Impact of non-thermal techniques on enzyme modifications for their applications in food.

The present review elaborates on the details of the enzyme, its structure, specificity, and the mechanism of action of selected enzymes as well as structural changes and loss or gain of activity after non-thermal treatments for food-based applications. Enzymes are biological catalysts found in various systems such as plants, animals, and microorganisms. Most of the enzymes have their optimum pH, temperature, and substrate or group of substrates. The conformational modification of enzymes either increases or decreases the rate of reaction at different pH, and temperature conditions. Enzymes are modified by different techniques to enhance the activity of enzymes for their commercial applications mainly due to the high cost of enzymes, stability, and difficulties that occur during the use of enzymes in different conditions. On the opposite, enzyme inactivation provides its application to extend the shelf life of fruits and vegetables by denaturation and partial inactivation of enzymes. Hence, the activation and inactivation of enzymes are studied by non-thermal techniques in both the model and the food system. The highly reactive species generated during non-thermal techniques cause chemical and structural modification. The enzyme modifications depend on the type and source of the enzyme, type of technique, and the parameters used.

The role of sonication in developing synbiotic Beverages: A review.

Synbiotics are a combination of probiotic cells and prebiotic components and this harmonious association has numerous health benefits. Conventional processing technologies use high temperatures for processing which reduces the viability and the final quality of synbiotic beverages. Sonication is a rapidly growing technology in the food processing sector and can be employed for the formulation of synbiotic beverages with improved functionalities. The cavitation events generated during the sonication result in beneficial effects like increased viability of probiotic cells, enhanced bifidogenic characteristics of prebiotic components, less processing time, and high-quality products. The sonication process does not affect the sensory attributes of synbiotic beverages however, it alters the structure of prebiotics thus increasing the access by the probiotics. These positive effects are solely dependent on the type of ultrasound process and the ultrasound operating parameters. The review aims to provide information on the technological aspects of ultrasound, a brief about synbiotics, details on the ultrasound process used for the formulation of synbiotics, the influence of ultrasound operating parameters, and a focus on the research gap.

Rheological and gelling properties of atmospheric pressure cold plasma treated finger millet (Eleusine coracana) starch.

Interest in exploring alternative starch sources like finger millet is rising due to wide starch applications. However, native starch often lacks desired qualities, including rheological properties. Modification is thus necessary for specific end uses. Plasma treatment as a greener and sustainable method for starch modification was therefore, studied for its ability to impact rheological properties of finger millet starch (FMS). Considerable changes in the rheological properties on FMS was noted, a significant decrease and increase (p < 0.05) in the peak viscosity (from 3.35 to 0.553 Pa.s) and paste clarity respectively was observed, indicating occurrence of depolymerization. However, intermediate plasma-treated samples (200 V) observed a decrease in paste clarity attributed to aggregate formation and cross-linking. Cross-linking was also confirmed by findings of frequency sweep where a continuous decrease in G' values of plasma treated FMS gel was interrupted by sudden increase. Despite depolymerization causing alteration of rheological behaviour such as decrease in shear thinning properties, gel strength observed a contradictory increase. This was attributed to incorporation of functional group and absence of shear responsible for network formation giving higher gel strength to FMS gels. This is elaborated in detail in the study. The study thus concluded that cold plasma significantly impacted all the rheological properties of the FMS and hence can prove to be beneficial for modification of starch rheological parameters.

Understanding the atmospheric cold plasma-induced modification of finger millet (Eleusine coracana) starch and its related mechanisms.

This research was conducted to evaluate the effects of cold plasma (CP) on finger millet starch (FMS). FMS was exposed to partially ionized gas at varying voltages (170, 200, and 230 Volt) for varied time (10, 20, and 30 mins). The impact of treatment was studied using physico-chemical, and functional properties, and the mechanisms of starch modification occurring were stated. A significant reduction in the degree of polymerization was noticed based on parameters like reducing sugar, amylose content, solubility, and molecular weight. However, in certain voltage and time combinations, crosslinking was also confirmed by analysis such as XRD, FTIR, DSC, etc. The properties of starch were altered such as remarkable increase in water solubility by 6.7 times for highest voltage and longest time (230 V/30 min) was registered. NMR data suggested valuable findings- oxidation of OH group at C6 position of starch led to formation of carbonyl group followed by carboxyl group. NMR also showed a decrease in OH protons confirming crosslinking and hence all these analyses helped to conclude findings about the quality changes using CP. It was observed that the highest voltage and considerably longer exposure time of 20 and 30 min induced significant changes in the FMS.

