Efficient aqueous molybdenum removal using commercial Douglas fir biochar and its iron oxide hybrids.

Molybdenum (Mo) is a naturally-occurring trace element in drinking water. Most commonly, molybdate anions (MoO42-) are in well water and breast milk. In addition, it is used in medical image testing. Recently, the EPA classified Mo as a potential contaminant, as exposure can lead to health effects such as gout, hyperuricemia, and even lung cancer. We have assessed the sorptive removal of aqueous molybdate using Douglas fir biochar (DFBC) and a hybrid DFBC/Fe3O4 composite containing chemically-coprecipitated iron oxide (Fe3O4). Adsorption was studied at various: pH values, equilibrium times (5 min-24 h), initial Mo concentrations (2.5-1000 mg/L), and temperatures (5, 25, and 40 °C) using batch sorption and fixed-bed column equilibrium methods. Langmuir capacities for DFBC and DFBC/Fe3O4 (at pH 3, 2 hrs equilibrium) were within 459.3-487.9 mg/g and 288-572 mg/g, respectively. These adsorbents and their Mo-laden counterparts were characterized by elemental analysis, BET, PZC, SEM, TEM, EDS, XRD, and XPS. MoO42- adsorption on DFBC is thought to be governed primarily via electrostatic attraction. Adsorption by DFBC/Fe3O4 is primarily governed by chemisorption onto magnetite surface hydroxyl groups, while electrostatics prevail in the DFBC-exposed phase. Stoichiometric precipitation of iron molybdates triggered by iron dissolution was also considered. The data suggest that DFBC and DFBC/Fe3O4 are promising candidates for molybdate sorption.

Batch and fixed bed sorption of low to moderate concentrations of aqueous per- and poly-fluoroalkyl substances (PFAS) on Douglas fir biochar and its Fe3O4 hybrids.

Per- and poly-fluoroalkyl substances (PFAS) can cause deleterious effects at low concentrations (70 ng/L). Their remediation is challenging. Aqueous µg/L levels of PFOS, PFOS, PFOSA, PFBS, GenX, PFHxS, PFPeA, PFHxA, and PFHpA (abbreviations defined in Table 1) multi-component adsorption (pH dependence, kinetics, isotherms, fixed-bed adsorption, regeneration, complex matrix) was studied on commercial Douglas fir biochar (BC) and its Fe3O4-containing BC. BC is a waste product when syn-gas is produced in a large scale from wet Douglas fir wood fed to gasification at 900-1000 °C and held for 1-20 s. This generates a relatively high surface area (∼700 m2/g) and large pore volume (∼0.25 cm3/g) biochar. Treatment of BC with FeCl3/FeSO4 and NaOH to chemically precipitate Fe3O4 onto BC. BC and its magnetic Fe3O4/BC analogue rapidly adsorbed (20-45 min equilibrium time) significant amounts of PFOS (∼14.6 mg/g) and PFOA (∼652 mg/g) at natural waters' pH range (6-8). Adsorption from µg/L concentrations has produced remediated aqueous PFAS concentrations of ∼50 ng/L or below the detection limits, which is closing in on EPA advisory limits. Column capacities of PFOS were 215.3 mg/g on BC and 51.9 mg/g Fe3O4/BC vs 53.0 mg/g and 21.8 mg/g, respectively, for PFOA. Hydrophobic and electrostatic interactions are thought to drive this sorption. Successful stripping regeneration by methanol was achieved. Thus, hydrophobic Douglas fir biochar produced by fast high temperature pyrolysis and its Fe3O4/BC analogue are adsorbent candidates for PFAS remediation from the dilute PFAS concentrations often found in polluted environments. Small Fe3O4/BC particles can be magnetically removed from batch treatments avoiding filtration.