Unusually Large Ligand Field Splitting in Anionic Europium(III) Complexes Induced by a Small Imidazolic Counterion.

Luminescent trivalent lanthanide (Ln3+) complexes are compounds of technological interest due to their unique photophysical properties, particularly anionic tetrakis complexes, given their higher stability and emission quantum yields. However, structural studies on the cation-anion interaction in these complexes and the relation of such to luminescence are still lacking. Herein, the cation-anion interactions in two luminescent anionic tetrakis(2-thenoyltrifluoroacetonato)europate(III) complexes with alkylimidazolium cations, specifically 1-ethyl-3-methylimidazolium and 1-butyl-3-methylimidazolium are investigated. The Eu3+ complexes were synthesized and characterized by elemental analysis, mass spectrometry, and single-crystal X-ray crystallography, and their luminescence spectra were recorded at 77 K. Quantum chemical calculations were also performed. X-ray crystallography revealed hydrogen bonds between the enolate ligands and imidazolium ring hydrogens. The 1-butyl-3-methylimidazolium complex had two crystallographic Eu3+ sites, also confirmed by luminescence spectroscopy. The 1-ethyl-3-methylimidazolium complex exhibited an unusual 300 cm-1 splitting in the 5D0 → 7F1 transition, as reproduced by ligand field calculations, suggesting a stronger hydrogen bonding due to the smaller substituent. We hypothesize that this strong bonding likely causes angular distortions, resulting in high ligand field splittings.

The Coiling Effect in Ether Ionic Liquids: Exploiting Acetate as a Probe for Transport Properties and Microenvironment Analysis.

The inherently high viscosity of ionic liquids (ILs) can limit their potential applications. One approach to address this drawback is to modify the cation side chain with ether groups. Herein, we assessed the structure-property relationship by focusing on acetate (OAc), a strongly coordinating anion, with 1,3-dialkylimidazolium cations with different side chains, including alkyl, ether, and hydroxyl functionalized, as well as their combinations. We evaluated their viscosity, thermal stabilities, and microstructure using Raman and infrared (IR) spectroscopies, allied to density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulations. The viscosity data showed that the ether insertion significantly enhances the fluidity of the ILs, consistent with the coiling effect of the cation chain. Through a combined experimental and theoretical approach, we analyzed how the OAc anion interacts with ether ILs, revealing a characteristic bidentate coordination, particularly in hydroxyl functionalized ILs due to specific hydrogen bonding with the OH group. IR spectroscopy showed subtle shifts in the acidic hydrogens of imidazolium ring C(2)-H and C(4,5)-H, suggesting weaker interactions between OAc and the imidazolium ring in ether-functionalized ILs. Additionally, spatial distribution functions (SDF) and dihedral angle distribution obtained via AIMD confirmed the intramolecular hydrogen bonding due to the coiling effect of the ether side chain.

Biofragmentation of Polystyrene Microplastics: A Silent Process Performed by Chironomus sancticaroli Larvae.

Polystyrene (PS) is one of the main synthetic polymers produced around the world, and it is present in the composition of a wide variety of single-use objects. When released into the environment, these materials are degraded by environmental factors, resulting in microplastics. We investigated the ability of Chironomus sancticaroli (Diptera, Chironomidae) to promote the fragmentation of PS microspheres (24.5 ± 2.9 µm) and the toxic effects associated with exposure to this polymer. C. sancticaroli larvae were exposed to 3 different concentrations of PS (67.5, 135, and 270 particles g-1 of dry sediment) for 144 h. Significant lethality was observed only at the highest concentration. A significant reduction in PS particle size as well as evidence of deterioration on the surface of the spheres, such as grooves and cracks, was observed. In addition, changes in oxidative stress biomarkers (SOD, CAT, MDA, and GST) were also observed. This is the first study to report the ability of Chironomus sp. to promote the biofragmentation of microplastics. The information obtained demonstrates that the macroinvertebrate community can play a key role in the degradation of plastic particles present in the sediment of freshwater environments and can also be threatened by such particle pollution.

Multiconfigurational Calculations and Experimental Resonant Raman/SERRS of a Donor-Acceptor Thiadiazole Dye.

