Single molecule DNA sequencing in submicrometer channels: state of the art and future prospects.

We demonstrate a new method for single molecule DNA sequencing which is based upon detection and identification of single fluorescently labeled mononucleotide molecules degraded from DNA-strands in a cone shaped microcapillary with an inner diameter of 0.5 microm. The DNA was attached at an optical fiber via streptavidin/biotin binding and placed approximately 50 microm in front of the detection area inside of the microcapillary. The 5'-biotinylated 218-mer model DNA sequence used in the experiments contained 6 fluorescently labeled cytosine and uridine residues, respectively, at well defined positions. The negatively charged mononucleotide molecules were released by addition of exonuclease I and moved towards the detection area by electrokinetic forces. Adsorption of mononucleotide molecules onto the capillary walls as well as the electroosmotic (EOF) flow was prevented by the use of a 3% polyvinyl pyrrolidone (PVP) matrix containing 0.1% Tween 20. For efficient excitation of the labeled mononucleotide molecules a short-pulse diode laser emitting at 638 nm with a repetition rate of 57 MHz was applied. We report on experiments where single-stranded model DNA molecules each containing 6 fluorescently labeled dCTP and dUTP residues were attached at the tip of a fiber, transferred into the microcapillary and degraded by addition of exonuclease I solution. In one experiment, the exonucleolytic cleavage of 5-6 model DNA molecules was observed. 86 photon bursts were detected (43 Cy5-dCMP and 43 MR121-dUMP) during 400 s and identified due to the characteristic fluorescence decay time of the labels of 1.43+/-0.19 ns (Cy5-dCMP), and 2.35+/-0.29 ns (MR121-dUMP). The cleavage rate of exonuclease I on single-stranded labeled DNA molecules was determined to 3-24 Hz under the applied experimental conditions. In addition, the observed burst count rate (signals/s) indicates nonprocessive behavior of exonuclease I on single-stranded labeled DNA.

Fluorescently labeled model DNA sequences for exonucleolytic sequencing.

We describe here the enzyme-catalyzed, low-density labeling of DNAs with fluorescent dyes. Firstly, for "natural" template DNAs, dNTPs were partially substituted in the labeling reactions by the respective fluorophore-bearing analogs. The DNAs were labeled by PCR using Taq DNA polymerase. The covalent incorporation of dye-dNTPs decreased in the following order: rhodamine-green-5-dUTP (Molecular Probes, the Netherlands), tetramethylrhodamine-4-dUTP (FluoroRed, Amersham Pharmacia Biotech), Cy5-dCTP (Amersham Pharmacia Biotech). Exonucleolytic degradation by the 3'-->5' exonuclease activity of T7 DNA polymerase (wild type) in the presence of excess reduced thioredoxin proceeded to complete breakdown of the labeled DNAs. The catalytic cleavage constants determined by fluorescence correlation spectroscopy were between 0.5 and 1.5 s(-1) at 16 degrees C, normalized for the covalently incorporated dye-nucleotides. Secondly, rhodamine-green-X-dUTP (Roche Diagnostics), tetramethylrhodamine-6-dUTP (Roche Diagnostics), and Cy5-dCTP were covalently incorporated into the antisense strand of "synthetic" 218-b DNA template constructs (master sequences) at well defined positions, starting from the primer binding site, by total substitution for the naturally occurring dNTPs. The 218-b DNA constructs were labeled by PCR with a thermostable 3'-->5' exonuclease deficient mutant of the Tgo DNA polymerase which we have selected. The advantage of the special, synthetic DNA constructs as compared to natural DNAs lies in the possibility of obtaining tailor-made nucleic acids, optimized for testing the performance of exonucleolytic sequencing. The number of incorporated fluorescent nucleotides determined by complete exonucleolytic degradation and fluorescence correlation spectroscopy were six out of six possible incorporations for rhodamine-green-X-dUTP and tetramethylrhodamine-6-dUTP, respectively. Their covalent and base-specific incorporations were confirmed by the novel analysis methodology of re-sequencing (i.e. mobility-shift gel electrophoresis, reversion-PCR and re-sequencing) first developed in the paper Földes-Papp et al. (2001) and in this paper. This methodology was then used by other groups within the whole sequencing project.

Fluorescent high-density labeling of DNA: error-free substitution for a normal nucleotide.

