Improvements in bones and stones consolidating processes by vacuum system method.

The degradation of materials commonly starts on the surface of the object and proceeds towards inside through pores, increasing fractures and lesions. To restore mechanical and aesthetic characteristics, it is necessary by the application of consolidants to fill these weak points so that they become inaccessible to corrosive agents. Greater is the amount of consolidant that penetrates, greater the efficiency of the restoration. This is the limiting factor of many approaches which due to very tight pores result not fully successful. The consolidation under vacuum can help to pass these difficulties. So we have adopted it to restore Macco samples and tested to consolidate archaeological bones. The samples were consolidated by complete immersion under vacuum (-700 mm Hg), in a consolidant solution containing 8% w/V of diammonium phosphate. The success of the application to both the kind of samples is shown by microscope images, SEM-EDAX analysis, and weight variation.

Direct Catalytic Fuel Cell Device Coupled to Chemometric Methods to Detect Organic Compounds of Pharmaceutical and Biomedical Interest.

Making use of a small direct methanol fuel cell device (DMFC), used as an analytical sensor, chemometric methods, organic compounds very different from one another, can be determined qualitatively and quantitatively. In this research, the following seven different organic compounds of pharmaceutical and biomedical interest, having in common only one -OH group, were considered: chloramphenicol, imipenem, methanol, ethanol, propanol, atropine and cortisone. From a quantitative point of view, the traditional approach, involving the building of individual calibration curves, which allow the quantitative determination of the corresponding organic compounds, even if with different sensitivities, was followed. For the qualitative analysis of each compound, this approach has been much more innovative. In fact, by processing the data from each of the individual response curves, obtained through the fuel cell, using chemometric methods, it is possible to directly identify and recognize each of the seven organic compounds. Since the study is a proof of concept to show the potential of this innovative methodological approach, based on the combination of direct methanol fuel cell with advanced chemometric tools, at this stage, concentration ranges that may not be the ones found in some real situations were investigated. The three methods adopted are all explorative methods with very limited computation costs, which have different characteristics and, therefore, may provide complementary information on the analyzed data. Indeed, while PCA (principal components analysis) provides the most parsimonious summary of the variability observed in the current response matrix, the analysis of the current response behavior was performed by the "slicing" method, in order to transform the current response profiles into numerical matrices, while PARAFAC (Parallel Factor Analysis) allows to obtain a finer deconvolution of the exponential curves. On the other hand, the multiblock nature of "ComDim" (Common Components and Specific Weight Analysis) has been the basis to relate the variability observed in the current response behavior with the parameters of the linear calibrations.

Direct Methanol (or Ethanol) Fuel Cell as Enzymatic or Non-Enzymatic Device, Used to Check Ethanol in Several Pharmaceutical and Forensic Samples.

It was already demonstrated by our research group that a direct catalytic methanol (or ethanol) fuel cell (DMFC) device can be used also for analytical purposes, such as the determination of ethanol content in beverages. In the present research we extended the application to the analysis of several ethanol-based pharmaceutical products, i.e., pharmaceutical tinctures (dyes) and disinfectants. In recent work we have also shown that the use of alcohol dehydrogenase enzyme as a component of the anodic section of a direct catalytic methanol (or ethanol) fuel cell significantly improves the performance of a simple DMFC device, making it more suitable to measure ethanol (or methanol) in real samples by this cell. At the same time, we have also shown that DMFC can respond to certain organic compounds that are more complex than methanol and ethanol and having R(R')CH-OH group in the molecule. Firstly, pharmaceutical dyes were analyzed for their ethanol content using the simple catalytic DMFC device, with good accuracy and precision. The results are illustrated in the present paper. Additionally, a detailed investigation carried out on commercial denatured alcoholic samples evidenced several interferences due to the contained additives. Secondly, we hypothesized that by using the enzymatic fuel cell it would be possible to improve the determination, for instance, of certain antibiotics, such as imipenem, or else carry out determinations of ethanol content in saliva and serum (simulating forensic tests, correlated to drivers "breath test"); even if this has already been hypothesized in previous papers, the present study is the first to perform them experimentally, obtaining satisfactory results. In practice, all of the goals which we proposed were reached, confirming the remarkable opportunities of the enzymatic (or non-enzymatic) DMFC device.

Ethanol traces in natural waters checked using a new DMFC enzymatic device.

The use of fuels with strong percentage of ethanol that is done in countries such as Brazil and Australia causes a more and more relevant presence of traces of ethanol in natural waters. The ethanol present in these fuels seems to contribute to increase, through various mechanisms, the concentration of hydrocarbons in the same waters and soil. The ethanol content in natural waters must therefore be monitored frequently. It was therefore proposed a very simple innovative method, based on a catalytic fuel cell with the alcohol dehydrogenase enzyme immobilized in the anodic compartment of the device. The analytical performances of this new device were then evaluated by checking traces of alcohol in different types of natural waters (rain, river, and groundwater), with a good degree of precision and with an acceptable level of accuracy.

Further development on DMFC device used for analytical purpose: real applications in the pharmaceutical field and possible in biological fluids.

The analytical research devoted to the utilization of the direct methanol fuel cell (DMFC) for analytical purposes has been continued. The research reported in this paper concerns two points, one of which was the possibility of improving the features, from the analytical point of view, of a catalytic fuel cell for methanol and ethanol, by introducing an enzyme, immobilized into a dialysis membrane small bag, in the anodic area of the fuel cell. This objective has been fully achieved, particularly using the enzyme alcohol dehydrogenase, which has increased the sensitivity of the method and reduced dramatically the response time of the cell. The second point concerned the opportunity to determine two particular antibiotics having an alcohol functional group in their molecule, that is, imipenem and chloramphenicol. Also, this goal has been reached, even if the sensitivity of the method is not so high. Graphical abstract Imipenem and Chloramphenicol determination using the DMFC and Ethanol determination using the enzymatic DMFC.

Bioethanol in Biofuels Checked by an Amperometric Organic Phase Enzyme Electrode (OPEE) Working in "Substrate Antagonism" Format.

The bioethanol content of two samples of biofuels was determined directly, after simple dilution in decane, by means of an amperometric catalase enzyme biosensor working in the organic phase, based on substrate antagonisms format. The results were good from the point of view of accuracy, and satisfactory for what concerns the recovery test by the standard addition method. Limit of detection (LOD) was on the order of 2.5 × 10(-5) M.

Amperometric enzyme sensor to check the total antioxidant capacity of several mixed berries. Comparison with two other spectrophotometric and fluorimetric methods.

The aim of this research was to test the correctness of response of a superoxide dismutase amperometric biosensor used for the purpose of measuring and ranking the total antioxidant capacity of several systematically analysed mixed berries. Several methods are described in the literature for determining antioxidant capacity, each culminating in the construction of an antioxidant capacity scale and each using its own unit of measurement. It was therefore endeavoured to correlate and compare the results obtained using the present amperometric biosensor method with those resulting from two other different methods for determining the total antioxidant capacity selected from among those more frequently cited in the literature. The purpose was to establish a methodological approach consisting in the simultaneous application of different methods that it would be possible to use to obtain an accurate estimation of the total antioxidant capacity of different mixed berries and the food products containing them. Testing was therefore extended to also cover jams, yoghurts and juices containing mixed berries.