Single molecule DNA sequencing in submicrometer channels: state of the art and future prospects.

We demonstrate a new method for single molecule DNA sequencing which is based upon detection and identification of single fluorescently labeled mononucleotide molecules degraded from DNA-strands in a cone shaped microcapillary with an inner diameter of 0.5 microm. The DNA was attached at an optical fiber via streptavidin/biotin binding and placed approximately 50 microm in front of the detection area inside of the microcapillary. The 5'-biotinylated 218-mer model DNA sequence used in the experiments contained 6 fluorescently labeled cytosine and uridine residues, respectively, at well defined positions. The negatively charged mononucleotide molecules were released by addition of exonuclease I and moved towards the detection area by electrokinetic forces. Adsorption of mononucleotide molecules onto the capillary walls as well as the electroosmotic (EOF) flow was prevented by the use of a 3% polyvinyl pyrrolidone (PVP) matrix containing 0.1% Tween 20. For efficient excitation of the labeled mononucleotide molecules a short-pulse diode laser emitting at 638 nm with a repetition rate of 57 MHz was applied. We report on experiments where single-stranded model DNA molecules each containing 6 fluorescently labeled dCTP and dUTP residues were attached at the tip of a fiber, transferred into the microcapillary and degraded by addition of exonuclease I solution. In one experiment, the exonucleolytic cleavage of 5-6 model DNA molecules was observed. 86 photon bursts were detected (43 Cy5-dCMP and 43 MR121-dUMP) during 400 s and identified due to the characteristic fluorescence decay time of the labels of 1.43+/-0.19 ns (Cy5-dCMP), and 2.35+/-0.29 ns (MR121-dUMP). The cleavage rate of exonuclease I on single-stranded labeled DNA molecules was determined to 3-24 Hz under the applied experimental conditions. In addition, the observed burst count rate (signals/s) indicates nonprocessive behavior of exonuclease I on single-stranded labeled DNA.

Fluorescently labeled model DNA sequences for exonucleolytic sequencing.

We describe here the enzyme-catalyzed, low-density labeling of DNAs with fluorescent dyes. Firstly, for "natural" template DNAs, dNTPs were partially substituted in the labeling reactions by the respective fluorophore-bearing analogs. The DNAs were labeled by PCR using Taq DNA polymerase. The covalent incorporation of dye-dNTPs decreased in the following order: rhodamine-green-5-dUTP (Molecular Probes, the Netherlands), tetramethylrhodamine-4-dUTP (FluoroRed, Amersham Pharmacia Biotech), Cy5-dCTP (Amersham Pharmacia Biotech). Exonucleolytic degradation by the 3'-->5' exonuclease activity of T7 DNA polymerase (wild type) in the presence of excess reduced thioredoxin proceeded to complete breakdown of the labeled DNAs. The catalytic cleavage constants determined by fluorescence correlation spectroscopy were between 0.5 and 1.5 s(-1) at 16 degrees C, normalized for the covalently incorporated dye-nucleotides. Secondly, rhodamine-green-X-dUTP (Roche Diagnostics), tetramethylrhodamine-6-dUTP (Roche Diagnostics), and Cy5-dCTP were covalently incorporated into the antisense strand of "synthetic" 218-b DNA template constructs (master sequences) at well defined positions, starting from the primer binding site, by total substitution for the naturally occurring dNTPs. The 218-b DNA constructs were labeled by PCR with a thermostable 3'-->5' exonuclease deficient mutant of the Tgo DNA polymerase which we have selected. The advantage of the special, synthetic DNA constructs as compared to natural DNAs lies in the possibility of obtaining tailor-made nucleic acids, optimized for testing the performance of exonucleolytic sequencing. The number of incorporated fluorescent nucleotides determined by complete exonucleolytic degradation and fluorescence correlation spectroscopy were six out of six possible incorporations for rhodamine-green-X-dUTP and tetramethylrhodamine-6-dUTP, respectively. Their covalent and base-specific incorporations were confirmed by the novel analysis methodology of re-sequencing (i.e. mobility-shift gel electrophoresis, reversion-PCR and re-sequencing) first developed in the paper Földes-Papp et al. (2001) and in this paper. This methodology was then used by other groups within the whole sequencing project.

Fluorescent high-density labeling of DNA: error-free substitution for a normal nucleotide.

The enzymatic incorporation of deoxyribonucleoside triphosphates by a thermostable, 3'-->5' exonuclease deficient mutant of the Tgo DNA polymerase was studied for PCR-based high-density labeling of 217-bp "natural" DNA in which fluorescent-dUTP was substituted completely for the normal dTTP. The amplified DNA carried two different sorts of tethered dye molecules. The rhodamine-green was used for internal tagging of the DNA. Since high-density incorporation of rhodamine-green-X-dUTP led to a substantial reduction (quenching) of the rhodamine-green fluorescence, a second "high" quantum yield label, Cy5, was inserted via a 5'-tagged primer in order to identify the two-color product. A theoretical concept of fluorescence auto- and cross-correlation spectroscopy developed here was applied to quantify the DNA sequence formed in terms of both the number of two-color fluorescent molecules and the number of covalently incorporated rhodamine-green-X-dUMP residues. The novel approach allowed to separate optically the specific DNA product. After complete, exonucleolytic degradation of the two-color DNA we determined 82-88 fluorescent U* labels incorporated covalently out of 92 maximum possible U* incorporations. The heavily green-labeled DNA was then isolated by preparative mobility-shift electrophoresis, re-amplified in a subsequent PCR with normal deoxyribonucleoside triphosphates, and re-sequenced. By means of this novel methodology for analyzing base-specific incorporations that was first developed here, we found that all fluorescent nucleotides and the normal nucleotides were incorporated at the correct positions. The determined labeling efficiency of 0.89-0.96 indicated that a fraction of the substrate analog was not bearing the fluorophore. The results were used to guide developments in single-molecule DNA sequencing. The labeling strategy (principal approach) for PCR-based high-density tagging of DNA, which included an appropriate thermostable DNA polymerase and a suitable fluorescent dye-dNTP, was developed here.