The resonant Raman (RR) and resonant SERS spectra of the thiadiazole-based dye dibromobenzo[c]-1,2,5-thiadiazole (DBTD) were studied through multiconfigurational XMS-CASPT2/CASSCF and experimental methods in solution. The results indicate that the S1 excited state of DBTD is described by π → π* with internal CT from the benzene ring to the thiadizole. In resonance conditions at 364 nm, the RR spectrum shows intensifications in modes that describe extensive geometrical changes at both the benzene ring and the thiadiazole region, indicating an internal CT character to the S1. The SERS spectra observed on gold and silver nanoparticles indicate different adsorption geometries, which leads to distinct enhancement patterns on the spectra with varying excitation energy. It evidences the major contribution of the chemical enhancement mechanism on the spectra from a metal → DBTD CT state, as confirmed by the simulated spectra. This theoretical approach proved strong in the prediction of the main features of the observed experimental resonant Raman and SERS spectra indicating a potential for adequate description of the chemical mechanism of SERS.

Simulation of charge-transfer, UV-VIS and resonance Raman spectra of push-pull systems: a TDDFT and CASPT2 comparison.

Time-Dependent Density-Functional Theory (TDDFT) and Extended Multi-State Complete Active Space Second-Order Perturbation Theory (XMS-CASPT2) methods, together with augmented correlation-consistent polarizable valence double-ζ (aug-cc-pVDZ) basis sets, were applied to simulate the vibronic and resonance Raman (RR) spectra of a push-pull model system, 4-nitroaniline (pNA) and its anion ([pNA]-), within the Independent Mode Displaced Harmonic Oscillator (IMDHO) model. Both methods predict adequately well the vertical absorption spectra for both species and the well-known charge-transfer (CT; S11(ππ*)) excited state of pNA. Nevertheless, pNA and [pNA]- absorption spectral band intensity and vibronic broadening are better reproduced at the XMS-CASPT2 level. RR spectra were also obtained using both methods, with a good agreement for both methods for pNA, for which the electronic wave functions are best described by a single state configuration. For the anion, for which the excited state presented a multiconfigurational nature, the TDDFT failed to predict the main intensification observed experimentally under resonance conditions. As to the resonance Raman excitation profile for the pNA species, the νS(NO2) vibrational mode carries most of the intensity of the vibronic spectrum, but for [pNA]- the contributions of main vibrational modes are more complex, being governed by different modes in different energies, with ring modes dominating at the maximum, as predicted by the XMS-CASPT2 method.

Tuning the Mechanical and Thermal Properties of Hydroxypropyl Methylcellulose Cryogels with the Aid of Surfactants.

The mechanical and thermal properties of cryogels depend on their microstructure. In this study, the microstructure of hydroxypropyl methylcellulose (HPMC) cryogels was modified by the addition of ionic (bis (2-ethylhexyl) sodium sulfosuccinate, AOT) and non-ionic (Kolliphor® EL) surfactants to the precursor hydrogels (30 g/L). The surfactant concentrations varied from 0.2 mmol/L to 3.0 mmol/L. All of the hydrogels presented viscous behavior (G″ > G'). Hydrogels containing AOT (c > 2.0 mmol/L) led to cryogels with the lowest compressive modulus (13 ± 1 kPa), the highest specific surface area (2.31 m2/g), the lowest thermal conductivity (0.030 W/(m·°C)), and less hygroscopic walls. The addition of Kolliphor® EL to the hydrogels yielded the stiffest cryogels (320 ± 32 kPa) with the lowest specific surface area (1.11 m2/g) and the highest thermal conductivity (0.055 W/(m·°C)). Density functional theory (DFT) calculations indicated an interaction energy of -31.8 kcal/mol due to the interaction between the AOT sulfonate group and the HPMC hydroxyl group and the hydrogen bond between the AOT carbonyl group and the HPMC hydroxyl group. The interaction energy between the HPMC hydroxyl group and the Kolliphor® EL hydroxyl group was calculated as -7.91 kcal/mol. A model was proposed to describe the effects of AOT or Kolliphor® EL on the microstructures and the mechanical/thermal properties of HPMC cryogels.