Partially defatted coconut flour as a functional ingredient in replacement of refined wheat flour for development of fiber rich muffins.

In the current study, partially defatted coconut flour (PDCF) was prepared using deoiled cake obtained after virgin coconut oil processing. The proximate analysis of PDCF revealed the presence of 5.21% moisture, 14.03% fat, 21.34% protein, 46.39% fiber and 3.27% ash, along with prominent functional properties. Herein, muffins were prepared by incorporation of PDCF as a replacement of refined wheat flour (RWF) at 0, 25, 50, 75 and 100% flour blend. Significant changes in batter rheology were observed after 25 to 100% replacement of RWF with PDCF, which indicated a decrease in peak viscosity and final viscosity by 65.05 to 83.59% and 61.57 to 85.17% respectively, an increase in specific gravity of batter by 0.857-0.929 g/L. The prepared muffins had significant variations in colour of crust and crumb regions as represented by changes in L*a*b*, Hue angle (h°) and Chroma (C) and textural properties such as hardness, springiness, guminess, cohesiveness, chewiness, and resilience. Incorporation of 50% PDCF significantly (P < 0.05) increased the overall acceptability of the muffins (with a maximum score of 8.5), with a fiber content of 5.53 ± 0.23% and protein content of 7.57 ± 0.30%. Storage stability studies performed at 25 ± 2 °C for seven days revealed an increase in microbial count, and reduction in textural properties but both to be in acceptable regime. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-023-05857-2.

Effect of pin-to-plate atmospheric cold plasma (ACP) on microbial load and physicochemical properties in cinnamon, black pepper, and fennel.

The current study aimed to investigate the influence of pin-to-plate atmospheric cold plasma treatment (ACP) on the microbial decontamination efficacy, physical (water activity, color, texture), and bioactive (total phenolic and anti-oxidant capacity, volatile oil profile) of three major spices cinnamon, black pepper, and fennel at three different voltages (170, 200, 230 V) and exposure time (5, 10, 15 min). The surface etching and oxidative reactions of cold plasma is anticipated to cause microbial decontamination of the spices. In accordance with this, the ACP treatment significantly reduced the yeast and mold count of cinnamon, black pepper, and fennel, resulting in 1.3 Log CFU/g, 1.1 Log CFU/g, and 1.0 Log CFU/g, respectively even at the lowest treatment at 170 V-5 min. While at the highest treatment of 230 V-15 min, complete decontamination in all the samples was observed due to the plasma-induced microbial cell disruption. The water activity of samples reduced post-treatment 0.69 ± 0.02 to 0.51 ± 0.03 for cinnamon, 0.61 ± 0.03 to 0.49 ± 0.01 for pepper, and 0.60 ± 0.02 to 0.43 ± 0.02 for fennel which further reassures better microbial stability. The color and textural properties were significantly unaffected (p > 0.05) preserving the fresh-like attributes. The total phenolic content was increased for cinnamon (2.26 %), black pepper (0.11 %), and fennel (0.33 %) after plasma treatment at 230 V-15 min due to the cold plasma surface etching phenomenon. However, the essential oil composition revealed no significant variation in all three spices' control and treated samples. Thus, the study proves the potential of the atmospheric pressure cold plasma for the complete decontamination of the investigated spices (cinnamon, pepper, fennel) without remarkable changes in the volatile oil profile.

Atmospheric pressure pin-to-plate cold plasma effect on physicochemical, functional, pasting, thermal, and structural characteristics of proso-millet starch.

The present work aimed to study the influence of atmospheric pressure pin-to-plate cold plasma on the physicochemical (pH, moisture, and amylose content), functional (water & oil binding capacity, solubility & swelling power, paste clarity on storage, pasting), powder flow, thermal and structural (FTIR, XRD, and SEM) characteristics at an input voltage of 170-230 V for 5-15 min. The starch surface modification by cold plasma was seen in the SEM images which cause the surge in WBC (1.54 g/g to 1.93 g/g), OBC (2.22 g/g to 2.79 g/g), solubility (3.05-5.38% at 70 °C; 37.11-52.98% at 90 °C) and swelling power (5.39-7.83% at 70 °C; 25.67-35.33% at 90 °C) of starch. Reduction in the amylose content (27.82% to 25.07%) via plasma-induced depolymerization resists the retrogradation tendency, thereby increasing the paste clarity (up to Ì´ 39%) during the 5 days of refrigerated storage. However, the paste viscosity is reduced after cold plasma treatment yielding low-strength starch pastes. The relative crystallinity of starch increased (37.35% to 45.36%) by the plasma-induced fragmented starch granules which would aggregate and broaden the gelatinization temperature, but these starch fragments reduced the gelatinization enthalpy. The fundamental starch structure is conserved as seen in FTIR spectra. Thus, cold plasma aids in the production of soluble, low-viscous, stable, and clear paste-forming depolymerized proso-millet starch.

