ABSTRACT
Optical beam steering is a key element in many industrial and scientific applications like in material processing, information technologies, medical imaging and laser display. Even though galvanometer-based scanners offer flexibility, speed and accuracy at a relatively low cost, they still lack the necessary control over the polarization required for certain applications. We report on the development of a polarization steerable system assembled with a fiber polarization controller and a galvanometric scanner, both controlled by a digital signal processor board. The system implements control of the polarization decoupled from the pointing direction through a feed-forward control scheme. This enables to direct optical beams to a desired direction without affecting its initial polarization state. When considering the full working field of view, we are able to compensate polarization angle errors larger than 0.2 rad, in a temporal window of less than â¼ 20 ms. Given the unification of components to fully control any polarization state while steering an optical beam, the proposed system is potentially integrable and robust.
Subject(s)
Electronics , Lasers , Refractometry/instrumentation , Equipment Design , Equipment Failure Analysis , FeedbackABSTRACT
Random numbers are essential for applications ranging from secure communications to numerical simulation and quantitative finance. Algorithms can rapidly produce pseudo-random outcomes, series of numbers that mimic most properties of true random numbers while quantum random number generators (QRNGs) exploit intrinsic quantum randomness to produce true random numbers. Single-photon QRNGs are conceptually simple but produce few random bits per detection. In contrast, vacuum fluctuations are a vast resource for QRNGs: they are broad-band and thus can encode many random bits per second. Direct recording of vacuum fluctuations is possible, but requires shot-noise-limited detectors, at the cost of bandwidth. We demonstrate efficient conversion of vacuum fluctuations to true random bits using optical amplification of vacuum and interferometry. Using commercially-available optical components we demonstrate a QRNG at a bit rate of 1.11 Gbps. The proposed scheme has the potential to be extended to 10 Gbps and even up to 100 Gbps by taking advantage of high speed modulation sources and detectors for optical fiber telecommunication devices.
ABSTRACT
A novel integrated optical source capable of emitting faint pulses with different polarization states and with different intensity levels at 100 MHz has been developed. The source relies on a single laser diode followed by four semiconductor optical amplifiers and thin film polarizers, connected through a fiber network. The use of a single laser ensures high level of indistinguishability in time and spectrum of the pulses for the four different polarizations and three different levels of intensity. The applicability of the source is demonstrated in the lab through a free space quantum key distribution experiment which makes use of the decoy state BB84 protocol. We achieved a lower bound secure key rate of the order of 3.64 Mbps and a quantum bit error ratio as low as 1.14×10⻲ while the lower bound secure key rate became 187 bps for an equivalent attenuation of 35 dB. To our knowledge, this is the fastest polarization encoded QKD system which has been reported so far. The performance, reduced size, low power consumption and the fact that the components used can be space qualified make the source particularly suitable for secure satellite communication.
Subject(s)
Amplifiers, Electronic , Fiber Optic Technology/instrumentation , Lasers, Solid-State , Lighting/instrumentation , Refractometry/instrumentation , Security Measures , Computer-Aided Design , Equipment Design , Equipment Failure AnalysisABSTRACT
We experimentally and numerically tested the separability of two independent equally luminous monochromatic and white light sources at the diffraction limit, using optical vortices (OV). The diffraction pattern of one of the two sources crosses a fork hologram on its center generating the Laguerre-Gaussian (LG) transform of an Airy disk. The second source, crossing the fork hologram in positions different from the optical center, generates nonsymmetric LG patterns. We formulated a criterion, based on the asymmetric intensity distribution of the superposed LG patterns so created, to resolve the two sources at angular distances much below the Rayleigh criterion. Analogous experiments in white light allow angular resolutions which are still one order of magnitude below the Rayleigh criterion. The use of OVs might offer new applications for stellar separation in future space experiments.