SERS and resonance Raman of 5-nitroisatin on silver - The distinction between the coordination and surface complexes.

Although Surface Enhanced Raman Spectroscopy (SERS) is a widespread technique with applications in several fields, the SERS effect is still not thoroughly understood due to the challenge in describing how the interaction between the analyte and the metallic surface contributes to the Raman signal enhancement. One approach to distinguish the charge transfer contribution from the metal to the molecule is the comparison of the coordination complex resonance Raman spectral features with the SERS spectra of the surface complex excited at different wavelengths. Herein, we investigated the molecule 5-nitroisatin, Nisa, its complex with a silver cation, Ag(Nisa), its anionic form, Nisa-, and the adsorbed species over Ag colloid, Nisa/AgNP, by resonance Raman and SERS, respectively. The data show that the resonance Raman spectrum of the coordination complex Ag(Nisa) is comparable to the SERS spectrum obtained out of resonance condition. However, when the SERS spectra of Nisa/AgNP at resonance condition is obtained, quite distinct chromophores are observed. The SERS enhancement profile suggests a charge transfer from the metal to molecule in the green region of the visible spectrum and evidences the higher complexity of the electronic transitions that take place within the surface complex. To support the experimental data, DFT and TDDFT calculations were performed for Nisa, Ag(Nisa), Nisa- and Nisa@Ag20 cluster.

Fast, low-cost preparation of hackmanite minerals with reversible photochromic behavior using a microwave-assisted structure-conversion method.

A microwave-assisted structure-conversion (MASC) method was used to obtain photochromic hackmanites (M,Na)8Al6Si6O24(Cl,S)2 (M: Li, Na, and K) in a fast (12 to 20 min) one-step process. Structural conversion from Zeolite A to hackmanite minerals has been proven to be very effective through an aluminosilicate crystalline intermediate. Photochromism is observed with both UV and X-ray (CuKα) excitation.

Marrying SPR excitation and metal-support interactions: unravelling the contribution of active surface species in plasmonic catalysis.

Plasmonic catalysis takes advantage of the surface plasmon resonance (SPR) excitation to drive or accelerate chemical transformations. In addition to the plasmonic component, the control over metal-support interactions in these catalysts is expected to strongly influence the performances. For example, CeO2 has been widely employed towards oxidation reactions due to its oxygen mobility and storage properties, which allow for the formation of Ce3+ sites and adsorbed oxygen species from metal-support interactions. It is anticipated that these species may be activated by the SPR excitation and contribute to the catalytic activity of the material. Thus, a clear understanding of the role played by the SPR-mediated activation of surface oxide species at the metal-support interface is needed in order to take advantage of this phenomenon. Herein, we describe and quantify the contribution from active surface oxide species at the metal-support interface (relative to O2 from air) to the activities in green SPR-mediated oxidation reactions. We employed CeO2 decorated with Au NPs (Au/CeO2) as a model plasmonic catalyst and the oxidation of p-aminothiophenol (PATP) and aniline as proof-of-concept transformations. We compared the results with SiO2 decorated with Au NPs (Au/SiO2), in which the formation of surface oxide species at the metal-support interface is not expected. We found that the SPR-mediated activation of surface oxide species at the metal-support interface in Au/CeO2 played a pivotal role in the detected activities, being even higher than the contribution coming from the activation of O2 from air.

Probing the solvation structure and dynamics in ionic liquids by time-resolved infrared spectroscopy of 4-(dimethylamino)benzonitrile.

In this work we demonstrate the use of the push-pull model system 4-(dimethylamino)benzonitrile (DMABN) as a convenient molecular probe to investigate the local solvation structure and dynamics by means of time-resolved infrared spectroscopy (TRIR). The photochemical features associated with this system provide several advantages due to the high charge separation between the ground and charge transfer states involving the characteristic nitrile bond, and an excited state lifetime that is long enough to observe the slow solvation dynamics in organic solvents and ionic liquids. The conversion from a locally excited state to an intramolecular charge transfer state (LE-ICT) in ionic liquids shows similar kinetic lifetimes in comparison to organic solvents. This similarity confirms that such conversion depends solely on the intramolecular reorganization of DMABN in the excited state, and not by the dynamics of solvation. In contrast, the relative shift of the ν(CN) vibration during the relaxation of the ICT state reveals two distinct lifetimes that are sensitive to the solvent environment. This study reveals a fast time component which is attributed to the dipolar relaxation of the solvent and a slower time component related to the rotation of the dimethylamino group of DMABN.

