Comparative Study of Exsolved and Impregnated Ni Nanoparticles Supported on Nanoporous Perovskites for Low-Temperature CO Oxidation.

This study investigated the redox exsolution of Ni nanoparticles from a nanoporous La0.52Sr0.28Ti0.94Ni0.06O3 perovskite. The characteristics of exsolved Ni nanoparticles including their size, population, and surface concentration were deeply analyzed by environmental scanning electron microscopy (ESEM), transmission electron microscopy-energy dispersive X-ray spectroscopy (TEM-EDX) mapping, and hydrogen temperature-programmed reduction (H2-TPR). Ni exsolution was triggered in hydrogen as early as 400 °C, with the highest catalytic activity for low-temperature CO oxidation achieved after a reduction step at 500 °C, despite only a 10% fraction of Ni exsolved. The activity and stability of exsolved nanoparticles were compared with their impregnated counterparts on a perovskite material with a similar chemical composition (La0.65Sr0.35TiO3) and a comparable specific surface area and Ni loading. After an aging step at 800 °C, the catalytic activity of exsolved Ni nanoparticles at 300 °C was found to be 10 times higher than that of impregnated ones, emphasizing the thermal stability of Ni nanoparticles prepared by redox exsolution.

Climbing the Hydrogen Evolution Volcano with a NiTi Shape Memory Alloy.

Alkaline water electrolysis is a sustainable way to produce green hydrogen using renewable electricity. Even though the rates of the cathodic hydrogen evolution reaction (HER) are 2-3 orders of magnitude less under alkaline conditions than under acidic conditions, the possibility of using non-precious metal catalysts makes alkaline HER appealing. We identify a novel and facile route for substantially improving HER performance via the use of commercially available NiTi shape memory alloys, which upon heating undergo a phase transformation from the monoclinic martensite to the cubic austenite structure. While the room-temperature performance is modest, austenitic NiTi outperforms Pt (which is the state-of-the-art HER electrocatalyst) in terms of current density by ≤50% at 80 °C. Surface ensembles presented by the austenite phase are computed with density functional theory to bind hydrogen more weakly than either metallic Ni or Ti and to have binding energies ideally suited for HER.

Brownmillerites CaFeO2.5 and SrFeO2.5 as Catalyst Support for CO Oxidation.

The support material can play an important role in oxidation catalysis, notably for CO oxidation. Here, we study two materials of the Brownmillerite family, CaFeO2.5 and SrFeO2.5, as one example of a stoichiometric phase (CaFeO2.5, CFO) and one existing in different modifications (SrFeO2.75, SrFeO2.875 and SrFeO3, SFO). The two materials are synthesized using two synthesis methods, one bottom-up approach via a complexation route and one top-down method (electric arc fusion), allowing to study the impact of the specific surface area on the oxygen mobility and catalytic performance. CO oxidation on 18O-exchanged materials shows that oxygen from SFO participates in the reaction as soon as the reaction starts, while for CFO, this onset takes place 185 °C after reaction onset. This indicates that the structure of the support material has an impact on the catalytic performance. We report here on significant differences in the catalytic activity linked to long-term stability of CFO and SFO, which is an important parameter not only for possible applications, but equally to better understand the mechanism of the catalytic activity itself.

In Situ Observation of Nanoparticle Exsolution from Perovskite Oxides: From Atomic Scale Mechanistic Insight to Nanostructure Tailoring.

Understanding and controlling the formation of nanoparticles at the surface of functional oxide supports is critical for tuning activity and stability for catalytic and energy conversion applications. Here, we use a latest generation environmental transmission electron microscope to follow the exsolution of individual nanoparticles at the surface of perovskite oxides, with ultrahigh spatial and temporal resolution. Qualitative and quantitative analysis of the data reveals the atomic scale processes that underpin the formation of the socketed, strain-inducing interface that confers exsolved particles their exceptional stability and reactivity. This insight also enabled us to discover that the shape of exsolved particles can be controlled by changing the atmosphere in which exsolution is carried out, and additionally, this could also produce intriguing heterostructures consisting of metal-metal oxide coupled nanoparticles. Our results not only provide insight into the in situ formation of nanoparticles but also demonstrate the tailoring of nanostructures and nanointerfaces.

Atmosphere-dependent stability and mobility of catalytic Pt single atoms and clusters on γ-Al2O3.

Atomically dispersed metals promise the ultimate catalytic efficiency, but their stabilization onto suitable supports remains challenging owing to their aggregation tendency. Focusing on the industrially-relevant Pt/γ-Al2O3 catalyst, in situ X-ray absorption spectroscopy and environmental scanning transmission electron microscopy allow us to monitor the stabilization of Pt single atoms under O2 atmosphere, as well as their aggregation into mobile reduced subnanometric clusters under H2. Density functional theory calculations reveal that oxygen from the gas phase directly contributes to metal-support adhesion, maximal for single Pt atoms, whereas hydrogen only adsorbs on Pt, and thereby leads to Pt clustering. Finally, Pt cluster mobility is shown to be activated at low temperature and high H2 pressure. Our results highlight the crucial importance of the reactive atmosphere on the stability of single-atom versus cluster catalysts.

