Towards globally relevant, small-footprint dewatering solutions: Optimal conditioner dose for highly variable blackwater from non-sewered sanitation.

Globally, the sanitation needs of three billion people are met by non-sewered sanitation. Small-footprint treatment technologies are needed that are appropriate for dense urban areas. Blackwater (BW) (or fecal sludge), contains more than 95% liquid, and dewatering it without conditioning requires large footprints. Chemically-enhanced dewatering with conditioners is a promising option to increase dewatering performance and reduce required footprints. However, before implementation of this solution there is a need for increased knowledge on selection and dosing of conditioners. This study evaluated bio-based and synthetic conditioners (chitosan, tannin-, and starch-based, synthetic with and without poly-acrylamide) with 14 types of BW from five countries. The supernatant after settling with jar-tests was analyzed to quantify optimal dose and dewatering performance. The reduction of total chemical oxygen demand (COD) was >55%, achieved by removal of particulate constituents with mainly soluble COD remaining in the supernatant. A reduction in particulate COD could lead to increased efficiency of soluble COD in supernatant treatment. Bio-based conditioners are as effective as synthetic conditioners, and when performance was variable, it was due to differing properties of TSS, TS, EC and pH. Optimal conditioner dose for synthetic conditioners and chitosan could be predicted using concentrations of total solids (TS) (R2 > 0.7), whereas optimal dose for starch- and tannin-based conditioners could be predicted with electrical conductivity (EC) (R2 > 0.8), and colloid titration (R2 > 0.8). In addition, real-time optical TSS and EC sensors could accurately predict chitosan dose for fresh BW treated at source (R2 = 0.97, R2 = 0.95). This study validates that use of conditioners for dewatering with highly variable BW can be implemented with real-time measurements for optimal dose, in globally relevant implementations.

Predictive models using "cheap and easy" field measurements: Can they fill a gap in planning, monitoring, and implementing fecal sludge management solutions?

The characteristics of fecal sludge delivered to treatment plants are highly variable. Adapting treatment process operations accordingly is challenging due to a lack of analytical capacity for characterization and monitoring at many treatment plants. Cost-efficient and simple field measurements such as photographs and probe readings could be proxies for process control parameters that normally require laboratory analysis. To investigate this, we evaluated questionnaire data, expert assessments, and simple analytical measurements for fecal sludge collected from 421 onsite containments. This data served as inputs to models of varying complexity. Random forest and linear regression models were able to predict physical-chemical characteristics including total solids (TS) and ammonium (NH4+-N) concentrations, and solid-liquid separation performance including settling efficiency and filtration time (R2 from 0.51-0.66) based on image analysis of photographs (sludge color, supernatant color, and texture) and probe readings (conductivity (EC) and pH). Supernatant color was the best predictor of settling efficiency and filtration time, EC was the best predictor of NH4+-N, and texture was the best predictor of TS. Predictive models have the potential to be applied for real-time monitoring and process control if a database of measurements is developed and models are validated in other cities. Simple decision tree models based on the single classifier of containment type can also be used to make predictions about citywide planning, where a lower degree of accuracy is required.