Dead biomass of Amazon yeast: A new insight into bioremediation and recovery of silver by intracellular synthesis of nanoparticles.

This investigation was undertaken to describe a natural process for the removal of silver and the simultaneous recovery of Ag/Ag2O nanoparticles by dead biomass of the yeast Rhodotorula mucilaginosa. The removal of silver ions from aqueous solution and the synthesis of Ag/Ag2O nanoparticles were analyzed based on physicochemical factors and equilibrium concentration, combined with transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and infrared spectroscopy (FTIR). A successful process for the synthesis of Ag/Ag2O nanoparticles was obtained, following the Langmuir isotherm model, showing a high biosorption capacity of silver (49.0 mg g-1). The nanoparticles were spherical, had an average size of 11.0 nm, were synthesized intracellularly and capped by yeast proteins. This sustainable protocol is an attractive platform for the industrial-scale production of silver nanoparticles and of a silver nanobiosorbent.

The thermochromic behavior of aromatic amine-SO2 charge transfer complexes.

The distinct thermochromism observed in solutions containing N,N-dimethylaniline (DMA) and N,N-diethylaniline (DEA) and SO2 was investigated by resonance Raman spectroscopy in a wide range of temperatures. The results indicate in addition to the charge transfer (CT) complexes DMA-SO2 and DEA-SO2, the presence of collision complexes involving the CT complexes and excess DMA and DEA molecules. The latter in fact is the chromophore responsible for the long wavelength absorption originating the color. The Raman signature of the collision complex was attributed to the distinct enhancement of a band at 1140cm-1 assigned to νs(SO2), in contrast to the same mode in the 1:1 complex at 1115cm-1. The intensity of such band, assigned to the collision complex is favored at high temperatures and depends on the steric hindrance associated to amines, as well as the SO2 molar fraction. Quantum chemical calculations based on time-dependent density functional theory (TDDFT) support the proposed interpretation.

Molecular dynamics and a spectroscopic study of sulfur dioxide absorption by an ionic liquid and its mixtures with PEO.

An investigation comprising experimental techniques (absorption capacity of SO2 and vibrational spectroscopy) and molecular simulations (thermodynamics, structure, and dynamics) has been performed for the polymer poly(ethylene oxide) (PEO), the ionic liquid butyltrimethylammonium bis(trifluoromethylsulfonyl)imide ([N4111][Tf2N]) and their mixtures as sulfur dioxide (SO2) absorbing materials. The polymer PEO has higher capacity to absorb SO2 than the neat ionic liquid, whereas the mixtures presented intermediary absorption capacities. The band assigned to the symmetric stretching band of SO2 at ca. 1140 cm-1, which is considered a spectroscopic probe for the strength of SO2 interactions with its neighborhood, shifts to lower wavenumbers as more negative total interaction energy values of SO2 were evaluated from the simulations. The solvation free energy of SO2, ΔGsol, correlates linearly with the absorption capacity of SO2. The negative values of ΔGsol are due to negative and positive values of enthalpy and entropy, respectively. In the ionic liquid, SO2 weakens the cation-anion interactions, whereas in the mixture with a high content of PEO these interactions are slightly increased. Such effects were correlated with the relative population of cisoid and transoid conformers of Tf2N anions as revealed by Raman spectroscopy. Moreover, the presence of SO2 in the systems provokes the increase of diffusion coefficients of the absorbing species in comparison with the systems without the gas. Proper to the slow dynamics of the polymer, the diffusion coefficient of ions and SO2 diminishes with the increase of the PEO content.

Plasmonic Nanorattles as Next-Generation Catalysts for Surface Plasmon Resonance-Mediated Oxidations Promoted by Activated Oxygen.