Factors governing consumers buying behavior concerning nutraceutical product.

In recent years, consumers are increasingly attracted to nutraceuticals, an important part of food considered propitious for human health. Therefore, consumers are willingly switching to nutraceuticals and are ready to pay the premium price. This review aims to identify various factors that govern consumer purchasing of nutraceutical products. The outcomes presented in the review provide a closer understanding of consumer attitudes toward buying behavior and their impact on the growth of the global nutraceutical market. The nutraceutical market has been identified depending on the type of nutraceuticals, forms, and regions governing the nutraceutical market. Factors such as health consciousness, knowledge about a product, product availability, price, marketing strategies, and social factors influence consumers' actual buying behavior toward nutraceutical products. A mini survey in Mumbai city of India was conducted to add practical data to the review, and factors affecting consumers' willingness to buy nutraceutical products were identified. It was observed that the decision-making toward buying nutraceutical products was affected by gender, age, education level, and acculturation. It was also identified that the legislation governing nutraceuticals needs to be harmonized throughout many parts of the world, which restricts the growth of this sector to some extent. The findings elucidate that nutraceutical industries should overcome the regulatory barriers and focus on developing innovative products, which will keep current consumers intact and help increase the consumer base and thus expand the nutraceutical market globally.

Study of the behavior and properties of frying oil on repetitive deep frying.

The current work focused on the effect of repetitive frying on the physicochemical characteristics of palm oil (PO)and sesame oil (SO) during the preparation of french fries by deep fat frying. A total of 16 frying cycles were carried out and the effect on various parameters was evaluated. The repetitive frying caused higher damage to sesame oil as compared with PO as observed from changes in FFA and PV which increased to 0.63 ± 0.12, 1.31 ± 0.16%, and 2.71 ± 0.02, 7.21 ± 0.01 meq/kg from an initial value of 0.28 ± 0.00, 0.93 ± 0.16% and 0.19 ± 0.00, 0.71 ± 0.00 meq/kg for PO, SO respectively. The fatty acid composition of SO showed significant change with a decrease in linoleic acid and oleic acid content from 42.7 ± 0.01 to 28.1 ± 0.03 and 36.2 ± 0.01 to 25.1 ± 0.01 after 16 frying cycles respectively. The oleic acid content of PO was less affected it decreased from an initial value of 42.4 ± 0.01 to 38.9 ± 0.01 after 16 cycles. The fatty acid composition of PO made it more stable to the repetitive frying process. The physical properties like density refractive index and viscosity of SO were badly affected by repetitive frying. The french fries fried in PO score higher overall acceptability in the sensory examination. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-023-05774-4.

Effect of atmospheric pin-to-plate cold plasma on oat protein: Structural, chemical, and foaming characteristics.

The impact of novel pin-to-plate atmospheric cold plasma was investigated with input voltage (170 V, 230 V) and exposure time (15 & 30 min) on oat protein by studying structural (FTIR, circular dichroism (CD), UV-vis, Fluorescence), morphological (particle size analysis, SEM, turbidity), chemical (pH, redox potential (ORP), ζ potential, carbonyl, sulfhydryl, surface hydrophobicity), and foaming characteristics. The plasma treatment reduced the pH while increasing the ORP of the dispersions. These ionic environment changes affected the ζ potential and particle size leading to the formation of larger aggregates (170-15; 230-15) and distorted smaller ones (170-30; 230-30) as confirmed by SEM. The FTIR spectra showed reduced intensity at specific amide bands (1600-1700 cm-1) and also an increase in carbonyl stretching (1743 cm-1) representing oxidative carbonylation (increase in carbonyl content). Thus, the partial exposure of hydrophobic amino acids increases surface hydrophobicity. The altered secondary structure (rise in α-helix, decrement in ß-sheets and turns), and tertiary structures were observed in circular dichroism (CD) and UV absorbance and fluorescence characteristics of proteins respectively. Furthermore, the increase in free sulfhydryl content and disulfide content was highly affected by the plasma treatments due to observed protein unfolding and aggregations. Besides, the increased solubility and reduced surface tension contributed to the improved foaming characteristics. Thus, plasma processing influences protein structure affecting their characteristics and other functionalities.

