3D Digital Image Correlation Analysis of the Shrinkage Strain in Four Dual Cure Composite Cements.

The introduction of resin-based cements and an adhesive-bonding system in daily dental practice has given the opportunity to increase the retention of previously conventional cemented restorations and the optimal results in esthetic. This experimental study employed the 3D Digital Image Correlation Method (3D-DIC) for detecting shrinkage strain in four dual cured composite cements. The aim was to visualize measure, analyze, and compare strain fields in four resin-based cements using the 3D-DIC method. A total of 72 samples were divided into 4 groups considering variations in sample types, diameter, and thickness. Four types of composite cements: RelyX U200 (3 M ESPE, St. Paul, MN, USA), MaxCem Elite (Kerr, Orange, CA, USA), Multilink Automix (Ivoclar Vivadent, Schaan, Liechtenstein), and SeT PP (SDI, Australia) were used. Each type had diameters of 3 mm, 4 mm, and 5 mm, respectively, combined with two different values of thickness: 1 mm and 2 mm. Thickness had an important role on strain detected in all tested materials showing higher strain in samples with 2 mm thickness compared to 1 mm samples. Shrinkage strain values were the highest in Set PP samples indicated the possibility of undesirable de-bonding.

Partitioning of particulate matter and elements of suburban continental aerosols between fine and coarse modes.

The results presented in this work demonstrate for the first time a distribution of elements in the spectral analysis of aerosols in the suburban continental Balkan Peninsula. Samples were collected in the suburban area of Belgrade (Serbia) in the period from March 2012 till December 2013. Results presented here are from long-term measurements of masses of size-segregated aerosols and macro- and microelements in the range of PM0.27-16. The following elements were analyzed: Al, Ag, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Ni, Pb, Sb, Ti, Tl, V, and Zn; levels of Be, Hg, and Se were under the detection limits in all samples. Average concentrations and time and seasonal variations of particulate matter (PM) as well as element contents and their percentage shares are given. The results showed the domination of particle content around the accumulation mode in the range of 0.53 < Dp < 1.06 µm, but the fractional distribution of elements showed maximal average concentrations in different fractions depending on the origin of each element. Crustal elements (Al, Ca, Fe, Mg, Mn, Ti, etc.) dominated in coarse mode, while anthropogenic elements (As, Cd, Cu, Pb, Sb, etc.) were mainly distributed in fine mode fractions. Some elements, such are As and Ni, were detected in investigated aerosols only occasionally, while others, such as Ca, Fe, and Mg, were detected in all analyzed samples. The application of multivariate analysis (PCA) demonstrated the connection between the elements of similar origin, in fine fractions mainly of anthropogenic origin, while in coarse mode of crustal origin, indicating the resuspension with contribution of about 40%. The contents of some measured elements were compared with their contents in aerosols in some European suburban areas.

Plant growth-promoting bacteria elevate the nutritional and functional properties of black cumin and flaxseed fixed oil.

BACKGROUND: In order to study the influence of plant growth-promoting bacteria (PGPB) belonging to Streptomyces sp., Paenibacillus sp., and Hymenobacter sp. on fixed oil content of flaxseed and black cumin, 2-year field experiments were conducted. PGPB was applied during seedtime of plants. The extraction of oil from seeds was performed using supercritical CO2 . RESULTS: The addition of PGPB significantly increases the content of C18:1 (from 16.06 ± 0.03% to 16.97 ± 0.03%) and C18:3 (from 42.97 ± 0.2% to 45.42 ± 0.5%) in flaxseed oil and C18:2 (from 52.68 ± 0.50% to 57.11 ± 0.40%) and C20:2 (from 4.34 ± 0.02% to 4.54 ± 0.03%) in black cumin seed oil. The contents of total polyphenols, flavonoids, and carotenoids, as well as antioxidant activity measured by ferric-reducing ability of plasma assay, were found to be greater in the oil from the seeds of plants treated with the PGPB, compared with the respective non-treated samples. CONCLUSION: The use of PGPB enhances plant nutritive properties; these represent a great source for obtaining valuable functional food ingredients. © 2017 Society of Chemical Industry.

Customizing the spent coffee for Trichoderma reesei cellulase immobilization by modification with activating agents.

This study has explored the possibility to reuse the waste, spent coffee material for the cellulase enzyme immobilization. By the coffee surface modification with different activating agents, it was attempted to develop the convenient method for creation of a capable porous carrier for this purpose. Among the most common activating agents, glutaraldehyde, chlorine dioxide and hydrogen peroxide provided the most acceptable choice for the coffee surface modification. The changes that occurred on the coffee surface due to agents' treatment exposure were recorded by using of the FTIR spectra and SEM micrographs. The highest immobilization yield (55%) and immobilization efficiency (45%) were attained during 30min of the treatment time, by employing of 30% chlorine dioxide aqueous solution within 6mL/g activator/carrier ratio. The kinetic process was found to be predicted by the pseudo-second-order model. The cellulase immobilization onto the coffee surface provides an excellent base for increasing the enzyme availability to the substrate and enhancing the enzyme productivity, by offering the new perspectives to the industrial sector.

Utilization of spent coffee grounds for isolation and stabilization of Paenibacillus chitinolyticus CKS1 cellulase by immobilization.

