sensor system for ship emission sniffing and FSC determination. The results will assist in development of a technological framework for effective enforcement of ship emission control regulations.

Ceramic-metal composites for heat exchangers in concentrated solar power plants.

The efficiency of generating electricity from heat using concentrated solar power plants (which use mirrors or lenses to concentrate sunlight in order to drive heat engines, usually involving turbines) may be appreciably increased by operating with higher turbine inlet temperatures, but this would require improved heat exchanger materials. By operating turbines with inlet temperatures above 1,023 kelvin using closed-cycle high-pressure supercritical carbon dioxide (sCO2) recompression cycles, instead of using conventional (such as subcritical steam Rankine) cycles with inlet temperatures below 823 kelvin1-3, the relative heat-to-electricity conversion efficiency may be increased by more than 20 per cent. The resulting reduction in the cost of dispatchable electricity from concentrated solar power plants (coupled with thermal energy storage4-6) would be an important step towards direct competition with fossil-fuel-based plants and a large reduction in greenhouse gas emissions7. However, the inlet temperatures of closed-cycle high-pressure sCO2 turbine systems are limited8 by the thermomechanical performance of the compact, metal-alloy-based, printed-circuit-type heat exchangers used to transfer heat to sCO2. Here we present a robust composite of ceramic (zirconium carbide, ZrC) and the refractory metal tungsten (W) for use in printed-circuit-type heat exchangers at temperatures above 1,023 kelvin9. This composite has attractive high-temperature thermal, mechanical and chemical properties and can be processed in a cost-effective manner. We fabricated ZrC/W-based heat exchanger plates with tunable channel patterns by the shape-and-size-preserving chemical conversion of porous tungsten carbide plates. The dense ZrC/W-based composites exhibited failure strengths of over 350 megapascals at 1,073 kelvin, and thermal conductivity values two to three times greater than those of iron- or nickel-based alloys at this temperature. Corrosion resistance to sCO2 at 1,023 kelvin and 20 megapascals was achieved10 by bonding a copper layer to the composite surface and adding 50 parts per million carbon monoxide to sCO2. Techno-economic analyses indicate that ZrC/W-based heat exchangers can strongly outperform nickel-superalloy-based printed-circuit heat exchangers at lower cost.

Clinical efficacy of a specifically targeted antimicrobial peptide mouth rinse: targeted elimination of Streptococcus mutans and prevention of demineralization.

BACKGROUND/AIMS: Streptococcus mutans, the major etiological agent of dental caries, has a measurable impact on domestic and global health care costs. Though persistent in the oral cavity despite conventional oral hygiene, S. mutans can be excluded from intact oral biofilms through competitive exclusion by other microorganisms. This suggests that therapies capable of selectively eliminating S. mutans while limiting the damage to the normal oral flora might be effective long-term interventions to fight cariogenesis. To meet this challenge, we designed C16G2, a novel synthetic specifically targeted antimicrobial peptide with specificity for S. mutans. C16G2 consists of a S. mutans-selective 'targeting region' comprised of a fragment from S. mutans competence stimulation peptide (CSP) conjoined to a 'killing region' consisting of a broad-spectrum antimicrobial peptide (G2). In vitro studies have indicated that C16G2 has robust efficacy and selectivity for S. mutans, and not other oral bacteria, and affects targeted bacteria within seconds of contact. METHODS: In the present study, we evaluated C16G2 for clinical utility in vitro, followed by a pilot efficacy study to examine the impact of a 0.04% (w/v) C16G2 rinse in an intra-oral remineralization/demineralization model. RESULTS AND CONCLUSIONS: C16G2 rinse usage was associated with reductions in plaque and salivary S. mutans, lactic acid production, and enamel demineralization. The impact on total plaque bacteria was minimal. These results suggest that C16G2 is effective against S. mutans in vivo and should be evaluated further in the clinic.

A probiotic approach to caries management.

The surgical approach has been the predominate mode of caries management for the past 150 years. Dentistry has, however, in recent years moved toward an antibiotic/antimicrobial model of disease management. This approach, however, raises serious questions: (1) do the antibiotic/antimicrobial agents (chlorhexidine, povidone iodine, fluoride, etc) kill all offending organisms?; (2) if so, do the agents preclude the re-entry of the same organisms from external sources?; and (3) if the agents do kill all the offending organisms, do any remaining pathogenic organisms have selective advantage in repopulating the tooth surfaces? To overcome the problems inherent in an antibiotic/antimicrobial approach, probiotic methods are currently under study as means of caries management. This paper discusses probiotic approaches, such as genetically modified Streptococcus mutans and targeted antimicrobials in the management of dental caries. Implications for this approach in the management of other diseases are also presented.