Effects of pin-to-plate atmospheric cold plasma for modification of pearl millet (Pennisetum glaucum) starch.

The present study was done to analyze the effect of atmospheric pressure non-thermal pin-to-plate plasma at a range of different voltages (170, 200, and 230V) at different time intervals (10, 20, and 30 mins) on under-utilized pearl millet starch. The untreated and treated starches were analyzed for amylose content, pH, carbonyl, and carboxyl group, reducing sugar, turbidity, water, and oil binding property, pasting property, DSC, FTIR, XRD, and molecular weight. As cold plasma contains highly reactive species and free radicals, it is expected to cause noticeable modifications in the attributes of treated starch. There has been a significant reduction (p < 0.05) in turbidity value by 38.97% and pH value of starch from 6.49 to 4.05. Plasma-treated samples produced clearer pastes with higher stability over storage time. Cold plasma treatment also led to an increase in the ζ potential. However, there has been no significant change in the water activity and oil-binding capacity of the starch. Reducing sugar content, average molecular weight, degree of polymerization, pasting property, XRD, and FTIR data confirmed that cross-linking takes place in samples treated at lower voltages and lesser time followed by depolymerization occurring in harshly treated plasma samples. The study thus points out the possible use of cold plasma for starch modification to produce starches with altered properties.

Application of microwave treatment for reduction of microbial load in jaggery cubes.

In present study, fresh jaggery cubes were used and treated with microwave heating. Two treatment time has been selected to treat the jaggery such as 30 s and 45 s. Physiochemical and microbial parameters were analysed before and after treatment of microwave. Moisture content of treated jaggery sample was 3.98 ± 0.59 and 3.86 ± 0.63 for 30 s and 45 s microwave treatment respectively. Similarly, this treatment maintains the water activity at 0.6, which is considered as a safe for consumption. The content of iron retains in this microwave treatment; it doesn't affect much on the iron content present in fresh Jaggery sample. Most substantial result has been observed in case of total plate count and yeast and mold count when treated with microwave heating. In this case microwave process at 45 s was found to be the best since it reduced the total plate count (TPC) load to 13 ± 4 from 194 ± 48 cfu/g. Also, in case on yeast and mold count, 45 s microwave treatment showed reduction of load to 28 ± 7 cfu/g from 25,498 ± 2809 cfu/g. Present investigation showed that microwave treatment for 45 s was found to be the best to treat the jaggery.

Triglycerides of medium-chain fatty acids: a concise review.

Medium-chain triglycerides contain medium-chain fatty acid esterified to the glycerol backbone. These MCFA have a shorter chain length and are quickly metabolized in the body serving as an immediate energy source. They are known to have good physiological as well as functional characteristics which help in treating various health disorders. Naturally, they are found in coconut oil, milk fat, and palm kernel oil, and they are synthetically produced by esterification and interesterification reactions. Due to their numerous health benefits, MCT is used as a functional or nutraceutical oil in various food and pharmaceutical formulations. To increase their nutraceutical benefits and food applications MCFA can be used along with polyunsaturated fatty acids in the synthesis of structured lipids. This review aims to provide information about triglycerides of MCFA, structure, metabolism, properties, synthetic routes, intensified synthesis approaches, health benefits, application, and safety of use of MCT in the diet.

Rheological performance of film-forming solutions and barrier properties of films fabricated from cold plasma-treated high methoxyl apple pectin and crosslinked by Ca2+: Impact of plasma treatment voltage.

Sustainable and "green" technologies, such as cold plasma are gaining attention in recent times for improving the functional properties of hydrocolloids. Chemical modifications of hydrocolloids require several chemicals and solvents, which are not environment-friendly. The major objective of the study was to understand the impact of plasma treatment (170-230 V|15 min) on the rheology of film-forming solutions (FFS) and the barrier properties of pectin films. The film-forming properties of plasma-treated pectin were investigated in the presence of two plasticizers, namely, glycerol and polyethylene glycol (PEG) 400. The effects of cross-linking by CaCl2 on the rheology of FFS and barrier properties of the films were discussed. A voltage-dependent decrease in the apparent viscosity of FFS was observed. The viscoelastic properties of the FFS were enhanced due to cross-linking. Glycerol exhibited a better plasticizing effect than PEG. Cross-linking and increasing voltage synergistically contributed towards lower oxygen and carbon dioxide transmission rates. The moisture sorption rate and capacity of the films increased with the voltage of the treatment. The resistance to extension of the films made from glycerol and PEG decreased with voltage, with no significant change in extensibility. On the other hand, the cross-linking by Ca2+ and plasma treatment enhanced the resistance to extension for the films made from both the plasticizers. While the increasing hydrophilicity and opacity of the films were a major drawback of plasma modification, the increase in UV barrier property of the films was an advantage of the modification.

