ABSTRACT
Early detection of cancer is a key ingredient for saving many lives. Unfortunately, cancers of the urogenital system are difficult to detect at early stage. The existing noninvasive diagnostics of prostate cancer (PCa) suffer from low accuracy (< 70%) even at advanced stages. In an attempt to improve the accuracy, a small breath study of 63 volunteers representing three groups: (1) of 19 healthy, (2) 28 with PCa, (3) with 8 kidney cancer (KC) and 8 bladder cancer (BC) was performed. Ultrabroadband mid-infrared Fourier absorption spectroscopy revealed eight spectral ranges (SRs) that differentiate the groups. The resulting accuracies of supervised analyses exceeded 95% for four SRs in distinguishing (1) vs (2), three for (1) vs (3) and four SRs for (1) vs (2) + (3). The SRs were then attributed to volatile metabolites. Their origin and involvement in urogenital carcinogenesis are discussed.
Subject(s)
Biomarkers , Breath Tests/methods , Exhalation , Prostatic Neoplasms/diagnosis , Prostatic Neoplasms/metabolism , Aged , Aged, 80 and over , Breath Tests/standards , Case-Control Studies , Data Analysis , Humans , Male , Middle Aged , Neoplasm Grading , Prognosis , Prostatic Neoplasms/etiology , Spectrum AnalysisABSTRACT
We report a coherent mid-infrared (MIR) source with a combination of broad spectral coverage (6-18 µm), high repetition rate (50 MHz), and high average power (0.5 W). The waveform-stable pulses emerge via intrapulse difference-frequency generation (IPDFG) in a GaSe crystal, driven by a 30-W-average-power train of 32-fs pulses spectrally centered at 2 µm, delivered by a fiber-laser system. Electro-optic sampling (EOS) of the waveform-stable MIR waveforms reveals their single-cycle nature, confirming the excellent phase matching both of IPDFG and of EOS with 2-µm pulses in GaSe.
ABSTRACT
Waveform-stabilized laser pulses have revolutionized the exploration of the electronic structure and dynamics of matter by serving as the technological basis for frequency-comb and attosecond spectroscopy. Their primary sources, mode-locked titanium-doped sapphire lasers and erbium/ytterbium-doped fibre lasers, deliver pulses with several nanojoules energy, which is insufficient for many important applications. Here we present the waveform-stabilized light source that is scalable to microjoule energy levels at the full (megahertz) repetition rate of the laser oscillator. A diode-pumped Kerr-lens-mode-locked Yb:YAG thin-disk laser combined with extracavity pulse compression yields waveform-stabilized few-cycle pulses (7.7 fs, 2.2 cycles) with a pulse energy of 0.15 µJ and an average power of 6 W. The demonstrated concept is scalable to pulse energies of several microjoules and near-gigawatt peak powers. The generation of attosecond pulses at the full repetition rate of the oscillator comes into reach. The presented system could serve as a primary source for frequency combs in the mid infrared and vacuum UV with unprecedented high power levels.
ABSTRACT
Compression of 250-fs, 1-µJ pulses from a KLM Yb:YAG thin-disk oscillator down to 9.1 fs is demonstrated. A kagomé-PCF with a 36-µm core-diameter is used with a pressure gradient from 0 to 40 bar of krypton. Compression to 22 fs is achieved by 1200 fs2 group-delay-dispersion provided by chirped mirrors. By coupling the output into a second kagomé-PCF with a pressure gradient from 0 to 25 bar of argon, octave spanning spectral broadening via the soliton-effect is observed at 18-W average output power. Self-compression to 9.1 fs is measured, with compressibility to 5 fs predicted. Also observed is strong emission in the visible via dispersive wave generation, amounting to 4% of the total output power.
ABSTRACT
Thermal lensing poses a serious challenge for the power scaling of enhancement cavities, in particular when these contain transmissive elements. We demonstrate the compensation of the lensing induced by thermal deformations of the cavity mirrors with the thermal lensing in a thin Brewster plate. Using forced convection to fine-tune the lensing in the plate, we achieve average powers of up to 160 kW for 250-MHz-repetition-rate picosecond pulses with a power-independent mode size. Furthermore, we show that the susceptibility of the cavity mode size to thermal lensing allows highly sensitive absorption measurements.
ABSTRACT
We demonstrate a simple scheme for dual frequency comb spectroscopy in which the second frequency comb is generated by propagating the primary pulse train through a dazzler. The two frequency combs are combined behind a Mach-Zehnder interferometer, and the optical spectrum is read out by an rf-spectrum analyzer. The method is applied to record the overtone absorption spectrum of C2H2 (acetylene) in the wavelength region around 1.03 µm. A spectrum with a resolution of 4 cm(-1) is obtained, which compares well with that from the HITRAN database. A simple method for improving the spectral resolution is demonstrated.