The enzymatic incorporation of deoxyribonucleoside triphosphates by a thermostable, 3'-->5' exonuclease deficient mutant of the Tgo DNA polymerase was studied for PCR-based high-density labeling of 217-bp "natural" DNA in which fluorescent-dUTP was substituted completely for the normal dTTP. The amplified DNA carried two different sorts of tethered dye molecules. The rhodamine-green was used for internal tagging of the DNA. Since high-density incorporation of rhodamine-green-X-dUTP led to a substantial reduction (quenching) of the rhodamine-green fluorescence, a second "high" quantum yield label, Cy5, was inserted via a 5'-tagged primer in order to identify the two-color product. A theoretical concept of fluorescence auto- and cross-correlation spectroscopy developed here was applied to quantify the DNA sequence formed in terms of both the number of two-color fluorescent molecules and the number of covalently incorporated rhodamine-green-X-dUMP residues. The novel approach allowed to separate optically the specific DNA product. After complete, exonucleolytic degradation of the two-color DNA we determined 82-88 fluorescent U* labels incorporated covalently out of 92 maximum possible U* incorporations. The heavily green-labeled DNA was then isolated by preparative mobility-shift electrophoresis, re-amplified in a subsequent PCR with normal deoxyribonucleoside triphosphates, and re-sequenced. By means of this novel methodology for analyzing base-specific incorporations that was first developed here, we found that all fluorescent nucleotides and the normal nucleotides were incorporated at the correct positions. The determined labeling efficiency of 0.89-0.96 indicated that a fraction of the substrate analog was not bearing the fluorophore. The results were used to guide developments in single-molecule DNA sequencing. The labeling strategy (principal approach) for PCR-based high-density tagging of DNA, which included an appropriate thermostable DNA polymerase and a suitable fluorescent dye-dNTP, was developed here.

Towards a general procedure for sequencing single DNA molecules.

In this paper we report on the latest technical advances towards single molecule sequencing, a useful method currently developed especially for fast and easy de novo sequencing. Different approaches for complete labeling of DNA with fluorescent dyes are described. In addition, the experimental set-up for the sequencing process is shown. We demonstrate the ability to purify the buffer and enzyme solutions. Inorganic buffers were purified down to at least 20 fM of remaining fluorescent impurities. The exonuclease buffer solution could be cleaned down to 0.8 pM whereby its full activity was kept. Finally, we show a selection procedure for beads and present the data of a model experiment, in which immobilized DNA is degraded by an exonuclease within a polymethylmethacrylate (PMMA) microstructure. Furthermore, the mathematical processing of the obtained raw data is described. A first complete experimental cycle is shown, combining all preparatory steps which are necessary for single molecule sequencing in microstructures.

Progress towards single-molecule sequencing: enzymatic synthesis of nucleotide-specifically labeled DNA.

The enzymatic incorporation of modified dNTPs into a growing DNA strand has intensively been studied. Modifications were detectable reporter groups such as digoxigenin or biotin, fluorochromes or aliphatic side chains covalently attached to the base. Incorporation efficiencies were determined with several DNA polymerases using linear primer-extension reactions followed by denaturing PAGE as a high-resolution detection system. We describe the enzymatic synthesis of DNA consisting of modified nucleotides exclusively. A defined template-primer system allows us to trace incorporation: (1) in up to 18 neighboring positions for several dUTP-derivatives; or (2) in stretches of DNA of up to 40 bases in length with complete substitution of all four natural dNTPs by differently modified counterparts. Synthesized DNA molecules are shown to particularly exhibit dramatically altered physico-chemical properties by contrast with native DNA. These results provide a fundamental data set for probe generation in single-molecule DNA sequencing (SMS).

Crystal structure of a thermostable type B DNA polymerase from Thermococcus gorgonarius.

Most known archaeal DNA polymerases belong to the type B family, which also includes the DNA replication polymerases of eukaryotes, but maintain high fidelity at extreme conditions. We describe here the 2.5 A resolution crystal structure of a DNA polymerase from the Archaea Thermococcus gorgonarius and identify structural features of the fold and the active site that are likely responsible for its thermostable function. Comparison with the mesophilic B type DNA polymerase gp43 of the bacteriophage RB69 highlights thermophilic adaptations, which include the presence of two disulfide bonds and an enhanced electrostatic complementarity at the DNA-protein interface. In contrast to gp43, several loops in the exonuclease and thumb domains are more closely packed; this apparently blocks primer binding to the exonuclease active site. A physiological role of this "closed" conformation is unknown but may represent a polymerase mode, in contrast to an editing mode with an open exonuclease site. This archaeal B DNA polymerase structure provides a starting point for structure-based design of polymerases or ligands with applications in biotechnology and the development of antiviral or anticancer agents.

Large complexes of beta-poly(L-malate) with DNA polymerase alpha, histones, and other proteins in nuclei of growing plasmodia of Physarum polycephalum.

