Membrane Manipulation of Giant Unilamellar Polymer Vesicles with a Temperature-Responsive Polymer.

Understanding the complex behavior and dynamics of cellular membranes is integral to gain insight into cellular division and fusion processes. Bottom-up synthetic cells are as a platform for replicating and probing cellular behavior. Giant polymer vesicles are more robust than liposomal counterparts, as well as having a broad range of chemical functionalities. However, the stability of the membrane can prohibit dynamic processes such as membrane phase separation and division. Here, we present a method for manipulating the membrane of giant polymersomes using a temperature responsive polymer. Upon elevation of temperature deformation and phase separation of the membrane was observed. Upon cooling, the membrane relaxed and became homogeneous again, with infrequent division of the synthetic cells.

Biopolymer-based nanocarriers for sustained release of agrochemicals: A review on materials and social science perspectives for a sustainable future of agri- and horticulture.

Devastating plant diseases and soil depletion rationalize an extensive use of agrochemicals to secure the food production worldwide. The sustained release of fertilizers and pesticides in agriculture is a promising solution to the eco-toxicological impacts and it might reduce the amount and increase the effectiveness of agrochemicals administration in the field. This review article focusses on carriers with diameters below 1 µm, such as capsules, spheres, tubes and micelles that promote the sustained release of actives. Biopolymer nanocarriers represent a potentially environmentally friendly alternative due to their renewable origin and biodegradability, which prevents the formation of microplastics. The social aspects, economic potential, and success of commercialization of biopolymer based nanocarriers are influenced by the controversial nature of nanotechnology and depend on the use case. Nanotechnology's enormous innovative power is only able to unfold its potential to limit the effects of climate change and to counteract current environmental developments if the perceived risks are understood and mitigated.

Cellulose nanocarriers via miniemulsion allow Pathogen-Specific agrochemical delivery.

The current spraying of agrochemicals is unselective and ineffective, consuming a high amount of fungicides, which endangers the environment and human health. Cellulose-based nanocarriers (NCs) are a promising tool in sustainable agriculture and suitable vehicles for stimuli-responsive release of agrochemicals to target cellulase-segregating fungi, which cause severe plant diseases such as Apple Canker. Herein, cellulose was modified with undec-10-enoic acid to a hydrophobic and cross-linkable derivative, from which NCs were prepared via thiol-ene addition in miniemulsion. During the crosslinking reaction, the NCs were loaded in situ with hydrophobic fungicides, Captan and Pyraclostrobin. NCs with average sizes ranging from 200 to 300 nm and an agrochemical-load of 20 wt% were obtained. Cellulose-degrading fungi, e.g. Neonectria. ditissima which is responsible for Apple Canker, lead to the release of fungicides from the aqueous NC dispersions suppressing fungal growth. In contrast, the non-cellulase segregating fungi, e.g. Cylindrocladium buxicola, do not degrade the agrochemical-loaded NCs. This selective action against Apple Canker fungi, N. ditissima, proves the efficacy of NC-mediated drug delivery triggered by degradation in the exclusive presence of cellulolytic fungi. Cellulose NCs represent a sustainable alternative to the current unselective spraying of agrochemicals that treats many crop diseases ineffectively.

Bio-Based Lignin Nanocarriers Loaded with Fungicides as a Versatile Platform for Drug Delivery in Plants.

Lignin-based nano- and microcarriers are a promising biodegradable drug delivery platform inside of plants. Many wood-decaying fungi are capable of degrading the wood component lignin by segregated lignases. These fungi are responsible for severe financial damage in agriculture, and many of these plant diseases cannot be treated today. However, enzymatic degradation is also an attractive handle to achieve a controlled release of drugs from artificial lignin vehicles. Herein, chemically cross-linked lignin nanocarriers (NCs) were prepared by aza-Michael addition in miniemulsion, followed by solvent evaporation. The cross-linking of lignin was achieved with the bio-based amines (spermine and spermidine). Several fungicides-namely, azoxystrobin, pyraclostrobin, tebuconazole, and boscalid-were encapsulated in situ during the miniemulsion polymerization, demonstrating the versatility of the method. Lignin NCs with diameters of 200-300 nm (determined by dynamic light scattering) were obtained, with high encapsulation efficiencies (70-99%, depending on the drug solubility). Lignin NCs successfully inhibited the growth of Phaeomoniella chlamydospora and Phaeoacremonium minimum, which are lignase-producing fungi associated with the worldwide occurring fungal grapevine trunk disease Esca. In planta studies proved their efficiency for at least 4 years after a single injection into Vitis vinifera ("Portugieser") plants on a test vineyard in Germany. The lignin NCs are of high interest as biodegradable delivery vehicles to be applied by trunk injection against the devastating fungal disease Esca but might also be promising against other fungal plant diseases.