In situ environmental HRTEM discloses low temperature carbon soot oxidation by ceria-zirconia at the nanoscale.

The very close contact between ceria-zirconia and carbon soot allows the detection of oxygen transfer from ceria-zirconia to carbon by in situ Environmental HRTEM already at low temperatures. This highlights the outstanding redox behavior and soot oxidation potential of ceria-zirconia when suitable carbon-catalyst arrangements are generated at the nanoscale.

Well-defined palladium-ceria interfacial electronic effects trigger CO oxidation.

Metal-support electronic interactions were investigated in CO oxidation by using a Pd/CeO2 model catalyst with well-defined interfaces, and electron transfer from Pd cubes to CeO2 nanorods through interfaces triggered CO oxidation at low temperature where standalone Pd and CeO2 are inert.

Tracking the restructuring of oxidized silver-indium nanoparticles under a reducing atmosphere by environmental HRTEM.

Multimetallic nano-alloys display a structure and consequently physicochemical properties evolving in a reactive environment. Following and understanding this evolution is therefore crucial for future applications in gas sensing and heterogeneous catalysis. In view hereof, the structural evolution of oxidized Ag25In75 bimetallic nanoparticles under varying H2 partial pressures (PH2) and substrate temperatures (Ts) has been investigated in real-time through environmental transmission microscopy (E-TEM) while maintaining the atomic resolution. Small Ag25In75 bimetallic nanoparticles, produced by laser vaporization, are found (after air transfer) to contain an indium-oxide shell surrounding a silver-rich alloyed phase. For high PH2 and Ts, the direct reduction of the indium oxide shell, immediately followed by the melting or the diffusion onto the carbon substrate of the reduced indium atoms, is found to be the dominant mechanism. This reduction is concomitant with the growth of the core, indicating a partial diffusion of indium atoms from the shell towards the particle volume. The "surviving" particles therefore consist of a silver-indium alloy, very stable and remarkably resistant against oxidation contrary to native clusters. Interestingly, in the (PH2, Ts) space, the transition from "soft" (core-shell particles for low (PH2, Ts) values) to "strong" reduction conditions (silver-rich alloys for high (PH2, Ts) products) defines an intermediate domain where the preferred formation of Janus structures is detected. These results are discussed in terms of thermodynamic driving forces in relation to alloying and interface energies. This work shows the potential of high-resolution ETEM for unravelling the mechanisms of nanoparticle reorganization in a chemically reactive environment.

Structural characterization of nanosized CeO(2)-SiO(2), CeO(2)-TiO(2), and CeO(2)-ZrO(2) catalysts by XRD, Raman, and HREM techniques.

Structural characteristics of nanosized ceria-silica, ceria-titania, and ceria-zirconia mixed oxide catalysts have been investigated using X-ray diffraction (XRD), Raman spectroscopy, BET surface area, thermogravimetry, and high-resolution transmission electron microscopy (HREM). The effect of support oxides on the crystal modification of ceria cubic lattice was mainly focused. The investigated oxides were obtained by soft chemical routes with ultrahighly dilute solutions and were subjected to thermal treatments from 773 to 1073 K. The XRD results suggest that the CeO(2)-SiO(2) sample primarily consists of nanocrystalline CeO(2) on the amorphous SiO(2) surface. Both crystalline CeO(2) and TiO(2) anatase phases were noted in the case of CeO(2)-TiO(2) sample. Formation of cubic Ce(0.75)Zr(0.25)O(2) and Ce(0.6)Zr(0.4)O(2) (at 1073 K) were observed in the case of the CeO(2)-ZrO(2) sample. Raman measurements disclose the fluorite structure of ceria and the presence of oxygen vacancies/Ce(3+). The HREM results reveal well-dispersed CeO(2) nanocrystals over the amorphous SiO(2) matrix in the cases of CeO(2)-SiO(2), isolated CeO(2), and TiO(2) (anatase) nanocrystals, some overlapping regions in the case of CeO(2)-TiO(2), and nanosized CeO(2) and Ce-Zr oxides in the case of CeO(2)-ZrO(2) sample. The exact structural features of these crystals as determined by digital diffraction analysis of HREM experimental images reveal that the CeO(2) is mainly in cubic fluorite geometry. The oxygen storage capacity (OSC) as determined by thermogravimetry reveals that the OSC of the mixed oxide systems is more than that of pure CeO(2) and is system dependent.