Space charge-limited current transport in thin films of alkyl-functionalized silicon nanocrystals.

We describe the fabrication and electrical characterization of all-silicon electrode devices to study the electronic properties of thin films of silicon nanocrystals (SiNCs). Planar, highly doped Si electrodes with contact separation of 200 nm were fabricated from silicon-on-insulator substrates, by combination of electron beam lithography and reactive ion etching. The gaps between the electrodes of height 110 nm were filled with thin-films of hexyl functionalized SiNCs (diameter 3 nm) from colloidal dispersions, via a pressure-transducing PDMS (polydimethylsiloxane) membrane. This novel approach allowed the formation of homogeneous SiNC films with precise control of their thickness in the range of 15-90 nm, practically without any voids or cracks. The measured conductance of the highly resistive SiNC films at high bias voltages up to 60 V scaled approximately linearly with gap width (5-50 µm) and gap filling height, with little device-to-device variance. We attribute the observed, pronounced hysteretic current-voltage (I-V) characteristics to space-charge-limited current transport, which-after about twenty cycles-eventually blocks the current almost completely. We propose our all-silicon device scheme and gap filling methodology as a platform to investigate charge transport in novel hybrid materials at the nanoscale, in particular in the high resistivity regime.

Pathway Dependence in the Fuel-Driven Dissipative Self-Assembly of Nanoparticles.

We describe the self-assembly of gold and iron oxide nanoparticles regulated by a chemical reaction cycle that hydrolyzes a carbodiimide-based fuel. In a reaction with the chemical fuel, the nanoparticles are chemically activated to a state that favors assembling into clusters. The activated state is metastable and decays to the original precursor reversing the assembly. The dynamic interplay of activation and deactivation results in a material of which the behavior is regulated by the amount of fuel added to the system; they either did not assemble, assembled transiently, or assembled permanently in kinetically trapped clusters. Because of the irreversibility of the kinetically trapped clusters, we found that the behavior of the self-assembly was prone to hysteresis effects. The final state of the system in the energy landscape depended on the pathway of preparation. For example, when a large amount of fuel was added at once, the material would end up kinetically trapped in a local minimum. When the same amount of fuel was added in small batches with sufficient time for the system to re-equilibrate, the final state would be the global minimum. A better understanding of pathway complexity in the energy landscape is crucial for the development of fuel-driven supramolecular materials.

Dissipative Self-Assembly of Photoluminescent Silicon Nanocrystals.

Solutions of silicon nanocrystals (SiNCs) are used in a diverse range of applications because of their tunable photoluminescence, biocompatibility, and the abundance of Si. In dissipative supramolecular materials, self-assembly of molecules or nanoparticles is driven by a chemical reaction network that irreversible consumes fuel. The properties of the emerging structures are controlled by the kinetics of the underlying chemical reaction network. Herein, we demonstrate the dissipative self-assembly of photoluminescent SiNCs driven by a chemical fuel. A chemical reaction induces self-assembly of the water-soluble SiNCs. However, the assemblies are transient, and when the chemical reaction network runs out of fuel, the SiNCs disassemble. The lifetime of the assemblies is controlled by the amount of fuel added. As an application of the transient supramolecular material, we demonstrate that the platform can be used to control the delayed uptake of the nanocrystals by mammalian cells.

The influence of conjugated alkynyl(aryl) surface groups on the optical properties of silicon nanocrystals: photoluminescence through in-gap states.