ABSTRACT
We investigate power scaling of ultrashort-pulse enhancement cavities. We propose a model for the sensitivity of a cavity design to thermal deformations of the mirrors due to the high circulating powers. Using this model and optimized cavity mirrors, we demonstrate 400 kW of average power with 250 fs pulses and 670 kW with 10 ps pulses at a central wavelength of 1040 nm and a repetition rate of 250 MHz. These results represent an average power improvement of one order of magnitude compared to state-of-the-art systems with similar pulse durations and will thus benefit numerous applications such as the further scaling of tabletop sources of hard x rays (via Thomson scattering of relativistic electrons) and of soft x rays (via high harmonic generation).
ABSTRACT
As recently revealed, chirped dissipative solitons (DSs) generated in a long cavity fiber laser are subject to action of stimulated Raman scattering (SRS). Here we present theoretical and experimental study of the DS formation and evolution in the presence of strong SRS. The results demonstrate that the rising noisy Raman pulse (RP) acts not only as an additional channel of the energy dissipation destroying DS, but on the contrary can support it that results in formation of a complex of the bound DS and RP of comparable energy and duration. In the complex, the DS affords amplification of the RP, whereas the RP stabilizes the DS via temporal-spectral filtering. Stable 25 nJ SRS-driven chirped DS pulses are generated in all-fiber ring laser cavities with lengths of up to 120 m. The DS with duration up to 70 ps can be externally dechirped to <300 fs thus demonstrating the record compression factor.
ABSTRACT
The dissipative solitons (DS) generated in fiber oscillators with mode-locking mechanism based on nonlinear polarization evolution in a single-mode fiber exhibit stability and energy limits at the cavity lengthening. We demonstrate an alternative approach that enables us to increase the cavity length of the DS oscillator up to 30 m, namely, by the use of a long section of polarization-maintaining (PM) fiber in an all-fiber cavity configuration. We have also identified the next limit of energy scaling related to the onset of Raman conversion of the DS spectrum. The maximum energy of the stable highly chirped DS realized with a 5.5 µm core PM fiber, amounts to ~20 nJ in ~200 fs pulses after a grating compressor. As a next step, energy scaling by means of a fiber core enlargement is discussed.
ABSTRACT
We demonstrate a self-starting Kerr-lens mode-locked (KLM) Yb:YAG thin-disk oscillator operating in the regime of positive intracavity group-delay dispersion (GDD). It delivers 1.7 ps pulses at an average power of 17 W and a repetition rate of 40 MHz. Dispersive mirrors compress the pulses to a duration of 190 fs (assuming sech2 shape; Fourier limit: 150 fs) at an average power level of 11 W. To our knowledge, this is the first KLM thin-disk oscillator with positive GDD. Output powers of up to 30 W were achieved with an increased output coupler transmission and intracavity GDD. We demonstrate increase of the pulse energy with increasing positive intracavity GDD, limited by difficulties in initiating mode-locking.
ABSTRACT
We demonstrate a power-scalable Kerr-lens mode-locked Yb:YAG thin-disk oscillator. It delivers 200 fs pulses at an average power of 17 W and a repetition rate of 40 MHz. At an increased (180 W) pump power level, the laser produces 270 fs 1.1 µJ pulses at an average power of 45 W (optical-to-optical efficiency of 25%). Semiconductor-saturable-absorber-mirror-assisted Kerr-lens mode locking (KLM) and pure KLM with a hard aperture show similar performance. To our knowledge, these are the shortest pulses achieved from a mode-locked Yb:YAG disk oscillator and this is the first demonstration of a Kerr-lens mode-locked thin-disk laser.
ABSTRACT
We demonstrate a simple approach for broadening and compression of intense pulses at megahertz repetition rates by self-phase modulation in nonlinear photonic crystal fibers. In order to avoid damage by self-focusing, we positively chirp the input pulses, which allows coupling of significantly more energy into the fiber, while maintaining the same spectral bandwidth and compression as compared to the Fourier-limited case at lower energy. Using a commercial long-cavity Ti:sapphire oscillator with 55 fs, 400 nJ pulses at 5 MHz, we generate 16 fs, 350 nJ pulses, which is a factor of 4 more energy than possible with unchirped input pulses. Self-phase-modulated spectra supporting 11 fs duration are also shown with 350 nJ pulse energy. Excellent stability is recorded over at least 1 h.
