Polycyclic Aromatic Hydrocarbons Exposure Assessment in a Refractory Brick Production.

In a refractory brick manufacturing company a qualitative and quantitative determination of the sources of occupational exposure to polycyclic aromatic hydrocarbons (PAHs) was obtained in order to validate targeted hygiene measurements. The study included the assessment of PAHs contamination of work surfaces by wipe-sampling, cutaneous exposure by hand washing, contamination of personal protective equipments (gloves) by extraction in solvent, and airborne PAHs concentration in atmospheric samples. Biomonitoring was also carried out by measurement of urinary 1-hydroxypyrene (1-OHPU) in three groups of workers (packaging, production, and controls). The surface contamination sampling was performed in production, packaging, and in other departments (external area) in theory less contaminated by PAHs. Two different areas were identified within the production, one included surfaces that were regularly cleaned (A area) and one included data from non-cleaned surfaces (B area). To confirm the source of exposure, a clear correspondence was observed between the percentage of the single compounds in the binder and those measured in wipes and air samples. As far as the wipes are concerned, the concentrations of phenanthrene, anthracene, fluoranthene, pyrene, benzo(a)pyrene (BaP), and the total PAHs mixture were higher in the B area than the A area of production. The same happened between the A area and the other two departments. According to results of the statistical analysis, these differences were significant. These results were confirmed by the hand washing data and the analysis of PPE. On the other hand, a marked difference does not exist between the packaging department and the external area. In air samples, the differences were much less evident with only higher concentrations of anthracene and total PAHs between production as a whole and the other two departments. Biological monitoring showed 1-OHPU values significantly higher in production workers than in packaging workers. In conclusion, the analysis of the wipes demonstrated that the production B area has a higher surface contamination compared to the production A area and the packaging department. In the absence of a significant difference in air concentrations of PAHs between A and B areas, this is attributable to surfaces not subject to cleaning. Results confirm that the measurement of surface contamination represents a valid tool for the assessment of sources of exposure to PAHs in the workplace.

Determining exhaust fumes exposure in chainsaw operations.

The objective of this study was to investigate the inhalation exposure of forest operators to polycyclic aromatic hydrocarbons (PAHs) and BTEX (benzene, toluene, ethylbenzene and total xylenes) contained in the exhaust fumes released from chainsaws and to suggest possible countermeasures. The study was carried out in four silvicultural treatments (coppice clearcut, conifer thinning, conifer pruning, and sanitary cut), using three types of chainsaw fuel (normal two-stroke petrol mix and two alkylate fuels). Eighty personal air samples were collected; IOM samplers combined with Amberlite XAD-2 sorbent tubes were used for collecting PAHs and Radiello® samplers were used for BTEX. Results indicate that none of the four silvicultural treatments significantly affected the PAHs and BTEX inhalation exposure of forest workers. On the other hand, statistically significant differences were recorded in the inhalation exposure to PAHs and BTEX when using different fuel types. In particular, the inhalation exposure to PAHs and BTEX was generally one order of magnitude lower when using modern alkylate fuels as compared to the traditional oil and lead-free petrol mixture. The small, non-statistically significant differences in inhalation exposure recorded between the two alkylate fuels suggests that the two fuels might be equivalent in terms of quality. Our study indicates that while forest workers are exposed to PAHs and BTEX, the maximum values are generally well below accepted occupational exposure limits.

[Environmental and biological limit values and reference values]. / I valori limite ambientali e biologici e i valori di riferimento.

The application of air quality guidelines and limits for occupational exposure in the workplace are the main tools for risk reduction and prevention of the effects of pollutants on health of the general population and workers respectively. The Biological Reference Values (BRVs), determined in situations of non-occupational exposure, and the Biological Limit Values (BLVs) contribute to the interpretation of biological monitoring data. In the occupational field the comparison with the BRVs should be informative about the existence of exposures greater than the general population and are particularly important for substances without VLBs or whose effects include chronic diseases.

[The role of scientific associations in the definition of occupational limit values]. / Il ruolo delle Società Scientifiche nella definizione dei valori limite.

The definition and compliance with occupational limit values for pollutants in the workplace are the main tool for risk reduction and prevention of possible adverse health effects. There is no doubt that the decisions on the limit values are now closely linked to what produced in the European Community, if not at the international level. However, we believe that Scientific Associations should play a role in proposing and updating the limit values adopted by law in Italy. Become prominent interlocutors of lawmakers and institutional bodies is equally important.

[Dermal exposure and absorption]. / Esposizione e assorbimento cutaneo.

Dermal exposure assessment explores the dynamic interaction between environmental contaminants and the skin. The measure of skin exposure can be made using direct methods (interception techniques, removal techniques from skin, in situ detection) or indirect methods (biological monitoring, removal techniques from surfaces). The selection of the appropriate sampling method will depend on a range of factors (the sampling objectives, the compartment or transport process of interest, the nature of the agent and the analytical methods to be used) and should be part of a coherent and documented sampling strategy. In this work we describe the processes leading to exposure, in relation to the presence of clothing or protective garments, discuss on factors that influence skin penetration (both the physiologic characteristics of the skin and the physico-chemical nature of the compound that comes into contact with the skin) with the purpose to assess and manage the risk of skin exposure.

[The document of chemical risk assessment: experiences in small companies]. / Il documento di valutazione del rischio chimico: esperienze nelle piccole imprese.

Were examined 60 documents of chemical risk assessment of companies from 19 municipalities in the provinces of Siena and Grosseto. The review of evaluations was conducted initially by checking the internal coherence of the documents. What emerged was subsequently analyzed together with the staff who performed the inspection. Although in 12 companies has been declared the presence of carcinogens, in only 5 the evaluation of exposure have been done using measures, others have used models or other techniques. Overall assessment showed that only 8 out of 60 (13.3%) were wrote correctly.

[Working hypothesis of simplified techniques for the first mapping of occupational hazards in handicrafts. Part two: physical and chemical risks]. / Ipotesi di tecniche semplificate per la prima mappatura dei rischi professionali nel settore artigiano. Seconda parte: rischi fisici e chimici.

Craft features a strong link with tradition which preserves and perpetuates techniques created and consolidated over time, in a particular historical, cultural and geographical situation. Italy is home to excellent craftsmanship: fashion, furniture, giftware, design. The framework law for the craft n. 433/1985 defines the craft business carried on by the craftsman for a predominant objective of producing goods, including semi-finished or services. The D.L.gs 81/2008 defines the manner in which the employer must conduct risk assessment in the workplace and process the risk assessment document. The aim of the study is to provide employers with a simple methodology that allows the drafting of the first mapping of hazards/dangers identificating risk sources in the working process. The developed methodology is expressed as a model of information gathering, which brings to a first overview of all major risk indicators that may arise in the craftsmanship.