Towards a general procedure for sequencing single DNA molecules.

In this paper we report on the latest technical advances towards single molecule sequencing, a useful method currently developed especially for fast and easy de novo sequencing. Different approaches for complete labeling of DNA with fluorescent dyes are described. In addition, the experimental set-up for the sequencing process is shown. We demonstrate the ability to purify the buffer and enzyme solutions. Inorganic buffers were purified down to at least 20 fM of remaining fluorescent impurities. The exonuclease buffer solution could be cleaned down to 0.8 pM whereby its full activity was kept. Finally, we show a selection procedure for beads and present the data of a model experiment, in which immobilized DNA is degraded by an exonuclease within a polymethylmethacrylate (PMMA) microstructure. Furthermore, the mathematical processing of the obtained raw data is described. A first complete experimental cycle is shown, combining all preparatory steps which are necessary for single molecule sequencing in microstructures.

Progress towards single-molecule sequencing: enzymatic synthesis of nucleotide-specifically labeled DNA.

The enzymatic incorporation of modified dNTPs into a growing DNA strand has intensively been studied. Modifications were detectable reporter groups such as digoxigenin or biotin, fluorochromes or aliphatic side chains covalently attached to the base. Incorporation efficiencies were determined with several DNA polymerases using linear primer-extension reactions followed by denaturing PAGE as a high-resolution detection system. We describe the enzymatic synthesis of DNA consisting of modified nucleotides exclusively. A defined template-primer system allows us to trace incorporation: (1) in up to 18 neighboring positions for several dUTP-derivatives; or (2) in stretches of DNA of up to 40 bases in length with complete substitution of all four natural dNTPs by differently modified counterparts. Synthesized DNA molecules are shown to particularly exhibit dramatically altered physico-chemical properties by contrast with native DNA. These results provide a fundamental data set for probe generation in single-molecule DNA sequencing (SMS).

Crystal structure of a thermostable type B DNA polymerase from Thermococcus gorgonarius.

Most known archaeal DNA polymerases belong to the type B family, which also includes the DNA replication polymerases of eukaryotes, but maintain high fidelity at extreme conditions. We describe here the 2.5 A resolution crystal structure of a DNA polymerase from the Archaea Thermococcus gorgonarius and identify structural features of the fold and the active site that are likely responsible for its thermostable function. Comparison with the mesophilic B type DNA polymerase gp43 of the bacteriophage RB69 highlights thermophilic adaptations, which include the presence of two disulfide bonds and an enhanced electrostatic complementarity at the DNA-protein interface. In contrast to gp43, several loops in the exonuclease and thumb domains are more closely packed; this apparently blocks primer binding to the exonuclease active site. A physiological role of this "closed" conformation is unknown but may represent a polymerase mode, in contrast to an editing mode with an open exonuclease site. This archaeal B DNA polymerase structure provides a starting point for structure-based design of polymerases or ligands with applications in biotechnology and the development of antiviral or anticancer agents.

The digoxigenin (DIG) system for non-radioactive labelling and detection of nucleic acids--an overview.

The use of non-radioactive nucleic acid probes has increased dramatically over the last years. The convenience of not having to deal with radioactive isotopes combined with the stability and economy of the non-radioactive systems has led to applications in various techniques. One of the most successful labelling and detection systems is based on the hapten digoxigenin. Here, the different methods for labelling nucleic acids with digoxigenin as well as the various possibilities for detection are described. Some typical applications illustrate the utility of the DIG system.

SwaI, a unique restriction endonuclease from Staphylococcus warneri, which recognizes 5'-ATTTAAAT-3'.

A novel class-II restriction endonuclease designated SwaI was purified from Staphylococcus warneri. This enzyme cleaves adenovirus 2 DNA, SV40 DNA and M13mp7 at one site each, but does not cleave lambda, PhiX174, pBR322 or pBR328 DNA. SwaI recognizes the octanucleotide sequence 5'-ATTTAAAT-3', cleaving in the center of the recognition sequence creating blunt ended DNA fragments. SwaI was used to digest chromosomal DNA from various microorganisms and human cells.

Synergistic action of glucocorticoid and estradiol responsive elements.

Modulation of gene expression by steroid hormones is mediated by receptor proteins that associate with regulatory elements of responsive genes upon binding the hormone ligand. The finding that two glucocorticoid responsive elements act cooperatively to stimulate transcription of the tyrosine aminotransferase gene prompted us to explore whether synergistic effects also occur when two different steroid hormone receptors are involved. A region of the chicken vitellogenin II gene that displays homologies to glucocorticoid and estradiol responsive elements was tested for its capability to confer estradiol and glucocorticoid inducibility to a heterologous promoter. When positioned immediately upstream of the thymidine kinase gene promoter, this element enhances expression by either steroid. Combination of both hormones results in a synergistic increase of transcription. Mutational analysis shows that sequences that show similarities of glucocorticoid and estradiol responsive elements are absolutely required for hormone induction. Analysis of the dose dependence of induction by both steroids demonstrates that half-maximal activity is observed at lower hormone concentrations when the other steroid is present in saturating amounts, which suggests that the synergistic induction observed with the combination of hormones is based on a functional interaction of the two hormone receptors.