Crosslinking of Electrospun Fibres from Unsaturated Polyesters by Bis-Triazolinediones (TAD).

Crosslinking of an unsaturated aliphatic polyester poly(globalide) (PGl) by bistriazolinediones (bisTADs) is reported. First, a monofunctional model compound, phenyl-TAD (PTAD), was tested for PGl functionalisation. 1H-NMR showed that PTAD-ene reaction was highly efficient with conversions up to 97%. Subsequently, hexamethylene bisTAD (HM-bisTAD) and methylene diphenyl bisTAD (MDP-bisTAD) were used to crosslink electrospun PGl fibres via one- and two-step approaches. In the one-step approach, PGl fibres were collected in a bisTAD solution for in situ crosslinking, which resulted in incomplete crosslinking. In the two-step approach, a light crosslinking of fibres was first achieved in a PGl non-solvent. Subsequent incubation in a fibre swelling bisTAD solution resulted in fully amorphous crosslinked fibres. SEM analysis revealed that the fibres' morphology was uncompromised by the crosslinking. A significant increase of tensile strength from 0.3 ± 0.08 MPa to 2.7 ± 0.8 MPa and 3.9 ± 0.5 MPa was observed when PGI fibres were crosslinked by HM-bisTAD and MDP-bisTAD, respectively. The reported methodology allows the design of electrospun fibres from biocompatible polyesters and the modulation of their mechanical and thermal properties. It also opens future opportunities for drug delivery applications by selected drug loading.

Covalently Binding of Bovine Serum Albumin to Unsaturated Poly(Globalide-Co-ε-Caprolactone) Nanoparticles by Thiol-Ene Reactions.

When nanoparticles (NPs) are introduced to a biological fluid, different proteins (and other biomolecules) rapidly get adsorbed onto their surface, forming a protein corona capable of giving to the NPs a new "identity" and determine their biological fate. Protein-nanoparticle conjugation can be used in order to promote specific interactions between living systems and nanocarriers. Non-covalent conjugates are less stable and more susceptible to desorption in biological media, which makes the development of engineered nanoparticle surfaces by covalent attachment an interesting topic. In this work, the surface of poly(globalide-co-ε-caprolactone) (PGlCL) nanoparticles containing double bonds in the main polymer chain is covalently functionalized with bovine serum albumin (BSA) by thiol-ene chemistry, producing conjugates which are resistant to dissociation. The successful formation of the covalent conjugates is confirmed by flow cytometry (FC) and fluorescence correlation spectroscopy (FCS). Transmission electron microscopy (TEM) allows the visualization of the conjugate formation, and the presence of a protein layer surrounding the NPs can be observed. After conjugation with BSA, NPs present reduced cell uptake by HeLa and macrophage RAW264.7 cells, in comparison to uncoated NP. These results demonstrate that it is possible to produce stable conjugates by covalently binding BSA to PGlCL NP through thiol-ene reaction.

Diethyldithiocarbamate loaded in beeswax-copaiba oil nanoparticles obtained by solventless double emulsion technique promote promastigote death in vitro.

Leishmaniasis is considered a neglected tropical disease that represents a Public Health problem due to its high incidence. In the search of new alternatives for Leishmaniasis treatment diethyldithiocarbamate (DETC) has shown an excellent leishmanicidal activity and the incorporation into drug carrier systems, such as solid lipid nanoparticles (SLNs), is very promising. In the present work DETC loaded in beeswax nanoparticles containing copaiba oil were obtained by the double emulsion/melt technique. The nanoparticles were characterized and leishmanicidal activity against L. amazonensis promastigotes forms and cytotoxicity in murine macrophages were evaluated. SLNs presented size below 200 nm, spherical morphology, negative charge surface, high encapsulation efficiency, above 80%, and excellent stability. Moreover, Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) analyses were performed to evaluate the chemical structure and possible interactions between DETC and SLNs. SLNs provided a protection for DETC, decreasing its cytotoxic effects in macrophages, which led to an improvement in the selectivity against the parasites, which almost doubled from free DETC (11.4) to DETC incorporated in SLNs (18.2). These results demonstrated that SLNs had a direct effect on L. amazonensis promastigotes without affect the viability of macrophage cell, can be a promising alternative therapy for the cutaneous treatment of L. amazonensis.