ABSTRACT
We report a novel implementation of chirped-pulse amplification (CPA) by dominantly using dispersive multilayer mirrors for chirp control. Our prototyp dispersive-mirror (DMC) compressor has been designed for a kHz Ti:sapphire amplifier and yielded--in a proof-of-concept study--millijoule-energy, sub-20-fs, 790-nm laser pulses with an overall throughput of approximately 90% and unprecedented spatio-temporal quality. Dispersive-mirror-based CPA permits a dramatic simplification of high-power lasers and affords promise for their advancement to shorter pulse durations, higher peak powers, and higher average powers with user-friendly systems.
ABSTRACT
We report on the development of highly dispersive mirrors for chirped-pulse oscillators (CPO) and amplifiers (CPA). In this proof-of-concept study, we demonstrate the usability of highly dispersive multilayer mirrors for high-energy femtosecond oscillators, namely for i) a chirped-pulse Ti:Sa oscillator and ii) an Yb:YAG disk oscillator. In both cases a group delay dispersion (GDD) of the order of 2x10(4) fs(2) was introduced, accompanied with an overall transmission loss as low as approximately 2 per cent. This unprecedented combination of high dispersion and low loss over a sizeable bandwidth with multilayer structures opens the prospects for femtosecond CPA systems equipped with a compact, alignment-insensitive all-mirror compressors providing compensation of GDD as well as higher-order dispersion.
ABSTRACT
We generated a series of harmonics in a xenon gas jet inside a cavity seeded by pulses from a Ti:sapphire mode-locked laser with a repetition rate of 10.8 MHz. Harmonics up to 19th order at 43 nm were observed with plateau harmonics at the microW power level. An elaborate dispersion compensation scheme and the use of a moderate repetition rate allowed for this significant improvement in output power of the plateau harmonics of 4 orders of magnitude over previous results. With this power level and repetition rate, high-resolution spectroscopy in the extreme ultraviolet region becomes conceivable. An interesting target would be the 1S-2S transition in hydrogenlike He+ at 60 nm.
ABSTRACT
Electrons emit light, carry electric current, and bind atoms together to form molecules. Insight into and control of their atomic-scale motion are the key to understanding the functioning of biological systems, developing efficient sources of x-ray light, and speeding up electronics. Capturing and steering this electron motion require attosecond resolution and control, respectively (1 attosecond = 10(-18) seconds). A recent revolution in technology has afforded these capabilities: Controlled light waves can steer electrons inside and around atoms, marking the birth of lightwave electronics. Isolated attosecond pulses, well reproduced and fully characterized, demonstrate the power of the new technology. Controlled few-cycle light waves and synchronized attosecond pulses constitute its key tools. We review the current state of lightwave electronics and highlight some future directions.
ABSTRACT
We report the first realization, to the best of our knowledge, of a chirped multilayer dielectric mirror providing dispersion control over the spectral range of 300-900 nm and the first use of hafnium oxide in a chirped mirror. The technology opens the door to the reliable and reproducible generation of monocycle laser pulses in the blue-violet spectral range, will benefit the development of optical waveform and frequency-comb synthesizers over the ultraviolet-visible-near-infrared spectral range, and permits the development of ultrabroadband-chirped multilayers for high-power applications.
ABSTRACT
We demonstrate theoretically and experimentally a band filter with two reflection and broadband transmission ranges, which was obtained with standard two-material technology. The fabricated filter has transmission and reflectivity characteristics better than those achievable with rugate technology.
ABSTRACT
We demonstrate a chirped dielectric multilayer mirror (CM) with controlled reflectivity and dispersion in the wavelength range 760-840 nm. It exhibits a reflectivity of >99.9% and a mean group delay dispersion (GDD) of about -30 fs(2) with a theoretical GDD ripple of less than 0.5 fs(2) in the working spectral range. Deviations of the measured GDD from the calculated one are restricted to less than +/- 3 fs(2), limited by our measurement system. Simulations reveal that a dispersive delay line composed of 120 bounces off these mirrors introduces negligible distortion to a femtosecond pulse and largely preserves its contrast. The mirrors constitute an ideal tool for precision intracavity or extracavity dispersion control in the range of several thousand fs(2), particularly if pulses with high contrast are to be generated.
ABSTRACT
We demonstrate a Kerr-lens mode-locked Ti:sapphire oscillator that generates 130-nJ, 26-fs and 220-nJ, 30-fs pulses at a repetition rate of 11 MHz. The generation of stable broadband, high-energy pulses from an extended-cavity oscillator is achieved by the use of chirped multilayer mirrors to produce a small net positive dispersion over a broad spectral range. The resultant chirped picosecond pulses are compressed by a dispersive delay line that is external to the laser cavity. The demonstrated peak powers, in excess of 5 MW, are to our knowledge the highest ever achieved from a cw-pumped laser and are expected to be scalable to tens of megawatts by an increase in the pump power and (or) a decrease in the repetition rate. The demonstrated source permits micromachining of any materials under relaxed focusing conditions.