The potential of subcritical water as a "green" method for the extraction and modification of pectin: A critical review.

Subcritical water is a "green" method of extraction and modification of pectin being explored in recent times. While the conventional acid extraction degrades the side chains and produces homogalacturonan (HG)-rich pectic polysaccharides, subcritical water extraction preserved the hairy region, namely the rhamnogalacturonan-I (RG-I) region of the pectin. However, higher temperatures (usually greater than 160 °C) degraded the RG-I and HG motifs, producing pectic oligosaccharides. A high selectivity towards pectic polysaccharides with a low protein content was observed during extraction by subcritical water. This can be majorly attributed to the heat-induced denaturation of proteins. Although the bioactive and emulsifying properties were more remarkable for subcritical water-extracted pectin, the rheological properties such as elasticity were negatively impacted. Apart from extraction, subcritical water can also be employed to aid the breakdown of pectic polysaccharides into oligosaccharides. The addition of several organic acids in subcritical water can help form pectic fragments, which are otherwise possible only by adding a cocktail of enzymes. For instance, carboxylic acids in subcritical water media can have a similar action to endo-polygalacturonase on the homogalacturonan backbone. It is worthwhile to note that intense extraction or modification conditions can form advanced glycation end products, which are undesirable and should be monitored throughout the modification process. Several thermodynamic and kinetic models can be employed to predict the breakdown of the pectin structure in subcritical conditions. Finally, this study suggests a strategy for obtaining the optimum process parameters, namely, temperature, duration, and the liquid:solid ratio for achieving maximum yield and the desired structure of the pectic polysaccharide.

Understanding the beneficial effect of using medium chain triglycerides in preparation of traditional puran poli.

In the present research work, medium-chain triglyceride (MCT) is used in the preparation of puran poli. Effect of MCT on various attributes likes textural, microbiological, sensory and oxidative stability of puran poli was studied. Use of MCT showed a positive effect on the texture of puran poli without use of hydrocolloids. Texture of puran poli became soft after storage of 15 and 25 days at 25 ± 2 °C and 4 ± 2 °C respectively. Puran poli showed no bacterial growth at both the storage conditions, however, there was yeast and mould growth on Puran poli stored at 25 ± 2 °C after 25 days i.e., 3 × 101 CFU/gm sample, which was safe for consumption as per WHO guidelines. pH showed a marginal change from 6.56 to 6.11 for puran poli stored at 25 ± 2 °C and from 6.62 to 6.33 for puran poli stored at 4 ± 2 °C. Sensory attributes like colour, taste, texture was not affected by the use of medium-chain triglyceride. Overall acceptability of puran Poli was satisfactory for the storage period of 30 days at 4 ± 2 °C.

Untargeted metabolite profiling of Enterococcus villorum SB2, isolated from the vagina of pregnant women, by HR-LCMS.

Enterococcus bacteria are studied in various sectors including fermentation, food and dairy industries,as well as studied for their probiotic properties but have limited use due to their possible pathogenic behavior. The present report talks about the metabolites produced, by the previously isolated Enterococcus strain, E.villorum SB2 (accession number KX830968), from the vaginal source. The growth of the bacteria in three types of media (M17, MRS and LAPTg) was compared, where the M17 media gave better bacterial colonies, also maximum growth rate was observed in M17 media (Td = 1.6 h & k = 0.4 h-1), and thus was selected as the metabolite production media. Further, the studied bacteria did not show any hemolytic activity, making it safe for industrial applications. The HR-LCMS results showed the production of various amino acids, organic acids, peptides, and other metabolites like flavonoids (Quercetin 3-O-Manoglucoside), terpenoids (7',8',Dihydro-8'-hydroxycitraniaxanthin, O-Methylganoderic acid O, Thalicsessine, Austinol, Valdiate), indole derivatives produced by tryptophan metabolism (5-hydroxykynurenamine, 2S,4R)-4-(9H-Pyrido[3,4-b]indol-1-yl)-1,2,4-butanetriol, Indoleacrylic acid), antimicrobial compounds (Fortimicin A) and fatty acids (Stearic acid, Myristic acid), which were earlier unreported form Enterococcus species opening new scope for discovering new industrial applications of the strain. As the studied bacteria has been reported to be a potential probiotic, the detection of these industrially important metabolites can be studied further in future studies to reveal the potential industrial applications of the strain.