Of the various cell types in the life cycle of Physarum polycephalum, only the growing plasmodium contains the unusual polyester beta-poly(L-malate). The nuclei exhibit large complexes of this polymer with nuclear proteins, among them DNA polymerase alpha, histones, and HMG-like proteins. The complexes are indicated by the results of size exclusion chromatography and chemical cross-linking with 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide hydrochloride (EDC). After hydroxylaminolysis of the cross-linked polyester, the proteins are liberated and visualized on Western blots. The complexes of 1200-1400 kDa molecular mass exceed by far the size of free beta-poly(L-malate) and proteins. The observed variation in mass appears to be mainly a function of the kind and stoichiometry of the protein constituents and may explain the relatively high molecular mass in S phase and the low molecular mass during G2 phase of the mitotic cycle. The complexes are considerably stable at moderate ionic strength (100 mM KCl). Also, endogenous beta-poly(L-malate) does not exchange with added beta-[14C]poly(L-malate) during the lysis of the nuclei and the sample preparation. The complexes are dissociated at elevated concentrations of KCl, in the presence of spermine hydrochloride, or by treatment with DEAE/cellulose. Available evidence indicates that beta-poly(L-malate) may be involved in the maintenance of the plasmodial state of P. polycephalum.

DNA polymerase delta of Physarum polycephalum.

DNA polymerase delta from the phylogenetically ancient slime mold Physarum polycephalum has been 380-fold enriched from amoebae. It was found to have the properties typical for this type of DNA polymerase from higher eukaryotes with regard to effectors, template-primer acceptance, co-purification with 3'-5'-exonuclease activity, as well as the effect of endogenous proliferating cell nuclear antigen (PCNA) from amoebae on the stimulation and processivity of DNA synthesis. An identified cDNA fragment shows 65.5% identical amino acides with DNA polymerase delta from Saccharomyces pombe. The molecular mass of the polymerase is 125 kDa while that of PCNA is 35 kDa. During size-exclusion chromatography, the highly purified polymerase eluted in the position of 125 kDa, suggesting that no other proteins were tightly complexed with the enzyme. The DNA polymerases from the (mononucleate) amoebae and from the (multinucleate) plasmodia of P. polycephalum have very similar properties in contrast to their differences in phenotype and their mode of nuclear division. The polymerase shows a higher degree of similarity than DNA polymerase alpha, and especially the beta-like DNA polymerase, with the corresponding polymerases of higher eukaryotes. According to antibody staining, DNA polymerase delta is readily fragmented by proteases, even in the presence of inhibitor cocktails. Including freshly prepared cell lysates, proteolytic fragments are reproducible, the most abundant being 50 kDa in size. The DNA polymerase is recognized by the antisera against two peptides which have been derived by PCR-screening of plasmodial cDNA. One of the proteolytic splitting sites is located within an eight amino-acid stretch between the two antigenic sequences.

DNA polymerase alpha--primase complex of Physarum polycephalum.

DNA polymerase alpha and DNA polymerase alpha--primase complex of Physarum polycephalum were purified by rapid methods, and antibodies were raised against the complex. In crude extracts, immune-reactive polypeptides of 220 kDa, 180 kDa, 150 kDa, 140 kDa, 110 kDa, 86 kDa, 57 kDa and 52 kDa were identified. The structural relationships between the 220 kDa, 110 kDa and 140 kDa (the most abundant form) was investigated by peptide mapping. The 140 kDa form was active DNA polymerase alpha. The 57 kDa and the 52 kDa polypeptides were identified as primase subunits by auto-catalytic labelling. In amoebae, the immune-reactive 140 kDa polypeptide was replaced by a 135 kDa active DNA polymerase alpha.

Specific inhibition of Physarum polycephalum DNA-polymerase-alpha-primase by poly(L-malate) and related polyanions.

Poly(L-malate) is an unusual polyanion found in nuclei of plasmodia of Physarum polycephalum. We have investigated, by enzymatic and fluorimetric methods, whether poly(L-malate) and structurally related polyanions can interact with DNA-polymerase-alpha-primase complex and with histones of P. polycephalum. Poly(L-malate) is found to inhibit the activities of the DNA-polymerase-alpha-primase complex and to bind to histones. The mode of inhibition is competitive with regard to DNA in elongation and noncompetitive in the priming of DNA synthesis. Spermidine, spermine, and histones from P. polycephalum and from calf thymus bind to poly(L-malate) and antagonize the inhibition. The polyanions poly(vinyl sulfate), poly(acrylate), poly(L-malate), poly(D,L-malate), poly(L-aspartate), poly(L-glutamate) have been examined for their potency to inhibit the DNA polymerase. The degree of inhibition is found to depend on the distance between neighboring charges, given by the number of atoms (N) interspaced between them. Poly(L-malate) (N = 5) and poly(D,L-malate) (N = 5) are the most efficient inhibitors, followed by poly(L-aspartate) (N = 6), poly(acrylate) (N = 3), poly(L-glutamate) (N = 8), poly(vinyl sulfate) (N = 3). It is proposed that poly(L-malate) interacts with DNA-polymerase-alpha-primase of P. polycephalum. According to its physical and biochemical properties, poly(L-malate) may alternatively function as a molecular chaperone in nucleosome assembly in the S phase and as both an inhibitor and a stock-piling agent of DNA-polymerase-alpha-primase in the G2 phase and M phase of the plasmodial cell cycle.