Developing new methods, other than size and shape, for controlling the optoelectronic properties of semiconductor nanocrystals is a highly desired target. Here we demonstrate that the photoluminescence (PL) of silicon nanocrystals (SiNCs) can be tuned in the range 685-800 nm solely via surface functionalization with alkynyl(aryl) (phenylacetylene, 2-ethynylnaphthalene, 2-ethynyl-5-hexylthiophene) surface groups. Scanning tunneling microscopy/spectroscopy on single nanocrystals revealed the formation of new in-gap states adjacent to the conduction band edge of the functionalized SiNCs. PL red-shifts were attributed to emission through these in-gap states, which reduce the effective band gap for the electron-hole recombination process. The observed in-gap states can be associated with new interface states formed via (-Si-C≡C-) bonds in combination with conjugated molecules as indicated by ab initio calculations. In contrast to alkynyl(aryl)s, the formation of in-gap states and shifts in PL maximum of the SiNCs were not observed with aryl (phenyl, naphthalene, 2-hexylthiophene) and alkynyl (1-dodecyne) surface groups. These outcomes show that surface functionalization with alkynyl(aryl) molecules is a valuable tool to control the electronic structure and optical properties of SiNCs via tuneable interface states, which may enhance the performance of SiNCs in semiconductor devices.

The influence of surface functionalization methods on the performance of silicon nanocrystal LEDs.

The influence of silicon nanocrystal (SiNC) surface characteristics obtained from different functionalization methods on the performance of LEDs was investigated. The surface of SiNCs was functionalized with hexyl chains via hydrosilylation (HS) or with organolithium reagents (OLR) and resulting SiNCs were incorporated as the emissive layer in hybrid organic/inorganic LEDs. Devices utilizing SiNCs functionalized with OLR consistently exhibited lower turn-on voltages, higher luminances and external quantum efficiencies compared to those obtained from the HS method. These improvements were attributed to the less dense and monolayer surface coverage of the SiNCs obtained by the OLR method, as well as their higher absolute quantum yield.

Photoluminescence through in-gap states in phenylacetylene functionalized silicon nanocrystals.

Optoelectronic properties of Si nanocrystals (SiNCs) were studied by combining scanning tunneling spectroscopy (STS) and optical measurements. The photoluminescence (PL) of phenylacetylene functionalized SiNCs red shifts relative to hexyl- and phenyl-capped counterparts, whereas the absorption spectra and the band gaps extracted from STS are similar for all surface groups. However, an in-gap state near the conduction band edge was detected by STS only for the phenylacetylene terminated SiNCs, which can account for the PL shift via relaxation across this state.

Functionalization of hydride-terminated photoluminescent silicon nanocrystals with organolithium reagents.

Hydride-terminated photoluminescent silicon nanocrystals (SiNCs) were functionalized with organolithium compounds. The reaction is proposed to proceed through cleavage of Si - Si bonds and formation of a Si - Li surface species. The method yields colloidally stabilized SiNCs at room temperature with short reaction times. SiNCs with mixed surface functionalities can be prepared in an easy two-step reaction by this method by quenching of the Si - Li group with electrophiles or by addressing free Si - H groups on the surface with a hydrosilylation reaction.

Catalytic activity of copper (II) oxide prepared via ultrasound assisted Fenton-like reaction.

Copper (II) oxide nanoparticles were synthesized in an ultrasound assisted Fenton-like aqueous reaction between copper (II) cations and hydrogen peroxide. The reactions were initiated with the degradation of hydrogen peroxide by ultrasound induced cavitations at 0 °C or 5 °C and subsequent generation of the OH radical. The radical was converted into hydroxide anion in Fenton-like reactions and copper hydroxides were readily converted to oxides without the need of post annealing or aging of the samples. The products were characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and Brunauer-Emmett-Teller (BET) surface area analysis. Catalytic activity of the nanoparticles for the hydrogen peroxide assisted degradation of polycyclic aromatic hydrocarbons in the dark was tested by UV-visible spectroscopy with methylene blue as the model compound. The rate of the reaction was first order, however the rate constants changed after the initial hour. Initial rate constants as high as 0.030 min(-1) were associated with the high values of surface area, i.e. 70 m(2)/g. Annealing of the products at 150 °C under vacuum resulted in the decrease of the catalytic activity, underlying the significance of the cavitation induced surface defects in the catalytic process.