Improvement of retinal function in Alzheimer disease-associated retinopathy by dietary lysophosphatidylcholine-EPA/DHA.

Alzheimer disease (AD) is the most prevalent cause of dementia in the elderly. Although impaired cognition and memory are the most prominent features of AD, abnormalities in visual functions often precede them, and are increasingly being used as diagnostic and prognostic markers for the disease. Retina contains the highest concentration of the essential fatty acid docosahexaenoic acid (DHA) in the body, and its deficiency is associated with several retinal diseases including diabetic retinopathy and age related macular degeneration. In this study, we tested the hypothesis that enriching retinal DHA through a novel dietary approach could ameliorate symptoms of retinopathy in 5XFAD mice, a widely employed model of AD. The results show that 5XFAD mice have significantly lower retinal DHA compared to their wild type littermates, and feeding the lysophosphatidylcholine (LPC) form of DHA and eicosapentaenoic acid (EPA) rapidly normalizes the DHA levels, and increases retinal EPA by several-fold. On the other hand, feeding similar amounts of DHA and EPA in the form of triacylglycerol had only modest effects on retinal DHA and EPA. Electroretinography measurements after 2 months of feeding the experimental diets showed a significant improvement in a-wave and b-wave functions by the LPC-diet, whereas the TAG-diet had only a modest benefit. Retinal amyloid ß levels were decreased by about 50% by the LPC-DHA/EPA diet, and by about 17% with the TAG-DHA/EPA diet. These results show that enriching retinal DHA and EPA through dietary LPC could potentially improve visual abnormalities associated with AD.

Removal of detergents from proteins and peptides in a spin-column format.

To enable downstream analysis, it is critical to remove unbound detergents from protein and peptide samples. This unit describes the use of a high-performance resin that offers exceptional detergent removal for proteins and peptides. The easy-to-use spin format significantly improves results over the standard drip column and batch methodologies, with >95% removal of 1% to 5% detergents, including SDS, sodium deoxycholate, CHAPS, Triton X-100, Triton X-114, NP-40, Brij-35, octyl glucoside, octyl thioglucoside, and lauryl maltoside, with high recovery of proteins and peptides. Detergent removal efficiency is evaluated using colorimetric methods and mass spectrometry (MS). BSA tryptic peptides have been successfully analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) and matrix-assisted laser desorption/ionization (MALDI)-MS for identification of protein, following detergent removal using the resin. Advantages of this method include speed (less than 15 min), efficient detergent removal, and high recovery of proteins and peptides.

Efficient removal of detergents from proteins and peptides in a spin column format.

Detergents are commonly used in protein-chemistry protocols and may be necessary for protein extraction, solubilization, and denaturation; however, their presence interferes with many downstream analysis techniques, including mass spectrometry (MS). To enable downstream analysis, it is critical to remove unbound detergents from protein and peptide samples. In this study, we describe a high-performance resin that offers exceptional detergent removal for proteins and peptides. When used in a spin column format, this resin dramatically improves protein and peptide MS results by more than 95% removal of 1-5% detergents, including sodium dodecyl sulfate (SDS), sodium deoxycholate, Chaps, Triton X-100, Triton X-114, NP-40, Brij-35, octyl glucoside, octyl thioglucoside, and lauryl maltoside, with high recovery of proteins and peptides. Postcolumn liquid chromatography-tandem MS (LC-MS/MS) analysis of trypsin digests of bovine serum albumin (BSA) and HeLa cell lysate revealed excellent sequence coverage, indicating successful removal of detergent from the peptides. Matrix-assisted laser desorption/ionization (MALDI)-MS analysis of unprocessed and processed samples further confirmed efficient removal of detergents. The advantages of this method include speed (<15min), efficient detergent removal, and high recovery of proteins and peptides.

Quantitation of proteins using a dye-metal-based colorimetric protein assay.

We describe a dye-metal (polyhydroxybenzenesulfonephthalein-type dye and a transition metal) complex-based total protein determination method. The binding of the complex to protein causes a shift in the absorption maximum of the dye-metal complex from 450 to 660 nm. The dye-metal complex has a reddish brown color that changes to green on binding to protein. The color produced from this reaction is stable and increases in a proportional manner over a broad range of protein concentrations. The new Pierce 660 nm Protein Assay is very reproducible, rapid, and more linear compared with the Coomassie dye-based Bradford assay. The assay reagent is room temperature stable, and the assay is a simple and convenient mix-and-read format. The assay has a moderate protein-to-protein variation and is compatible with most detergents, reducing agents, and other commonly used reagents. This is an added advantage for researchers needing to determine protein concentrations in samples containing both detergents and reducing agents.

Botulinum neurotoxin types A, B, and E: fragmentations by autoproteolysis and other mechanisms including by O-phenanthroline-dithiothreitol, and association of the dinucleotides NAD(+)/NADH with the heavy chain of the three neurotoxins.

