ABSTRACT
This paper examines the possibility of using basalt-based glass ceramics for construction of structural parts of equipment in metallurgy and mining. An ultrasonic vibration method with a stationary sample pursuant to the ASTM G32 standard was used to evaluate the possibility of the glass ceramic samples application in such operating conditions. As the starting material for synthesis of samples, olivine-pyroxene basalt from the locality Vrelo-Kopaonik Mountain (Serbia) was used. In order to obtain pre-determined structure and properties of basalt-based glass ceramics, raw material preparation methods through the sample crushing, grinding, and mechanical activation processes have been examined together with sample synthesis by means of melting, casting, and thermal treatment applied for the samples concerned. The mass loss of samples in function of the cavitation time was monitored. Sample surface degradation level was quantified using the image analysis. During the test, changes in sample morphology were monitored by means of the scanning electronic microscopy method. The results showed that basalt-based glass ceramics are highly resistant to cavitation wear and can be used in similar exploitation conditions as a substitute for other metal materials.
ABSTRACT
The literature was reviewed with respect to deinking flotation methods with toner samples, specifically emphasizing the speciation of copy machine and laser printing, which produce an increasing quantity of paper that is difficult to recycle. Speciation here refers to the physical-chemical characteristics of the toner, which change because of the polymerization (fusion) and oxidation process, due to exposure to heat, light and oxygen (air) during the printing process. To simulate the deinking flotation, after the ideal disintegration process, samples of toner were prepared in order to provide free toner particles. Synthetic toner has iron content and the same physical-chemical features as free disintegrated printed toner particles.We report the toner (I) and fibre (Y) recovery and the brightness (B) of laboratory filter pads formed of deinked product as deinking efficiencies. The application of oleic acid as the collector in the flotation stage gives a better flotation recovery in alkaline than in acidic conditions. The highest brightness (BF = 93.66%) and flotation recoveries (I = 90, Y = 92.82%) were achieved during testing at an oleic acid concentration of 3.38·10(-6) mol l(-1), which is the lowest dose used. This makes the use of oleic acid economical and environmentally friendly.
