ABSTRACT
Infection prevention clothing is becoming an essential protective tool in the current pandemic, especially because now we know that SARS-CoV-2 can easily infect humans in poorly ventilated indoor spaces. However, commercial infection prevention clothing is made of fabrics that are not capable of inactivating the virus. Therefore, viral infections of symptomatic and asymptomatic individuals wearing protective clothing such as masks can occur through aerosol transmission or by contact with the contaminated surfaces of the masks, which are suspected as an increasing source of highly infectious biological waste. Herein, we report an easy fabrication method of a novel antiviral non-woven fabric containing polymer filaments that were coated with solidified hand soap. This extra protective fabric is capable of inactivating enveloped viruses such as SARS-CoV-2 and phi 6 in one minute of contact. In this study, this antiviral fabric was used to fabricate an antiviral face mask and did not show any cytotoxic effect in human keratinocyte HaCaT cells. Furthermore, this antiviral non-woven fabric could be used for the fabrication of other infection prevention clothing such as caps, scrubs, shirts, trousers, disposable gowns, overalls, hoods, aprons, and shoe covers. Therefore, this low-cost technology could provide a wide range of infection protective tools to combat COVID-19 and future pandemics in developed and underdeveloped countries.
ABSTRACT
The Coronavirus Disease (COVID-19) pandemic is demanding rapid action of the authorities and scientific community in order to find new antimicrobial solutions that could inactivate the pathogen SARS-CoV-2 that causes this disease. Gram-positive bacteria contribute to severe pneumonia associated with COVID-19, and their resistance to antibiotics is increasing at an alarming rate. In this regard, non-woven fabrics are currently used for the fabrication of infection prevention clothing such as face masks, caps, scrubs, shirts, trousers, disposable gowns, overalls, hoods, aprons and shoe covers as protective tools against viral and bacterial infections. However, these non-woven fabrics are made of materials that do not possess antimicrobial activity. Thus, we have developed here non-woven fabrics with antimicrobial coatings of cranberry extracts capable of inactivating enveloped viruses such as SARS-CoV-2 and the phage phi 6, and two multidrug-resistant bacteria: the methicillin-resistant Staphylococcus aureus and Staphylococcus epidermidis. The non-toxicity of these advanced technology was ensured using a Caenorhabditis elegans in vivo model. These results open up a new prevention path using natural and biodegradable compounds for the fabrication of infection prevention clothing in the current COVID-19 and future pandemics.
ABSTRACT
COVID-19 pandemic and associated supply-chain disruptions emphasise the requirement for antimicrobial materials for on-demand manufacturing. Besides aerosol transmission, SARS-CoV-2 is also propagated through contact with virus-contaminated surfaces. As such, the development of effective biofunctional materials that can inactivate SARS-CoV-2 are critical for pandemic preparedness. Such materials will enable the rational development of antiviral devices with prolonged serviceability reducing the environmental burden of disposable alternatives. This research reveals the novel use of Laser Powder Bed Fusion (LPBF) to 3D print porous Cobalt-Chromium-Molybdenum (Co-Cr-Mo) superalloy with potent antiviral activity (100% viral inactivation in 30 mins). The porous material was rationally conceived using a multi-objective surrogate model featuring track thickness (tt) and pore diameter ({phi}d) as responses. The regression analysis found the most significant parameters for Co-Cr-Mo track formation to be the interaction effects of scanning rate (Vs) and laser power (Pl) in the order PlVs > Vs > Pl. Contrastively, the pore diameter was found to be primarily driven by the hatch spacing (Sh). The study is the first to demonstrate the superior antiviral properties of 3D printed Co-Cr-Mo superalloy against an enveloped virus used as biosafe viral model of SARS-CoV-2. The material significantly outperforms the viral inactivation time of other broadly used antiviral metals such as copper and silver from 5 hours to 30 minutes. As such the study goes beyond the current state-of-the-art in antiviral alloys to provide extra-protection to combat the SARS-COV-2 viral spread. The evolving nature of the COVID-19 pandemic brings new and unpredictable challenges where on-demand 3D printing of antiviral materials can achieve rapid solutions while reducing the environmental impact of disposable devices. Graphical abstract O_FIG O_LINKSMALLFIG WIDTH=200 HEIGHT=148 SRC="FIGDIR/small/454385v1_ufig1.gif" ALT="Figure 1"> View larger version (47K): org.highwire.dtl.DTLVardef@992f2forg.highwire.dtl.DTLVardef@e8dbe5org.highwire.dtl.DTLVardef@1bcb8adorg.highwire.dtl.DTLVardef@100a345_HPS_FORMAT_FIGEXP M_FIG C_FIG
ABSTRACT
Open reading frame 8 (ORF8) protein is one of the most evolving accessory proteins in severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the causative agent of coronavirus disease 2019 (COVID-19). It was previously reported that the ORF8 protein inhibits presentation of viral antigens by the major histocompatibility complex class I (MHC-I) and interacts with host factors involved in pulmonary inflammation. The ORF8 protein assists SARS-CoV-2 to evade immunity and replication. Among many contributing mutations, Q27STOP, a mutation in the ORF8 protein defines the B.1.1.7 lineage of SARS-CoV-2, which is engendering the second wave of COVID-19. In the present study, 47 unique truncated ORF8 proteins (T-ORF8) due to the Q27STOP mutations were identified among 49055 available B.1.1.7 SARS-CoV-2 sequences. The results show that only one of the 47 T-ORF8 variants spread to over 57 geo-locations in North America, and other continents which includes Africa, Asia, Europe and South America. Based on various quantitative features such as amino acid homology, polar/non-polar sequence homology, Shannon entropy conservation, and other physicochemical properties of all specific 47 T-ORF8 protein variants, a collection of nine possible T-ORF8 unique variants were defined. The question of whether T-ORF8 variants work similarly to ORF8 has yet to be investigated. A positive response to the question could exacerbate future COVID-19 waves, necessitating severe containment measures.