Intensified synthesis of a triglyceride of octanoic acid using sonication and assessment of its frying characteristics.

Intensification in synthesis of triglycerides of octanoic acid using a heterogeneous amberlyst-15 catalyst has been investigated with the application of ultrasound under solvent-free conditions. Further, the frying characteristics of medium-chain triglycerides (tricaprin) are evaluated by deep frying of French fries in various combinations of palm oil and tricaprin. Understanding into the effect of parameters such as the temperature of the reaction (over the range of 40 °C-80 °C), loading of amberlyst-15 (1%-5%) and molar ratio of fatty acid to glycerol (3:1-3:5) along with the ultrasound conditions as duty cycle (40%-90%) and time on the conversion (%) has also been developed. Based on the outcomes of the study, optimum reaction conditions seen are 3:4 as the molar ratio of fatty acid (C8): glycerol, amberlyst-15 loading of 3% and a reaction temperature of 50 °C. It was further observed that the optimum ultrasound conditions required for maximum conversion of 99.8% were 240 W power, 80% duty cycle and 15 min as the ultrasound irradiation time. Under similar conditions, the conventional synthesis resulted in only 20% conversion in 15 min. Reusability studies also established that the acid-resin catalyst was effectively reused for 8 times. The PV, p-AV and TPC of frying oil combination containing higher tricaprin (50:50-palm oil: MCT) was 8.4 ± 0.8, 23.1 ± 0.01 and 29.8 ± 0.01 respectively, which were lowest as compared with other blends indicating the beneficial effects of MCT in frying applications. The work clearly shows that the ultrasound application for the synthesis of triglyceride of octanoic acid gives higher conversion (%) in a less time and also demonstrates that MCT could be a good alternative for deep frying of foods in combination with palm oil to enhance the shelf-life of food. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-022-05379-3.

Trends in "green" and novel methods of pectin modification - A review.

Modification of hydrocolloids to alter their functional properties using chemical methods is well documented in the literature. There has been a recent trend of adopting eco-friendly and "green" methods for modification. Pectin, being a very important hydrocolloid finds its use in various food applications due to its gelling, emulsifying, and stabilizing properties. The adoption of various "green" methods can alter the properties of pectin and make it more suitable for incorporation in food products. The novel approaches such as microwave and pulsed electric field can also be utilized for solvent-free modification, making it desirable from the perspective of sustainability, as it reduces the consumption of organic chemicals. Pectic oligosaccharides (POSs) produced via novel approaches are being explored for their biological properties and incorporation in various functional foods. The review can help to set the perspective of potential scale-up and adoption by the food industry for modification of pectin.

Clean meat: techniques for meat production and its upcoming challenges.

Meat is traditionally obtained by sacrificing the animals. It is considered as one of the richest sources of proteins. There is an increasing demand for meat worldwide. It may not be possible to fulfill this demand for meat in future. Therefore, there is an urgent need to find out the alternative resources for proteins requirement shortly. Clean meat production is one of the best methods to be adopted as an alternative to traditional meat. The word 'clean' signifies that we can procure meat from animals without its monstrous slaughtering. Hence, it is prepared by isolating a single cell and culturing them in controlled growth conditions and medium that mimic the in vivo condition. It is not a brand new technology, but the tools for developing clean meat that mimics real meat have been technologically advanced recently. Many companies have marketed clean meat products worldwide from last five years. And it has been observed that there are mixed responses for its acceptance by consumers. The main driving forces for clean meat production derives from the concerns over environment, animal welfare, public and consumer health aspects of animal production, use of antibiotics in the animal industries, and food security. Since it's an upcoming meat production technology, there are many hurdles and challenges like nutritional attributes, flavor, shape, and structure compared to real meat. It requires many skills and understanding of muscle stem cells' regeneration and their growth under optimized scale-up production conditions. In this paper the complete details about clean meat, types of cells, and techniques used for its production has been discussed on a lab scale.