Present treatment options for atrial fibrillation.

Atrial fibrillation is the commonest sustained cardiac arrhythmia. It accounts for >35% of all hospital admissions for cardiac arrhythmias in the United States. The presence of atrial fibrillation increases the mortality of a population by up to twofold. The risk of stroke increases from 1.5% in patients with atrial fibrillation from 50-59 years of age to up to 23.5% for such patients aged 80-89 years. Although the diagnosis of atrial fibrillation is usually straightforward, effective treatment is not. This article will discuss how rhythm control of atrial fibrillation can best be achieved, the controversy over the rhythm versus rate control, the maintenance of sinus rhythm with antiarrhythmic drugs after cardioversion, and prevention of thromboembolism. Finally, the recent advances in various non-pharmacological approaches for the treatment of atrial fibrillation will be highlighted.

Bacterial biofilm and dentistry.

Bacterial biofilms are ubiquitous in nature. Recent studies have demonstrated many unique qualities previously unknown to bacteria and have yielded new insights into relevant dental issues.

Air abrasion in an era of declining caries.

As with all therapeutic and diagnostic technologies (both new and old), diagnostic tools must be applied in the context of the diseases they affect. This article examines the evidence for the use of air abrasion as a diagnostic tool in a time of declining dental caries. This examination is accomplished by first being clear about what evidence should be acceptable to clinicians to make any diagnostic or therapeutic changes in their practice. It then examines the evidence as it relates to air abrasion and the diagnosis of dental caries.

Clinical success of class V composite resin restorations without mechanical retention.

The authors describe a study in which they placed 126 Class V composite resin restorations without mechanical retention, divided into three groups of 42, in 23 patients. They followed the performance of the restorations over a three-year period. For all three groups, restorations were placed using All-Bond 2 dental adhesive and Z100 composite resin; A.R.T. Bond and Brilliant Dentin composite; and Prisma Universal Bond 3 and Variglass VLC polyacid-modified composite resin. The authors evaluated retention as well as color stability, wear resistance, sensitivity, sulcular depth, loss of attachment, bleeding on probing and crevicular fluid flow. Based on their results, the authors propose that restoration of Class V lesions without using mechanical retention could be expected to succeed in seven of 10 restorations over a three-year period using these restorative systems.

Effectiveness of electronic dental anesthesia for restorative care in children.

The effectiveness of electronic dental anesthesia (EDA) for pain control during restorative procedures was compared with local anesthetic injection (LA) in 32 children aged 6 to 12 years. Each child selected had two antimere primary or permanent molars requiring similar-sized Class I or Class II restorations. The pain levels during restorative treatment were assessed using a visual analogue scale. Heart rates and behavior were also recorded. A crossover design was used with each child acting as his/her own control. The results showed that overall, EDA was less effective than LA for cavity preparation. The reported pain scores for EDA were higher in permanent teeth for the deeper cavities, and with one of the operators. The pre- or post-treatment anxiety scores were not found to differ significantly between the two restorative appointments. However, children with the highest pretreatment scores were more likely to report higher pain scores with EDA. Despite this, 63% of the children preferred EDA to LA. Dental anxiety, cavity depth, the tooth being treated, and operator attitude may also be important factors in determining the success of EDA.

Fourth-harmonic generation at a crystalline GaAs(001) surface.

We demonstrate fourth-harmonic generation from a GaAs(001) surface by using femtosecond pulses well below damage threshold. Our data reveal a strong fourfold anisotropic surface-specific polarization that is not present in second-harmonic generation and is nearly as strong as the bulk polarization.

Inappropriate shocks in patients receiving internal cardioverter-defibrillators for malignant ventricular arrhythmias.

Implantation of internal cardioverter defibrillators (ICDs) for treatment of malignant ventricular arrhythmias is complicated by failure of therapy or inappropriate shocks. We studied 81 patients (age range 16-72 years; mean 48 +/- 13 years) who underwent ICD implantation for device therapy. The underlying aetiology was ischaemic heart disease (39%), cardiomyopathies (32%) and others (28%). Information regarding shocks was collected using Holter monitoring, telemetry or device memory (stored electrograms) and lastly by clinical follow-up. Fifty-eight patients completed 36 months of follow-up. Thirty-five patients experienced 337 spontaneous shocks, appropriate in 21, inappropriate in 12, and both in two patients. Of the 74 episodes of inappropriate discharges for rhythms other that ventricular tachycardia (VT) or ventricular fibrillation(VF), 55 percent were due to supraventricular arrhythmias (atrial flutter or fibrillation). Lead malfunction occurred in four and the device was replaced in two. Additional drugs controlled AF in one. There was no mortality in any of the 81 patients. The frequency of shocks was highest in the first six months after implantation and atrial fibrillation remains the main cause. In conclusion, inappropriate shocks are frequent in patients undergoing ICD implantation.