Nanorattles, comprised of a nanosphere inside a nanoshell, were employed as the next generation of plasmonic catalysts for oxidations promoted by activated O2 . After investigating how the presence of a nanosphere inside a nanoshell affected the electric-field enhancements in the nanorattle relative to a nanoshell and a nanosphere, the SPR-mediated oxidation of p-aminothiophenol (PATP) functionalized at their surface was investigated to benchmark how these different electric-field intensities affected the performances of Au@AgAu nanorattles, AgAu nanoshells and Au nanoparticles having similar sizes. The high performance of the nanorattles enabled the visible-light driven synthesis of azobenzene from aniline under ambient conditions. As the nanorattles allow the formation of electromagnetic hot spots without relying on the uncontrolled aggregation of nanostructures, it enables their application as catalysts in liquid phase under mild conditions using visible light as the main energy input.

Surface enhanced Raman spectroelectrochemistry of a µ-oxo triruthenium acetate cluster: an experimental and theoretical approach.

Surface enhanced Raman spectroelectrochemistry (SERS) spectroelectrochemistry provides a very sensitive technique to investigate the vibrational characteristics of coordination compounds and their particular behavior under the influence of plasmonic surfaces, concomitant with the exploitation of their redox properties and electronic spectra. The results, however, depend upon the mechanisms involved in the intensification of Raman spectra associated with the electromagnetic, resonance Raman and charge-transfer excitation at the Fermi levels. By probing the model complex [(Ru3O)(CH3COO)6(4,4'-bipy)3](n) (n = 1, 0, -1) adsorbed onto rough gold electrode surfaces, contrasting SERS profiles were obtained at several successive redox potentials and oxidation states, which enables a critical discussion on the role of the complex interaction with the gold surface, and the influence of the specific electronic bands in the triruthenium acetate cluster. Density functional theory (DFT) and time-dependent DFT calculations were carried out for the complex bound to an Au20 cluster to show the participation of active lowest unoccupied molecular orbital levels centered on the gold atoms. The corresponding charge-transfer band was predicted around 1200 nm, which supports a charge-transfer interpretation for the SERS response observed at λexc = 1064 nm. The selective enhancement of the vibrational modes was discussed based on the Raman theoretical calculations.

The Fault in Their Shapes: Investigating the Surface-Plasmon-Resonance-Mediated Catalytic Activities of Silver Quasi-Spheres, Cubes, Triangular Prisms, and Wires.

The surface-plasmon-resonance (SPR)-mediated catalytic activities of Ag and Au nanoparticles have emerged a relatively new frontier in catalysis in which visible light can be employed as an eco-friendly energy input to drive chemical reactions. Although this phenomenon has been reported for a variety of transformations, the effect of the nanoparticle shape and crystalline structure on the activities remains unclear. In this paper, we investigated the SPR-mediated catalytic activity of Ag quasi-spheres, cubes, triangular prisms, and wires toward the oxidation of p-aminothiophenol to p,p'-dimercaptoazobenzene by activated O2. The activities at 632.8 nm excitation followed the order triangular prisms and quasi-spheres > wires ≫ cubes. These results indicated that the shape, optical properties, and crystal structure played an important role in the detected SPR-mediated activities.

Physicochemical properties of three ionic liquids containing a tetracyanoborate anion and their lithium salt mixtures.

Given their relevant physicochemical properties, ionic liquids (ILs) are attracting great attention as electrolytes for use in different electrochemical devices, such as capacitors, sensors, and lithium ion batteries. In addition to the advantages of using ILs containing lithium cations as electrolytes in lithium ion batteries, the Li(+) transport in ILs containing the most common anion, bis(trifluoromethanesulfonyl) imide anion ([Tf2N]), is reportedly small; therefore, its contribution to the overall conductivity is also low. In this work, we describe the preparation and characterization of two new and one known IL containing the tetracyanoborate anion ([B(CN)4]) as the anionic species. These ILs have high thermal and chemical stabilities, with almost twice the ionic conductivity of the [Tf2N] ILs and, most importantly, provide a greater role for the Li(+) ion throughout the conductivity process. The experimental ionic conductivity and self-diffusion coefficient data show that the [B(CN)4]-based ILs and their Li(+) mixtures have a higher number of charge carriers. Molecular dynamics simulations showed a weaker interaction between Li(+) and [B(CN)4] than that with [Tf2N]. These results may stimulate new applications for ILs that have good Li(+) transport properties.

