ABSTRACT
This paper focuses on the operational analysis of wireless power transfer (WPT) system, while the topology of the secondary side rectifier represents the main element, for which the properties of WPT system are being investigated. Initially the system description and technical specifications are given. Because WPT systems are designed for a certain type and value of the load (impedance matching) in order to achieve the highest possible efficiency, the definitions for those values are identified for individual topologies of the secondary side rectifiers. Consequently, the results are compared and discussed and followed by the simulation analysis to prove the operational behavior in time-domain for each of investigated alternative of rectifier. Several relationships have been identified in relation to secondary side electrical variables, and discussion for stress-optimization are given as well. The simulation results are verified by the experimental measurements, while individual solutions for secondary side rectifiers are evaluated from efficiency point of view followed by the recommendations of the operational conditions.
ABSTRACT
Geothermal energy installations are becoming increasingly common in new city developments and renovations. With a broad range of technological applications and improvements in this field, the demand for suitable monitoring technologies and control processes for geothermal energy installations is also growing. This article identifies opportunities for the future development and deployment of IoT sensors applied to geothermal energy installations. The first part of the survey describes the technologies and applications of various sensor types. Sensors that monitor temperature, flow rate and other mechanical parameters are presented with a technological background and their potential applications. The second part of the article surveys Internet-of-Things (IoT), communication technology and cloud solutions applicable to geothermal energy monitoring, with a focus on IoT node designs, data transmission technologies and cloud services. Energy harvesting technologies and edge computing methods are also reviewed. The survey concludes with a discussion of research challenges and an outline of new areas of application for monitoring geothermal installations and innovating technologies to produce IoT sensor solutions.
Subject(s)
Geothermal Energy , Internet of Things , Cloud Computing , Information Technology , TechnologyABSTRACT
Magnetic field sensors installed in the road infrastructure can be used for autonomous traffic flow parametrization. Although the main goal of such a measuring system is the recognition of the class of vehicle and classification, velocity is the essential parameter for further calculation and it must be estimated with high reliability. In-field test campaigns, during actual traffic conditions, showed that commonly accepted velocity estimation methods occasionally produce highly erroneous results. For anomaly detection, we propose a criterion and two different correction algorithms. Non-linear signal rescaling and time-based segmentation algorithms are presented and compared for faulty result mitigation. The first one consists of suppressing the highly distorted signal peaks and looking for the best match with cross-correlation. The second approach relies on signals segmentation according to the feature points and multiple cross-correlation comparisons. The proposed two algorithms are evaluated with a dataset of over 300 magnetic signatures of a vehicle from unconstraint traffic conditions. Results show that the proposed criteria highlight all greatly faulty results and that the correction algorithms reduce the maximum error by twofold, but due to the increased mean error, mitigation technics shall be used explicitly with distorted signals.
ABSTRACT
Reliable cost-effective traffic monitoring stations are a key component of intelligent transportation systems (ITS). While modern surveillance camera systems provide a high amount of data, due to high installation price or invasion of drivers' personal privacy, they are not the right technology. Therefore, in this paper we introduce a traffic flow parameterization system, using a built-in pavement sensing hub of a pair of AMR (anisotropic magneto resistance) magnetic field and MEMS (micro-electromechanical system) accelerometer sensors. In comparison with inductive loops, AMR magnetic sensors are significantly cheaper, have lower installation price and cause less intrusion to the road. The developed system uses magnetic signature to estimate vehicle speed and length. While speed is obtained from the cross-correlation method, a novel vehicle length estimation algorithm based on characterization of the derivative of magnetic signature is presented. The influence of signature filtering, derivative step and threshold parameter on estimated length is investigated. Further, accelerometer sensors are employed to detect when the wheel of vehicle passes directly over the sensor, which cause distorted magnetic signatures. Results show that even distorted signatures can be used for speed estimation, but it must be treated with a more robust method. The database during the real-word traffic and hazard environmental condition was collected over a 0.5-year period and used for method validation.
Subject(s)
Automobile Driving , Algorithms , Magnetic Phenomena , Magnetics , Physical PhenomenaABSTRACT
With rapidly increasing traffic occupancy, intelligent transportation systems (ITSs) are a vital feature for urban areas. This paper analyses methods for estimating long (L > 10 m) vehicle speed and length using a self-developed system, equipped with two anisotropic magneto-resistive (AMR) sensors, and introduces a method for verifying the results. A well-known cross-correlation method of magnetic signatures is not appropriate for calculating the vehicle speed of long vehicles owing to limited resources and a long calculation time. Therefore, the adaptive signature cropping algorithm was developed and used with a difference quotient of a magnetic signature. An additional piezoelectric polyvinylidene fluoride (PVDF) sensor and video camera provide ground truth to evaluate the performances. The prototype system was installed on the urban road and tested under various traffic and weather conditions. The accuracy of results was evaluated by calculating the mean absolute percentage error (MAPE) for different methods and vehicle speed groups. The experimental result with a self-obtained data set of 600 unique entities shows that the average speed MAPE error of our proposed method is lower than 3% for vehicle speed in a range between 40 and 100 km/h.
