ABSTRACT
The study presents a novel, one-pot, and scalable solid-state reaction scheme to prepare bismuth sulphide (Bi2S3)-reduced graphene oxide (rGO) nanocomposites using bismuth oxide (Bi2O3), thiourea (TU), and graphene oxide (GO) as starting materials for energy storage applications. The impact of GO loading concentration on the electrochemical performance of the nanocomposites was investigated. The reaction follows a diffusion substitution pathway, gradually transforming Bi2O3 powder into Bi2S3 nanostrips, concurrently converting GO into rGO. Enhanced specific capacitances were observed across all nanocomposite samples, with the Bi2S3@0.2rGO exhibiting the highest specific capacitance of 705 F g-1 at a current density of 1 A g-1 and maintaining a capacitance retention of 82% after 1000 cycles. The superior specific capacitance is attributed to the excellent homogeneity and synergistic relation between rGO and Bi2S3 nanostrips. This methodology holds promise for extending the synthesis of other chalcogenides-rGO nanocomposites.
ABSTRACT
In this report, CdS nanoparticles have been grown on the surface of CdWO4 nanorods via an in-situ approach and their high photocatalytic ability toward dye degradation and H2 evolution from H2S splitting under visible light has been demonstrated. The structural and optical properties as well as morphologies with varying amount of CdS to form CdS@CdWO4 have been investigated. Elemental mapping and high resolution transmission electron microscopy (HRTEM) analysis proved the sensitization of CdWO4 nanorods by CdS nanoparticles. A decrease in the PL emission of CdWO4 was observed with increasing amount of CdS nanoparticles loading possibly due to the formation of trap states. Considering the band gap in visible region, the photocatalytic study has been performed for H2 production from H2S and dye degradation under natural sunlight. The steady evolution of H2 was observed from an aqueous H2S solution even without noble metal. Moreover, the rate of photocatalytic H2 evolution over CdS modified CdWO4 is ca. 5.6 times higher than that of sole CdWO4 under visible light. CdS modified CdWO4 showed a good ability toward the photo-degradation of methylene Blue. The rate of dye degradation over CdS modified CdWO4 is ca. 7.4 times higher than that of pristine CdWO4 under natural sunlight. With increase in amount of CdS nanoparticle loading on CdWO4 nanorods the hydrogen generation was observed to be decreased where as dye degradation rate is increased. Such nano-heterostructures may have potential in other photocatalytic reactions.
ABSTRACT
We have demonstrated unique CdS0.5Se0.5 and CdSe quantum dot-glass nanosystems with quantum confinement effect. The stable, monodispersed CdS0.5Se0.5 and CdSe quantum dots (QDs) of size 2 to 12 nm have been grown in a germanate glass matrix by a simple melt quench technique at moderate temperature. XRD and Raman studies show formation of hexagonal CdS0.5Se0.5 and CdSe in the glass matrix. The quantum confinement of CdS0.5Se0.5 and CdSe was studied using TEM and UV-Vis spectroscopy. The band gap of the glass nanosystem was tuned from 3.6 to 1.8 eV by controlling the CdS0.5Se0.5 quantum dot size in the glass matrix. It can be further tuned to 1.68 eV using growth of CdSe quantum dots in the glass matrix. Considering the tuneable band gap of the CdS0.5Se0.5 and CdSe quantum dot-glass nanosystem for the visible light absorption, a study of size tuneable photocatalytic activity for hydrogen generation from hydrogen sulfide splitting was performed under visible light irradiation for the first time. The utmost hydrogen evolution, i.e. 8164.53 and 7257.36 µmol h(-1) g(-1) was obtained for the CdS0.5Se0.5 and CdSe quantum dot-glass nanosystems, respectively. The apparent quantum yield (AQY) was observed to be 26% and 21% for the CdS0.5Se0.5 and CdSe quantum dot-glass nanosystems, respectively. It is noteworthy that the present glass nanosystem as a photocatalyst was found to be very stable as compared to naked powder photocatalysts.
ABSTRACT
We have demonstrated a template-free large-scale synthesis of nanostructured Cd(x)Zn(1-x)S by a simple and a low-temperature solid-state method. Cadmium oxide, zinc oxide, and thiourea in various concentration ratios are homogenized at moderate temperature to obtain nanostructured Cd(x)Zn(1-x)S. We have also demonstrated that phase purity of the sample can be controlled with a simple adjustment of the amount of Zn content and nanocrystalline Cd(x)Zn(1-x)S(x = 0.5 and 0.9) of the hexagonal phase with 6-8 nm sized and 4-5 nm sized Cd(0.1)Zn(0.9)S of cubic phase can be easily obtained using this simple approach. UV-vis and PL spectrum indicate that the optical properties of as synthesized nanostructures can also be modulated by tuning their compositions. Considering the band gap of the nanostructured Cd(x)Zn(1-x)S well within the visible region, the photocatalytic activity for H2 generation using H2S and methylene blue dye degradation is performed under visible-light irradiation. The maximum H2 evolution of 8320 µmol h(-1)g(-1) is obtained using nanostructured Cd(0.1)Zn(0.9)S, which is four times higher than that of bulk CdS (2020 µmol h(-1) g(-1)) and the reported nanostructured CdS (5890 µmol h(-1)g(-1)). As synthesized Cd(0.9)Zn(0.1)S shows 2-fold enhancement in degradation of methylene blue as compared to the bulk CdS. It is noteworthy that the synthesis method adapted provides an easy, inexpensive, and pollution-free way to synthesize very tiny nanoparticles of Cd(x)Zn(1-x)S with a tunnable band structure on a large scale, which is quite difficult to obtain by other methods. More significantly, environmental benign enhanced H2 production from hazardous H2S using Cd(x)Zn(1-x)S is demonstrated for the first time.
Subject(s)
Cadmium Compounds/chemistry , Hydrogen/chemistry , Nanostructures/chemistry , Selenium Compounds/chemistry , Sunlight , Zinc Compounds/chemistryABSTRACT
The simple, template-free, low-temperature, large-scale synthesis of nanostructured CdS with the hexagonal wurtzite phase from bulk cadmium oxide under solid-phase conditions is demonstrated for the first time. The novel approach involves the homogenization of cadmium oxide (CdO) and thiourea in various stoichiometric ratios at moderate temperature. Among the different molar ratios of CdO and thiourea studied, the CdO/NH(2) CSNH(2) molar ratio of 1:2 is found to be the best to obtain highly pure CdS. The obtained CdS nanostructures exhibit excellent cubic morphology and high specific surface area with a particle size in the range of 5-7 nm. The bandgap of the nanostructured CdS is in the range of 2.42 to 2.46 eV due to its nanocrystalline nature. In photoluminescence studies, emission is observed at 520.34 and 536.42 nm, which is characteristic of the greenish-yellow region of the visible spectrum. Considering the bandgap of the CdS is within the visible region, the photocatalytic activity for H(2) generation and organic dye degradation are performed under visible-light irradiation. The maximum H(2) evolution of 2945 µmol h(-1) is obtained using nanostructured CdS prepared in the 1:2 ratio, which is three times higher than that of bulk CdS (1010 µmol h(-1) ). CdS synthesized using the 1:2 molar ratio shows maximum methylene blue degradation (87.5%) over a period of 60 min, which is approximately four times higher than that of bulk CdS (22%). This amazing performance of the material is due to its nanocrystalline nature and the high surface area of the CdS. The proposed simple methodology is believed to be a significant breakthrough in the field of nanotechnology, and the method can be further generalized as a rational preparation scheme for the large-scale synthesis of various other nanostructured metal sulfides.
