Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 3 de 3
Filter
Add more filters










Database
Language
Publication year range
1.
Opt Express ; 23(22): 28244-57, 2015 Nov 02.
Article in English | MEDLINE | ID: mdl-26561095

ABSTRACT

Thermal drifts in long fiber-optic delay lines are compensated based on chromatic dispersion. An arbitrary input radio-frequency (RF) waveform and a control RF sine wave modulate two different tunable laser sources and are coupled into the fiber delay line. The RF phase of the control tone at the output of the delay line is monitored and used to adjust the wavelengths of both sources, so that the effects of thermal drifts and dispersion cancel out. The input and control waveforms are separated in the optical domain, and no restrictions are imposed on their RF spectra. A figure of merit is proposed, in terms of the fiber delay, range of temperature changes that may be compensated for, and residual delay variations. An upper bound on performance is established in terms of the specifications of the tunable lasers. The principle is used in the stable distribution of sine waves and of broadband linear frequency-modulated (LFM) waveforms, which are commonly employed in radar systems. Lastly, the method is incorporated in stable interrogation of a localized hot-spot within a high-resolution, distributed Brillouin fiber sensing setup. The results demonstrate the applicability of the proposed protocol in the processing of arbitrary waveforms, as part of larger, more complex systems.

2.
Opt Express ; 20(6): 6157-62, 2012 Mar 12.
Article in English | MEDLINE | ID: mdl-22418495

ABSTRACT

We propose and experimentally demonstrate new architectures to realize multi-tap microwave photonic filters, based on the generation of a single or multiple dynamic Brillouin gratings in polarization maintaining fibers. The spectral range and selectivity of the proposed periodic filters is extensively tunable, simply by reconfiguring the positions and the number of dynamic gratings along the fiber respectively. In this paper, we present a complete analysis of three different configurations comprising a microwave photonic filter implementation: a simple notch-type Mach-Zehnder approach with a single movable dynamic grating, a multi-tap performance based on multiple dynamic gratings and finally a stationary grating configuration based on the phase modulation of two counter-propagating optical waves by a common pseudo-random bit sequence (PRBS).


Subject(s)
Fiber Optic Technology/instrumentation , Models, Theoretical , Refractometry/instrumentation , Computer Simulation , Computer-Aided Design , Equipment Design , Equipment Failure Analysis , Light , Microwaves , Photons , Scattering, Radiation
3.
Opt Express ; 20(7): 7807-21, 2012 Mar 26.
Article in English | MEDLINE | ID: mdl-22453458

ABSTRACT

A novel technique for the localization of stimulated Brillouin scattering (SBS) interaction is proposed, analyzed and demonstrated experimentally. The method relies on the phase modulation of two counter-propagating optical waves by a common pseudo-random bit sequence (PRBS), these waves being spectrally detuned by the Brillouin frequency shift. The PRBS symbol duration is much shorter than the acoustic lifetime. The interference between the two modulated waves gives rise to an acoustic grating that is confined to narrow correlation peaks, as short as 1.7 cm. The separation between neighboring peaks, which is governed by the PRBS length, can be made arbitrarily long. The method is demonstrated in the generation and applications of dynamic gratings in polarization maintaining (PM) fibers. Localized and stationary acoustic gratings are induced by two phase modulated pumps that are polarized along one principal axis of the PM fiber, and interrogated by a third, readout wave which is polarized along the orthogonal axis. Using the proposed technique, we demonstrate the variable delay of 1 ns-long readout pulses by as much as 770 ns. Noise due to reflections from residual off-peak gratings and its implications on the potential variable delay of optical communication data are discussed. The method is equally applicable to the modulation of pump and probe waves in SBS over standard fibers.


Subject(s)
Computer-Aided Design , Lasers, Solid-State , Models, Theoretical , Optical Devices , Refractometry/instrumentation , Computer Simulation , Equipment Design , Equipment Failure Analysis , Light , Scattering, Radiation
SELECTION OF CITATIONS
SEARCH DETAIL
...