Bioremediation from wastewater and extracellular synthesis of copper nanoparticles by the fungus Trichoderma koningiopsis.

This is the first study describing the rapid extracellular production of copper nanoparticles by dead biomass of Trichoderma koningiopsis. The production and uptake of copper nanoparticles by dead biomass of Trichoderma koningiopsis were characterized by investigating physicochemical factors, equilibrium concentrations and biosorption kinetics, combined with scanning electron microscopy (SEM), energy dispersive X-ray (EDS), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). A successful route for the metallic copper nanoparticles synthesis was achieved, and followed a Langmuir isotherm where a high biosorption capacity was observed, 21.1 mg g(-1). The kinetic analysis showed that copper biosorption followed a pseudo-second-order model. The nanoparticles mainly exhibited a spherical shape, with an average size of 87.5 nm, and were synthesized extracellularly. The presence of proteins as stabilizing agents of the nanoparticles was demonstrated. The extracellular biosynthesis and uptake of copper nanoparticles using dead fungal biomass is a low-cost green processes, and bioremediation of impacted local.

Intracellular biosynthesis and removal of copper nanoparticles by dead biomass of yeast isolated from the wastewater of a mine in the Brazilian Amazonia.

In this study was developed a natural process using a biological system for the biosynthesis of nanoparticles (NPs) and possible removal of copper from wastewater by dead biomass of the yeast Rhodotorula mucilaginosa. Dead and live biomass of Rhodotorula mucilaginosa was used to analyze the equilibrium and kinetics of copper biosorption by the yeast in function of the initial metal concentration, contact time, pH, temperature, agitation and inoculum volume. Dead biomass exhibited the highest biosorption capacity of copper, 26.2 mg g(-1), which was achieved within 60 min of contact, at pH 5.0, temperature of 30°C, and agitation speed of 150 rpm. The equilibrium data were best described by the Langmuir isotherm and Kinetic analysis indicated a pseudo-second-order model. The average size, morphology and location of NPs biosynthesized by the yeast were determined by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and transmission electron microscopy (TEM). The shape of the intracellularly synthesized NPs was mainly spherical, with an average size of 10.5 nm. The X-ray photoelectron spectroscopy (XPS) analysis of the copper NPs confirmed the formation of metallic copper. The dead biomass of Rhodotorula mucilaginosa may be considered an efficiently bioprocess, being fast and low-cost to production of copper nanoparticles and also a probably nano-adsorbent of this metal ion in wastewater in bioremediation process.

Biosynthesis and uptake of copper nanoparticles by dead biomass of Hypocrea lixii isolated from the metal mine in the Brazilian Amazon Region.

A biological system for the biosynthesis of nanoparticles (NPs) and uptake of copper from wastewater, using dead biomass of Hypocrea lixii was analyzed and described for the first time. The equilibrium and kinetics investigation of the biosorption of copper onto dead, dried and live biomass of fungus were performed as a function of initial metal concentration, pH, temperature, agitation and inoculum volume. The high biosorption capacity was observed for dead biomass, completed within 60 min of contact, at pH 5.0, temperature of 40 °C and agitation speed of 150 rpm with a maximum copper biosorption of 19.0 mg g(-1). The equilibrium data were better described using the Langmuir isotherm and kinetic analysis indicated that copper biosorption follows a pseudo-second-order model. The average size, morphology and location of NPs biosynthesized by the fungus were determined by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and transmission electron microscopy (TEM). NPs were mainly spherical, with an average size of 24.5 nm, and were synthesized extracellularly. The X-ray diffraction (XRD) analysis confirms the presence of metallic copper particles. Infrared spectroscopy (FTIR) study revealed that the amide groups interact with the particles, which was accountable for the stability of NPs. This method further confirmed the presence of proteins as stabilizing and capping agents surrounding the copper NPs. These studies demonstrate that dead biomass of Hypocrea lixii provides an economic and technically feasible option for bioremediation of wastewater and is a potential candidate for industrial-scale production of copper NPs.