ABSTRACT
Spike (S) proteins of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) are critical determinants of the infectivity and antigenicity of the virus. Several mutations in the spike protein of SARS-CoV-2 have already been detected, and their effect in immune system evasion and enhanced transmission as a cause of increased morbidity and mortality are being investigated. From pathogenic and epidemiological perspectives, spike proteins are of prime interest to researchers. This study focused on the unique variants of S proteins from six continents Asia, Africa, Europe, Oceania, South America, and North America. In comparison to the other five continents, Africa (29.065%) had the highest percentage of unique S proteins. Notably, only North America had 87% (14046) of the total (16143) specific S proteins available in the NCBI database(across all continents). Based on the amino acid frequency distributions in the S protein variants from all the continents, the phylogenetic relationship implies that unique S proteins from North America were significantly different from those of the other five continents. Overtime, the unique variants originating from North America are most likely to spread to the other geographic locations through international travel or naturally by emerging mutations. Hence it is suggested that restriction of international travel should be considered, and massive vaccination as an utmost measure to combat the spread of COVID-19 pandemic. It is also further suggested that the efficacy of existing vaccines and future vaccine development must be reviewed with careful scrutiny, and if needed, further re-engineered based on requirements dictated by new emerging S protein variants.
ABSTRACT
Face masks have globally been accepted to be an effective protective tool to prevent bacterial and viral transmission, especially against indoor aerosol transmission. However, commercial face masks contain filters that are made of materials that are not capable of inactivating neither SARS-CoV-2 nor multidrug-resistant bacteria. Therefore, symptomatic and asymptomatic individuals can infect other people even if they wear them because some viable viral or bacterial loads can escape from the masks. Furthermore, viral or bacterial contact transmission can occur after touching the mask, which constitutes an increasing source of contaminated biological waste. Additionally, bacterial pathogens contribute to the SARS-CoV-2 mediated pneumonia disease complex and their resistance to antibiotics in pneumonia treatment is increasing at an alarming rate. In this regard, herein, we report the development of a novel protective non-woven face mask filter fabricated with a biofunctional coating of benzalkonium chloride that is capable of inactivating SARS-CoV-2 in one minute of contact, and the life-threatening methicillin-resistant Staphylococcus aureus and Staphylococcus epidermidis. Nonetheless, despite the results obtained, further studies are needed to ensure the safety and correct use of this technology for the mass production and commercialization of this broad-spectrum antimicrobial face mask filter. Our novel protective non-woven face mask filter would be useful for many health care workers and researchers working in this urgent and challenging field.
ABSTRACT
The coronavirus disease 2019 (COVID-19) is caused by the Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) which is pandemic with an estimated fatality rate less than 1% is ongoing. SARS-CoV-2 accessory proteins ORF3a, ORF6, ORF7a, ORF7b, ORF8, and ORF10 with putative functions to manipulate host immune mechanisms such as interferons, immune signaling receptor NLRP3 (NOD-, LRR-, and pyrin domain-containing 3) inflammasome, inflammatory cytokines such as interleukin 1{beta} (IL-1{beta}) are critical in COVID-19 pathology. Outspread variations of each of the six accessory proteins of all complete proteomes (available as of October 26, 2020, in the National Center for Biotechnology Information depository) of SARS-CoV-2, were observed across six continents. Across all continents, the decreasing order of percentage of unique variations in the accessory proteins was found to be ORF3a>ORF8>ORF7a>ORF6>ORF10>ORF7b. The highest and lowest unique variations of ORF3a were observed in South America and Oceania, respectively. This finding suggests that the wide variations of accessory proteins seem to govern the pathogenicity of SARS-CoV-2, and consequently, certain propositions and recommendations can be made in the public interest.
ABSTRACT
Angiotensin-converting enzyme 2 (ACE2) is the cellular receptor for the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) that is engendering the severe coronavirus disease 2019 (COVID-19) pandemic. The spike (S) protein receptor-binding domain (RBD) of SARS-CoV-2 binds to the three sub-domains viz. amino acids (aa) 22-42, aa 79-84, and aa 330-393 of ACE2 on human cells to initiate entry. It was reported earlier that the receptor utilization capacity of ACE2 proteins from different species, such as cats, chimpanzees, dogs, and cattle, are different. A comprehensive analysis of ACE2 receptors of nineteen species was carried out in this study, and the findings propose a possible SARS-CoV-2 transmission flow across these nineteen species.
ABSTRACT
The COVID-19 outbreak has escalated into the worse pandemic of the present century. The fast spread of the new SARS-CoV-2 coronavirus has caused devastating health and economic crises all over the world, with Spain being one of the worst affected countries in terms of confirmed COVID-19 cases and deaths per inhabitant. In this situation, the Spanish Government declared the lockdown of the country. The variations of air pollution in terms of fine particulate matter (PM2.5) levels in seven cities of Spain are analyzed here considering the effect of meteorology during the national lockdown. The possible associations of PM2.5 pollution and climate with COVID-19 accumulated cases were also analyzed. While the epidemic curve was flattened, the results of the analysis show that the 4-week Spanish lockdown significantly reduced the PM2.5 levels in only one of the cities despite the drastically reduced human activity in good agreement with our previous study of changes in air quality in terms of CO, SO2, PM10, O3 and NO2 levels. Furthermore, no associations between either PM2.5 exposure or environmental conditions and COVID-19 transmission were found during the early spread of the pandemic.