The first evidence of autoproteolytic activity of the approximately 50-kDa light chain of the clostridial neurotoxins (NT) is traceable to the observations that the light chains of botulinum NT serotypes A and E, separated from their approximately 100-kDa heavy chain conjugate, were found cleaved at the amino side of Tyr250 and Arg244, respectively [DasGupta and Foley (1989). Biochimie 71: 1183-1200]. Specific cleavages of the recombinant light chain of NT type A, including at Tyr249-Tyr250, firmly established that the cleavages reported earlier were due to autoproteolysis [Ahmed et al. (2001). J. Protein Chem. 20: 221-231; Ahmed et al. (2003). Biochemistry 42:12539-12549] and not by contaminating proteases or non-enzymatic. We now report many cleavages in the NT types A, B and E and also in their separated light and heavy chains, and identification of several of the peptide bonds cleaved. None of the identified cleaved bonds (-P1-P1' -) in one serotype (except Asp-Pro) was found common in other serotypes or cleaved within itself at a second site. After separation from the heavy chain self-cleavages of the light chains of type A, B and E at Tyr249-Tyr250, Gln258-Ser259 and Ile243-Arg244, respectively indicate an intriguing feature (in the aligned sequences these bonds of type A and B are 2 and type A and E are 4 peptide bonds apart) that may have some role in the NT's structure-function relationship yet to be understood. We point out that autoproteolysis of a single peptide bond (Phe418-Thr419 or Phe422-Glu423) in NT type A reported by Ahmed et al. (2001) can potentially generate proteolytically active light chain freed of the heavy chain; this is an efficient pathway, that by-passes nicking by a trypsin-like protease(s) inside the intrachain disulfide bridge and its reductive cleavage. We offer probable explanations for the observed cleavages such as acid- and metal-mediated (non-catalytic and non-stoichiometric) reactions in addition to autoproteolysis but cannot predict which mechanism(s) of cleavage occur or prevail following NT's entry in the body as poison or therapeutic agent. The metal chelator O-phenanthroline (above critical miceller concentration) in the presence of dithiothreitol cleaved type E NT at limited sites generating discrete 114-, 87-, 49-, 42-, and 31-kDa fragments but degraded NTs type A and B extensively. The limited cleavage of type E NT was dependent on the presence of metal ion(s) bound to the protein and its native (urea sensitive) conformation. The self-cleavage of the NTs at specific sites prompted us to search for specific binding sites on the NTs analogous to SNARE-motifs-the 9-residuelong motifs present on the NT's natural substrates (SNAP-25, syntaxin, VAMP/synaptobrevin); such putative binding motifs (sites) noted on all clostridial NTs are reported here. Their relationship to the observed autoproteolysis remains to be determined experimentally. The dinucleotide NAD(+)/NADH associated with the NTs type A, B and E (2-3 NADH per protein molecule) via their H-chains, and a portion of the H-chain (toward the C-terminus) appears to exhibit limited amino acid sequence homology with lactate dehydrogenase-a representative NAD(+)/NADH binding protein.

Solid-phase biotinylation of antibodies.

Biotinylation is an established method of labeling antibody molecules for several applications in life science research. Antibody functional groups such as amines, cis hydroxyls in carbohydrates or sulfhydryls may be modified with a variety of biotinylation reagents. Solution-based biotinylation is accomplished by incubating antibody in an appropriate buffered solution with biotinylation reagent. Unreacted biotinylation reagent must be removed via dialysis, diafiltration or desalting. Disadvantages of the solution-based approach include dilution and loss of antibody during post-reaction purification steps, and difficulty in biotinylation and recovery of small amounts of antibody. Solid-phase antibody biotinylation exploits the affinity of mammalian IgG-class antibodies for nickel IMAC (immobilized metal affinity chromatography) supports. In this method, antibody is immobilized on a nickel-chelated chromatography support and derivitized on-column. Excess reagents are easily washed away following reaction, and biotinylated IgG molecule is recovered under mild elution conditions. Successful solid phase labeling of antibodies through both amine and sulfhydryl groups is reported, in both column and mini-spin column formats. Human or goat IgG was bound to a Ni-IDA support. For sulfhydryl labeling, native disulfide bonds were reduced with TCEP, and reduced IgG was biotinylated with maleimide-PEO(2) biotin. For amine labeling, immobilized human IgG was incubated with a solution of NHS-PEO(4) biotin. Biotinylated IgG was eluted from the columns using a buffered 0.2 M imidazole solution and characterized by ELISA, HABA/avidin assay, probing with a streptavidin-alkaline phosphatase conjugate, and binding to a monomeric avidin column. The solid phase protocol for sulfhydryl labeling is significantly shorter than the corresponding solution phase method. Biotinylation in solid phase is convenient, efficient and easily applicable to small amounts of antibody (e.g. 100 microg). Antibody biotinylated on-column was found to be equivalent in stability and antigen-recognition ability to antibody biotinylated in solution. Solid-phase methods utilizing Ni-IDA resin have potential for labeling nucleic acids, histidine-rich proteins and recombinant proteins containing polyhistidine purification tags, and may also be applicable for other affinity systems and labels.

A high-affinity reversible protein stain for Western blots.

We describe a reversible staining technique, using MemCode, a reversible protein stain by which proteins can be visualized on nitrocellulose and polyvinylidine fluoride (PVDF) membranes without being permanently fixed to the membrane itself. This allows subsequent immunoblot analysis of the proteins to be performed. The procedure is applicable only to protein blots on nitrocellulose and PVDF membranes. MemCode is a reversible protein stain composed of copper as a part of an organic complex that interacts noncovalently with proteins. MemCode shows rapid protein staining, taking 30s to 1 min for completion. The method is simple and utilizes convenient application conditions that are compatible with the matrix materials and the protein. The stain is more sensitive than any previously described dye-based universal protein staining system. The turquoise-blue-stained protein bands do not fade with time and are easy to photograph compared to those stained with Ponceau S. Absorbance in the blue region of the spectrum offers good properties for photo documentation and avoids interference from common biological chromophores. The stain on the protein is easily reversible in 2 min for nitrocellulose membrane and in 10 min for PVDF membrane with MemCode stain eraser. The stain is compatible with general Western blot detection systems, and membrane treatment with MemCode stain does not interfere with conventional chemiluminescent or chromogenic detection using horseradish peroxide and alkaline phosphatase substrates. The stain is also compatible with N-terminal sequence analysis of proteins.