The Effect of Non-Solvent Nature on the Rheological Properties of Cellulose Solution in Diluted Ionic Liquid and Performance of Nanofiltration Membranes.

The weak point of ionic liquids is their high viscosity, limiting the maximum polymer concentration in the forming solutions. A low-viscous co-solvent can reduce viscosity, but cellulose has none. This study demonstrates that dimethyl sulfoxide (DMSO), being non-solvent for cellulose, can act as a nominal co-solvent to improve its processing into a nanofiltration membrane by phase inversion. A study of the rheology of cellulose solutions in diluted ionic liquids ([EMIM]Ac, [EMIM]Cl, and [BMIM]Ac) containing up to 75% DMSO showed the possibility of decreasing the viscosity by up to 50 times while keeping the same cellulose concentration. Surprisingly, typical cellulose non-solvents (water, methanol, ethanol, and isopropanol) behave similarly, reducing the viscosity at low doses but causing structuring of the cellulose solution and its phase separation at high concentrations. According to laser interferometry, the nature of these non-solvents affects the mass transfer direction relative to the forming membrane and the substance interdiffusion rate, which increases by four-fold when passing from isopropanol to methanol or water. Examination of the nanofiltration characteristics of the obtained membranes showed that the dilution of ionic liquid enhances the rejection without changing the permeability, while the transition to alcohols increases the permeability while maintaining the rejection.

Modified Technogenic Asphaltenes as Enhancers of the Thermal Conductivity of Paraffin.

The low thermal conductivity of paraffin and other organic phase change materials limits their use in thermal energy storage devices. The introduction of components with a high thermal conductivity such as graphene into these materials leads to an increase in their thermal conductivity. In this work, we studied the use of inexpensive carbon fillers containing a polycyclic aromatic core, due to them having a structural similarity with graphene, to increase the thermal conductivity of paraffin. As such fillers, technogenic asphaltenes isolated from ethylene tar and their modified derivatives were used. It is shown that the optimal concentration of carbon fillers in the paraffin composite, which contributes to the formation of a structural framework and resistance to sedimentation, is 5 and 30 wt. %, while intermediate concentrations are ineffective, apparently due to the formation of large aggregates, the concentration of which is insufficient to form a strong framework. It has been found that the addition of asphaltenes modified with ammonium persulfate in acetic acid significantly increases the thermal conductivity of paraffin by up to 72%.