N-acetylcysteine side-chain functionalization of poly(globalide-co-ε-caprolactone) through thiol-ene reaction.

N-Acetylcysteine (NAC) is a drug well known for its antimucolytic action, antioxidant activity and ability to protect cells from oxidative stress. Conjugation of NAC with double bonds in the main polymer chain of poly(globalide-co-ε-caprolactone) (PGlCL) through thiol-ene reaction is reported. Different globalide (Gl) (an unsaturated macrolactone) to ε-caprolactone (CL) ratios were employed for PGlCL synthesis. The polymeric materials (PGlCL-NAC) were evaluated in terms of the number of functionalized double bonds, thermal properties, affinity for water and antioxidant potential. PGlCL-NAC containing more globalide repeating units presented higher degree of functionalization, due to the higher number of double bonds available to react through thiol-ene coupling. For high globalide contents (Gl/CL ratios above 50/50), NAC coupling in PGlCL chains resulted in completely amorphous copolymers with a more hydrophilic character, which should enhance bioresorption and cell adhesion characteristics. Functionalization also gave rise to a thioether linkage, conferring to PGlCL-NAC an antioxidant character, important for biomedical applications, where the material could combat cellular oxidative-stress.

Synthesis of a green polyurethane foam from a biopolyol obtained by enzymatic glycerolysis and its use for immobilization of lipase NS-40116.

The use of green sources for materials synthesis has gained popularity in recent years. This work investigated the immobilization of lipase NS-40116 (Thermomyces lanuginosus lipase) in polyurethane foam (PUF) using a biopolyol obtained through the enzymatic glycerolysis between castor oil and glycerol, catalyzed by the commercial lipase Novozym 435 for the PUF formation. The reaction was performed to obtain biopolyol resulting in the conversion of 64% in mono- and diacylglycerol, promoting the efficient use of the reaction product as biopolyol to obtain polyurethane foam. The enzymatic derivative with immobilized lipase NS-40116 presented apparent density of 0.19 ± 0.03 g/cm3 and an immobilization yield was 94 ± 4%. Free and immobilized lipase NS-40116 were characterized in different solvents (methanol, ethanol, and propanol), temperatures (20, 40, 60 and 80 °C), pH (3, 5, 7, 9 and 11) and presence of ions Na+, Mg++, and Ca++. The support provided higher stability to the enzyme, mainly when subjected to acid pH (free lipase lost 80% of relative activity after 360 h of contact, when the enzymatic derivative lost around 22%) and high-temperature free lipase lost 50% of relative activity, while the immobilized remained 95%. The enzymatic derivative was also used for esterification reactions and conversions around 66% in fatty acid methyl esters, using abdominal chicken fat as feedstock, were obtained in the first use, maintaining this high conversion until the fourth reuse, proving that the support obtained using environmentally friendly techniques is applicable.

Thiol-ene miniemulsion polymerization of a biobased monomer for biomedical applications.

Herein, we present the synthesis and characterization of poly(thioether-ester) nanoparticles via thiol-ene miniemulsion polymerization using a biobased α,ω-diene diester monomer, namely dianhydro-d-glucityl diundec-10-enoate (DGU), synthesized from 10-undecenoic acid (derived from castor oil) and isosorbide (derived from starch). DGU was copolymerized with 1,4-butanedithiol by thiol-ene miniemulsion polymerization resulting in waterborne poly(thioether-ester) particles with diameter around 200nm. Polymers with number average molecular weight up to 11kDa were obtained via miniemulsion polymerization. DSC and XRD analyses indicated a semi-crystalline polymer with a degree of crystallinity of at least 20% and Tm around 68°C. In addition, Coumarin 6 was encapsulated in the polymer particles with efficiency up to 98%. Nanoparticles presented biocompatibility in murine fibroblast (L929) and uterine colon cancer (HeLa) cells. The substantial cellular uptake of poly(thioether-ester) nanoparticles by HeLa cells suggests a potential use in uterine colon cancer treatment.