ABSTRACT
Seeking an effective method for estimating the speed and length of a car is still a challenge for engineers and scientists who work on intelligent transportation systems. This paper focuses on a self-developed system equipped with four anisotropic magneto-resistive (AMR) sensors which are placed on a road lane. The piezoelectric polyvinylidene fluoride (PVDF) sensors are also mounted and used as a reference device. The methods applied in the research are well-known: the fixed threshold-based method and the adaptive two-extreme-peak detection method. However, the improved accuracy of estimating the length by using one of the methods, which is based on computing the difference quotient of a time-discrete signal (representing the changes in the magnitude of the magnetic field of the Earth), is observed. The obtained results, i.e., the speed and length of a vehicle, are presented for various values of the increment Δn used in numerical differentiation of magnetic field magnitude data. The results were achieved in real traffic conditions after analyzing a data set M = 290 of vehicle signatures. The accuracy was evaluated by calculating MAE (Mean Absolute Error), RMSE (Root Mean Squared Error) for different classes of vehicles. The MAE is within the range of 0.52 m-1.18 m when using the appropriate calibration factor. The results are dependent on the distance between sensors, the speed of vehicle and the signal processing method applied.
ABSTRACT
The proper operation of computing resources in a microprocessor-embedded system plays a key role in reducing computing time. Processing the variable amount of collected data in real-time improves the performance of a microprocessor-embedded system. In this regard, a vehicle’s speed measurement system is no exception. The computing time for evaluating any speed value is expected to be reduced as much as possible. Four computational methods, including cross-correlation, are discussed. An exemplary pair of recorded signals presenting the change in magnetic field magnitude is analyzed. The sample delay values are compared. The results of the evaluated speed and the execution time of the program code are presented for each method based on a dataset of 200 randomly driven vehicles. The results of the performed tests confirm that the cross-correlation-based methods are not always reliable in situations when the sample size is small, i.e., it is a segment of the impulse response caused by a driving vehicle.
ABSTRACT
This article explores a non-invasive method to determine interstitial fluid level and pressure in tissue. Interdigital electrodes were chosen by simulated results in software "Comsol multiphysis 4.3a". Environment model similar to human body was created. Measurements were carried out at different situations which can occur during preoperative and afterwards surgery. Non-invasive method decreases possibility of infection and will improve recovery process in postoperative period.
Subject(s)
Biosensing Techniques/instrumentation , Extracellular Fluid/metabolism , Fluid Therapy/instrumentation , Algorithms , Elasticity , Electric Conductivity , Electric Impedance , Electrodes , Equipment Design , Humans , Models, BiologicalABSTRACT
Methods for estimating a car's length are presented in this paper, as well as the results achieved by using a self-designed system equipped with two anisotropic magneto-resistive (AMR) sensors, which were placed on a road lane. The purpose of the research was to compare the lengths of mid-size cars, i.e., family cars (hatchbacks), saloons (sedans), station wagons and SUVs. Four methods were used in the research: a simple threshold based method, a threshold method based on moving average and standard deviation, a two-extreme-peak detection method and a method based on the amplitude and time normalization using linear extrapolation (or interpolation). The results were achieved by analyzing changes in the magnitude and in the absolute z-component of the magnetic field as well. The tests, which were performed in four different Earth directions, show differences in the values of estimated lengths. The magnitude-based results in the case when cars drove from the South to the North direction were even up to 1.2 m higher than the other results achieved using the threshold methods. Smaller differences in lengths were observed when the distances were measured between two extreme peaks in the car magnetic signatures. The results were summarized in tables and the errors of estimated lengths were presented. The maximal errors, related to real lengths, were up to 22%.
ABSTRACT
The vehicle detection process plays the key role in determining the success of intelligent transport management system solutions. The measurement of distortions of the Earth's magnetic field using magnetic field sensors served as the basis for designing a solution aimed at vehicle detection. In accordance with the results obtained from research into process modeling and experimentally testing all the relevant hypotheses an algorithm for vehicle detection using the state criteria was proposed. Aiming to evaluate all of the possibilities, as well as pros and cons of the use of anisotropic magnetoresistance (AMR) sensors in the transport flow control process, we have performed a series of experiments with various vehicles (or different series) from several car manufacturers. A comparison of 12 selected methods, based on either the process of determining the peak signal values and their concurrence in time whilst calculating the delay, or by measuring the cross-correlation of these signals, was carried out. It was established that the relative error can be minimized via the Z component cross-correlation and Kz criterion cross-correlation methods. The average relative error of vehicle speed determination in the best case did not exceed 1.5% when the distance between sensors was set to 2 m.