This study has explored the feasibility of using spent coffee grounds as a good supporting material for the Paenibacillus chitinolyticus CKS1 cellulase immobilization. An optimal operational conditions in a batch-adsorption system were found to be: carrier mass of 12 g/L, under the temperature of 45 °C and no pH adjustments. The immobilization yield reached about 71%. An equilibrium establishment between the cellulase and the carrier surface occurred within 45 min, whereas the process kinetics may be predicted by the pseudo-second-order model. An immobilized cellulase preparation expressed very good avicelase activity, this reached up to 2.67 U/g, and revealed an improved storage stability property, compared to free enzyme sample counterpart. The addition of metal ions, such as K(+) and Mg(2+) did not affect positively immobilization yield results, but on the contrary, contributed to an improved bio-activities of the immobilized cellulase, thus may be employed before each enzyme application. The method developed in this study offers a cheap and effective alternative for immediate enzyme isolation from the production medium and its stabilization, compared to other carriers used for the immobilization.

Pharmacokinetics and toxicity predictors of new s-triazines, herbicide candidates, in correlation with chromatogrpahic retention constants.

Herbicides, which are ubiquitously present in soil and food, have been proven to cause human health hazard effects, hence development of new herbicide-active compounds is recommended. In this paper, nine 2,4-bis(cycloalkyl)-6-chloro-s-triazines were considered as herbicide candidates and their pharmacokinetics and toxicity were reviewed on the basis of in silico descriptors. Both, pharmacokinetic and toxicity predictors were presented as functions of their lipophilicity, quantified with retention constants that were obtained by liquid chromatography. None of the candidates investigated has functional groups for genotoxicity hazards and endocrine disruptions; they have acceptable toxicity and favorable pharmacokinetic properties based on computer-aided analyses. Two candidates have been selected as lead compounds for further research.

Novel composite films based on amidated pectin for cationic dye adsorption.

Pectin, with its tendency to gel in the presence of metal ions has become a widely used material for capturing the metal ions from wastewaters. Its dye-capturing properties have been much less investigated, and this paper is the first to show how films based on amidated pectin can be used for cationic dye adsorption. In the present study amidated pectin/montmorillonite composite films were synthesized by membrane casting, and they are stable in aqueous solution both below and above pectin pKa. FTIR, thermogravimetry and SEM-EDAX have confirmed the presence of montmorillonite in the cast films and the interactions between the two constituents. In order to evaluate the cationic dye adsorption of these films Basic Yellow 28 was used, showing that the films have higher adsorption capacity compared to the others reported in the literature. The results were fitted into Langmuir, Freundlich and Temkin isotherms indicating an exothermic process and setting the optimum amount of montmorillonite in the films to 30% of pectin mass. According to the Langmuir isotherm the maximum adsorption capacity is 571.4 mg/g.

Characterization of chitosan/montmorillonite membranes as adsorbents for Bezactiv Orange V-3R dye.

The synthesis, characterization and environmental application of chitosan/montmorillonite membrane for adsorption Bezactiv Orange V-3R were investigated. Chitosan/montmorillonite membranes were synthesized in different ratios, containing 10-50% of montmorillonite (MMT) in membrane. These membranes were characterized by using Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG) and scanning electron microscopy (SEM). The adsorption kinetics were investigated using three different concentrations of Bezactiv Orange dye (30, 50 and 80 mg/L). The adsorption capacity increases with increasing amount of MMT in membranes. These membranes show the highest adsorption capacity when the initial dye concentration was 80 mg/L. The results show that the optimum condition for adsorption of Bezactiv Orange is pH 6. A comparison of kinetic models was evaluated for the pseudo-first and pseudo-second order and intra-particle diffusion. The experimental data were fitted to the pseudo-second order kinetic model, and also followed by intra-particle diffusion. Intra-particle diffusion is not the only rate-controlling step. The Langmuir and Freundlich adsorption isotherms were applied to experimental equilibrium data at different concentration of dye solution. The results indicated the competency of chitosan/MMT membranes adsorbent for Bezactiv Orange adsorption.

Complexation of amidated pectin with poly(itaconic acid) as a polycarboxylic polymer model compound.

Complexes based on amidated pectin (AP) and poly(itaconic acid) (PIA) were prepared by casting films from solutions of AP and PIA in different ratios with the pectin amount ranging from 10% to 90% by mass. The complexes were investigated by elemental analysis, Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetry (TG). In all investigated ratios of AP/PIA glassy transparent films with a uniform structure were obtained. The results of elemental analysis confirmed the composition of the complexes, and FTIR spectroscopy has shown carboxylic and amide peak shifting, indicating complex formation between AP and PIA. Comparison of thermograms of AP/PIA films with different ratios of AP indicated that the increase of the amount of AP increases the thermal stability of the films by retarding the onset of the main degradation processes.

Levels of PAHs in the soils of Belgrade and its environs.

Polycyclic aromatic hydrocarbons (PAHs) were analysed in 39 soil samples (0-10 cm upper layer) collected in Belgrade, the capital of Serbia. The sampling sites were randomly selected from urban, urban/recreational and rural areas; the samples were collected in April and December 2003 and July and October 2004. The sum of the 16 PAHs corresponding to the recreational zone (298 microg/kg) was close to the urban zone (375 microg/kg). Mean soil SigmaPAH concentration from rural areas was 18 microg/kg dry weight. Comparing to values observed in the urbanized locations around the world, the overall levels of PAHs in this study are low. The PAH ratios obtained pointed to a domination of pyrogenically formed PAHs in the examined soils. The dominant PAHs in soil samples in urban zones were fluoranthene, benz[a]anthracene, phenanthrene and pyrene, mostly emitted from noncatalyst vehicles which are still in use in Serbia. The total carcinogenic potency for each sampling site was calculated. Regardless of the used carcinogenic activity factors, carcinogenic potency of 7 sites were 3-9 times higher than the reference ones indicating the increased carcinogenic burden of soils from these sites.