Cellulase immobilization on magnetic nanoparticles encapsulated in polymer nanospheres.

Immobilization of cellulases on magnetic nanoparticles, especially magnetite nanoparticles, has been the main approach studied to make this enzyme, economically and industrially, more attractive. However, magnetite nanoparticles tend to agglomerate, are very reactive and easily oxidized in air, which has strong impact on their useful life. Thus, it is very important to provide proper surface coating to avoid the mentioned problems. This study aimed to investigate the immobilization of cellulase on magnetic nanoparticles encapsulated in polymeric nanospheres. The support was characterized in terms of morphology, average diameter, magnetic behavior and thermal decomposition analyses. The polymer nanospheres containing encapsulated magnetic nanoparticles showed superparamagnetic behavior and intensity average diameter about 150 nm. Immobilized cellulase exhibited broader temperature stability than in the free form and great reusability capacity, 69% of the initial enzyme activity was maintained after eight cycles of use. The magnetic support showed potential for cellulase immobilization and allowed fast and easy biocatalyst recovery through a single magnet.

Immobilization of Candida antarctica Lipase B on Magnetic Poly(Urea-Urethane) Nanoparticles.

Poly(urea-urethane) (PUU) nanoparticles with encapsulated superparamagnetic magnetite (Fe3O4) were obtained by interfacial miniemulsion polymerization and used as support for immobilization of lipase B from Candida antarctica (CALB). CALB enzyme was immobilized on magnetic PUU nanoparticles in two steps. The enzyme was immobilized in the lyophilized nanoparticles (magnetic PUU) after the support synthesis in phosphate buffer (pH 7.6) containing CALB, by the contact between nanoparticles and enzymatic solution. The mixture was incubated at 30 °C in an orbital shaker during 0.5 until 6 h to determine the time for maximum immobilization efficiency. The enzyme activity was determined by esterification reactions between lauric acid and propanol. Residual activities above 95 % in relation to free enzyme were obtained in 1 h of immobilization with enzyme concentration of 0.55 mg/mL. FTIR spectrum and SEM-FEG images were used to confirm the presence of CALB on magnetic support after immobilization and stability of support even after immobilization process, respectively. Thermal (40, 60, and 80 °C) and pH (pH 4, 7, and 10) stabilities, storage stability, and reuse were evaluated. CALB immobilized derivatives showed high stabilities with residual activities of 95, 100, and 100 % at 40, 60, and 80 °C, respectively, in 6 h of incubation. After incubation in different pH values, CALB immobilized derivative presented activities of 81, 76, and 69 % in relation to activities in the beginning of the stabilization process in pH 4, 7, and 10, respectively. Furthermore, CALB immobilized derivative reduces only 15 % of its activity after 30 days of storage at 4 °C. Reuse results showed that immobilized CALB on magnetic PUU nanoparticles led to 95 % of geranyl oleate conversion after 8 cycles of application demonstrating high stability of the CALB immobilized derivative under different conditions.

Synthesis of PEG-PCL-based polyurethane nanoparticles by miniemulsion polymerization.

In this work biocompatible polyurethane nanoparticles for future application as noninvasive polymeric nanocarriers using propellant-based inhalers in the treatment of respiratory diseases were prepared by miniemulsion interfacial polymerization derived from isophorone diisocyanate, poly(ϵ-caprolactone), and poly(ethylene glycol). The effects of the surfactant type, nonionic Tween 80 and Brij 35, anionic sodium dodecyl sulfate, and cationic cetyltrimethyl ammonium bromide, and poly(ethylene glycol) molar mass on the stability, size and morphology of nanoparticles were evaluated. In addition, the ability of cells to proliferate in contact with polyurethane nanoparticles was assessed by MTS ([(3-(4,5-dimethylthiazole-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfo-phenyl)-2H-tetrazolium, inner salt]) assay using human lung adenocarcinoma A549 cells, an in vitro model of Type II alveolar epithelium.

