ABSTRACT
In this report, we propose the closed pack array of gold discs on glass, as a dual mode plasmonic tweezers that benefits from two trapping modes. The first trapping mode is based on leaky surface plasmon mode (LSPM) on the gold discs with a longer penetration depth in the water and a longer spatial trapping range, so that target nanoparticles with a radius of 100 nm can be attracted toward the gold surface from a vertical distance of about 2 µm. This trapping mode can help to overcome the inherent short range trapping challenge in the plasmonic tweezers. The second trapping mode is based on the dimer surface plasmonic mode (DSPM) in the nano-slits between the neighboring gold discs, leading to isolated and strong trapping sites for nanoparticles smaller than 34 nm. The proposed plasmonic tweezers can be excited in both LSPM and DSPM modes by switching the incident wavelength, resulting in promising and complementary functionalities. In the proposed plasmonic tweezers, we can attract the target particles towards the gold surface by LSPM gradient force, and trap them within a wide half width half maximum (HWHM) that allows studying the interactions between the trapped particles, due to their spatial proximity. Then, by switching to the DSPM trapping mode, we can rearrange the particles in a periodic pattern of isolated and stiff traps. The proposed plasmonic structure and the presented study opens a new insight for realizing efficient, dual-mode tweezers with complementary characteristics, suitable for manipulation of nanoparticles. Our thermal simulations demonstrate that the thermal-induced forces does not interefe with the proposed plasmonic tweezing.
ABSTRACT
In this report, gold cauldrons are proposed and proved as efficient candidates for plasmonic tweezers. Gold cauldrons benefit from high field localization in the vicinity of their apertures, leading to particle trapping by a reasonably low power source. The plasmonic trapping capability of a single gold cauldron and a cauldrons cluster are studied by investigating the plasmon-induced variations of the optical trap stiffness in a conventional optical tweezers configuration. This study shows that the localized plasmonic fields and the consequent plasmonic forces lead to enhanced trap stiffness in the vicinity of the cauldrons. This observation is pronounced for the cauldrons cluster, due to the additive plasmonic fields of the neighboring cauldrons. Strong direct plasmonic tweezing by the gold cauldrons cluster is also investigated and confirmed by our simulations and experimental results. In addition to the presented plasmonic trapping behavior, gold cauldrons benefit from a low cost and simple fabrication process with acceptable controllability over the structural average dimensions and plasmonic behavior, making them attractive for emerging lab-on-a-chip optophoresis applications.
