ABSTRACT
The scale up of production processes is a major challenge in pharmaceutical industry. Using a quality by design approach, upscaling can be based on the design space, which can be assessed on a small scale. In a previous study, the critical process parameters were identified by a definitive screening design on cetomacrogol ointment. In the current study, this lab scale (0.5 kg) study was scaled up to industrial scale (2000 kg, filling 100g tubes at 75 tubes/min). A similar trend for the influence of filling temperature on ointment yield stress was found for lab and industrial scale production. Furthermore, a process window for ointment filling viscosities was established. It was shown that between 26 and 170 Pa.s ointment could be filled into tubes with a low weight variation (< 0.5% RSD) resulting in a product with a yield stress that meets the pre-set criteria. This approach was subsequently verified using several creams and ointments and showed general applicability.
Subject(s)
Cetomacrogol/chemical synthesis , Chemistry, Pharmaceutical/methods , Drug Industry/methods , Surface-Active Agents/chemical synthesis , Dosage Forms , Ointments/chemical synthesis , Temperature , ViscosityABSTRACT
Degradation of triamcinolone acetonide (TCA) in an ointment was investigated. TCA appeared to be concentrated in propylene glycol (PG) which in turn is dispersed in a lanolin-petrolatum mixture. Two predominant degradation products were identified: a 21-aldehyde and a 17-carboxylic acid. The 21-aldehyde is formed after TCA is oxidized by O2, a reaction that is catalyzed by trace metals. Logically, the content of trace metals has a profound effect on the degradation rate. It was shown that trace metals are extracted from lanolin and petrolatum by PG, increasing the concentration in PG. In accordance with these findings, TCA degrades faster in PG that is present in the ointment formulation than in regular PG. The 21-aldehyde was confirmed to be a primary degradation product, while the 17-carboxylic acid was identified as a secondary degradation product. Based on the mechanism of degradation, the ointment can be stabilized by the addition of sodium metabisulfite which was shown to reside also in the PG phase within the ointment.
Subject(s)
Ointments/chemistry , Triamcinolone Acetonide/administration & dosage , Triamcinolone Acetonide/chemistry , Drug Stability , Excipients , Petrolatum/chemistry , Propylene Glycol/chemistry , Sulfites/chemistryABSTRACT
OBJECTIVE: To evaluate Diabeto, a computer-assisted diet education system. RESEARCH DESIGN AND METHODS: One hundred five patients with insulin-dependent diabetes mellitus (IDDM) or non-insulin-dependent diabetes mellitus (NIDDM) were divided into two randomized groups to participate in the evaluation of Diabeto. With free access through Minitel, the French public videotex network, Diabeto helps diabetic patients self-monitor their diets and balance their meals with personalized counseling. RESULTS: During the first 6-mo study, group A (54 patients) used Diabeto, whereas group B (51 patients) were control subjects. For the second 6-mo study, group B used the system. Evaluation was based on patients' dietetic knowledge, dietary habits, and metabolic balance. CONCLUSIONS: Diabeto led to a significant improvement of dietetic, knowledge in group A (P less than 0.0005) and also to improved dietary habits; decreased caloric intake in patients initially overeating (P less than 0.05), increase of dietary carbohydrate from 39.7 +/- 0.7 to 42.9 +/- 0.9% in patients with an initial intake less than 45% carbohydrate, and decrease of fat intake from 41.9 +/- 0.9 to 37.4 +/- 1.1% in patients with an initial intake of greater than 35% fat (P less than 0.0005). In the second study, in addition to similar improvements to those observed in the first study, HbA1 decreased from 11.0 +/- 0.4 to 9.9 +/- 0.4% (P less than 0.005) and fructosamine from 5.00 +/- 0.17 to 4.57 +/- 0.17% (P less than 0.001). Diabeto appears to be an effective therapeutic tool in the control of metabolic diseases.