Kinetic study of Candida antarctica lipase B immobilization using poly(methyl methacrylate) nanoparticles obtained by miniemulsion polymerization as support.

With the objective to obtain immobilized Candida antarctica lipase B (CalB) with good activity and improved utilization rate, this study evaluated the influence of enzyme and crodamol concentrations and initiator type on the CalB enzyme immobilization in nanoparticles consisting of poly(methyl methacrylate) (PMMA) obtained by miniemulsion polymerization. The kinetic study of immobilized CalB enzyme in PMMA nanoparticles was evaluated in terms of monomer conversion, particle size, zeta potential, and relative activity. The optimum immobilization condition for CalB was compared with free enzyme in the p-NPL hydrolysis activity measurement. Results showed a higher CalB enzyme stability after 20 hydrolysis cycles compared with free CalB enzyme; in particular, the relative immobilized enzyme activity was maintained up to 40%. In conclusion, PMMA nanoparticles proved to be a good support for the CalB enzyme immobilization and may be used as a feasible alternative catalyst in industrial processes.

BSA adsorption on differently charged polystyrene nanoparticles using isothermal titration calorimetry and the influence on cellular uptake.

BSA adsorption onto negatively and positively charged polystyrene nanoparticles was investigated. The nanoparticles were characterized in terms of particle size, zeta potential, surface group density, and morphology. The adsorption behavior of BSA on the particle surface, as a function of pH and overall charge of the particle, was studied using ITC. Different thermodynamic data such as enthalpy changes upon binding and stoichiometry of the systems were determined and discussed. The degree of surface coverage with BSA was calculated using the thermodynamic data. The cellular uptake of particles before and after BSA adsorption was studied using HeLa cells in the presence and absence of supplemented FCS in the cell culture medium.

Nanoencapsulation of quercetin via miniemulsion polymerization.

The nanoencapsulation of quercetin, a strong antioxidant and radical scavenger, via methyl methacrylate miniemulsion polymerization, using miglyol 812 as costabilizer and lecithin as surfactant was studied and the effect of the monomer/co-stabilizer ratio and different types of initiator, 2,2'azobisisobutyronitrile (AIBN) and redox pair composed of hydrogen peroxide and ascorbic acid, was investigated. Reactions conducted in the presence of quercetin showed lower polymerization rates, indicating that the presence of quercetin inhibits (redox pair) and/or retards (AIBN) the polymerization reaction. The increment of the concentration of ascorbic acid in the reactions initiated by a redox pair resulted in a considerable increase of the reaction rate without influencing other properties as average particle diameter, due to the fact that ascorbic acid acts as a reducing agent minimizing the oxidation of quercetin. Higher quercetin recovery was obtained for nanocapsules when compared with nanospheres.

Spectroscopic on-line monitoring of reactions in dispersed medium: chemometric challenges.

Emulsion and suspension polymerizations are important industrial processes for polymer production. The end-user properties of polymers depend strongly on how the polymerization reactions proceed in time (i.e. a batch or semicontinuous, rate of reagents feeding, etc.). In other words, these reactions are process dependent, which makes the successful process control a key point to ensure high-quality products. In several process control strategies the on-line monitoring of reaction performance is required. Due to the multiphase nature of the emulsion and suspension processes, there is a lack of sensors to perform successful on-line monitoring. Near infrared and Raman spectroscopies have been pointed out as useful approaches for monitoring emulsion and suspension polymerizations and several applications have been described. In such instance, the chemometric approach on relating near infrared and Raman spectra to polymer properties is widely used and has proven to be useful. Nevertheless, the multiphase nature of emulsion and suspension polymerizations also represents a challenge for the chemometric approach based on multivariate calibration models and demands the development of new methods. In this work, a set novel results is presented from the monitoring of 15 batch emulsion reactions that show the chemometric challenge to be faced on development of new methods for successful monitoring of processes taken under dispersed medium. In order to discuss these results, several chemometric approaches were revised. It is shown that Raman and NIR spectroscopic techniques are suitable for on-line monitoring of monomer concentration and polymer content during the polymerizations, as well as medium heterogeneity properties, i.e. average particle size. It is also shown that Hotteling and Q statistics, widely used in chemometrics, might fail in monitoring these reactions, while an approach based on principal curves is able to overcome such restriction.