Femtosecond carrier-induced screening of dc electric-field-induced second-harmonic generation at the Si(001) SiO(2) interface.

Carrier-induced screening of the dc electric field at the Si(001)-SiO(2) interface is observed by intensity-dependent and femtosecond-time-resolved second-harmonic spectroscopy. The screening occurs on a time scale of ~?(p)(-1) , the reciprocal plasma frequency of the generated carriers.

Performance of basic ventricular tachycardia detection algorithms in implantable cardioverter defibrillators: implications for device programming.

Around 20% of patients with third generation implantable cardioverter defibrillators receive inappropriate therapy, usually triggered by atrial fibrillation. This is because the criteria used for ventricular tachycardia detection by current implantable cardioverter defibrillators are based on the analysis of a sequence of RR intervals and may be inappropriately satisfied by supraventricular tachyarrhythmias. Algorithms for ventricular tachycardia detection were challenged against the full RR interval sequences from 482 spontaneous episodes of atrial fibrillation and 260 spontaneous episodes of ventricular tachycardia to determine their ability to discriminate between the arrhythmias. The sensitivities and specificities of the algorithms were calculated over a wide range of programmable parameters. For a given window length and detection interval, the most stringent algorithms, that required all beats to be classified as "fast", were more specific than those allowing a proportion of "normal" intervals, even after adjustment for differing sensitivity. These differences were less marked for faster tachycardias. Specificity increased with the detection window length to a limit of approximately 18 beats. We conclude that ventricular tachycardia is detected with the highest specificity if all beats in an analyzed sequence are required to be "fast," even after lengthening of the tachycardia detection interval to maintain sensitivity. Further improvement in algorithm performance may require the incorporation of criteria such as tachycardia onset and stability.

Catheter ablation for successful management of left posterior fascicular tachycardia: an approach guided by recording of fascicular potentials.

OBJECTIVE: To assess whether catheter ablation of fascicular tachycardia can be facilitated by the recording of sharp deflections arising from the mid-septum---inferior apical septum of the left ventricle. PATIENTS AND METHODS: Seven consecutive patients (mean age 29 (range 16-43) years) with ventricular tachycardia originating from the left posterior fascicle underwent electrophysiology study and detailed mapping of endocardial activation. Selection of ablation sites in the last five patients was based on the recording, during left posterior fascicular tachycardia and sinus rhythm, of a discrete potential preceding the earliest ventricular electrogram, which was thought to represent conduction through the posterior fascicle. RESULTS: Patients were treated with low energy direct current or radiofrequency current ablation. The median fluoroscopy and procedure times were 23 (range 6-42) min and 110 (range 50-176) min, respectively. In a follow up period of 4 to 16 months, six patients were asymptomatic and one had minor symptoms. No patient had any change in intraventricular conduction. Similar potentials were also recorded from the left posterobasal septum in three of eight patients who underwent catheter ablation of left free wall accessory pathways. CONCLUSION: Fascicular potentials can be reproducibly recorded in left posterior fascicular tachycardia and may serve as a reliable marker for successful ablation procedures. The relation of these potentials with the substrate of the tachycardia, however, remains obscure.

Observation of bose-einstein condensation in a dilute atomic vapor.

A Bose-Einstein condensate was produced in a vapor of rubidium-87 atoms that was confined by magnetic fields and evaporatively cooled. The condensate fraction first appeared near a temperature of 170 nanokelvin and a number density of 2.5 x 10(12) per cubic centimeter and could be preserved for more than 15 seconds. Three primary signatures of Bose-Einstein condensation were seen. (i) On top of a broad thermal velocity distribution, a narrow peak appeared that was centered at zero velocity. (ii) The fraction of the atoms that were in this low-velocity peak increased abruptly as the sample temperature was lowered. (iii) The peak exhibited a nonthermal, anisotropic velocity distribution expected of the minimum-energy quantum state of the magnetic trap in contrast to the isotropic, thermal velocity distribution observed in the broad uncondensed fraction.