Water Condensation in the Nanoscale Pores of Pt/C Catalyst Particles and Its Impact on Catalyst Utilization: A Simulation Based on a Reconstructed Structure from Nanoimaging.

In polymer electrolyte membrane fuel cells, carbon-supported platinum (Pt/C) catalyst particles require sufficient water condensation within the nanoscale pores to effectively utilize the interior Pt catalysts. Since experimental visualizations with nanoscale precision of this phenomenon are not yet possible, we utilized a Pt/C catalyst particle reconstructed from segmented nanoimaging of a catalyst powder, which served as the computational domain for lattice density functional theory (LDFT) simulation of water condensation. Paired with experimental water uptake data, LDFT successfully simulated high-resolution water condensation, capturing both thin-film and capillary water condensation phenomena. Using a simple proton movement method within the water network, we reproduced the Pt utilization data from a CO stripping experiment. Our findings highlight that at low relative humidity (RH), Pt utilization is influenced by thin water film formations, mainly dictated by the wettability properties of surfaces within primary pores and the Pt/C catalyst particle's exterior. Conversely, at high RH, Pt utilization is attributed to capillary water condensation in medium-to-large sized pores. This approach contributes a qualitative and quantitative discussion on hypotheses regarding the mechanism of Pt utilization, supporting recent studies (e.g., Girod, R.; Nat. Catal. 2023, 6, (5), 383-391).

Contrast variation method applied to structural evaluation of catalysts by X-ray small-angle scattering.

In the process of developing carbon-supported metal catalysts, determining the catalyst particle-size distribution is an essential step, because this parameter is directly related to the catalytic activities. The particle-size distribution is most effectively determined by small-angle X-ray scattering (SAXS). When metal catalysts are supported by high-performance mesoporous carbon materials, however, their mesopores may lead to erroneous particle-size estimation if the sizes of the catalysts and mesopores are comparable. Here we propose a novel approach to particle-size determination by introducing contrast variation-SAXS (CV-SAXS). In CV-SAXS, a multi-component sample is immersed in an inert solvent with a density equal to that of one of the components, thereby rendering that particular component invisible to X-rays. We used a mixture of tetrabromoethane and dimethyl sulfoxide as a contrast-matching solvent for carbon. As a test sample, we prepared a mixture of a small amount of platinum (Pt) catalyst and a bulk of mesoporous carbon, and subjected it to SAXS measurement in the absence and presence of the solvent. In the absence of the solvent, the estimated Pt particle size was affected by the mesopores, but in the presence of the solvent, the Pt particle size was correctly estimated in spite of the low Pt content. The results demonstrate that the CV-SAXS technique is useful for correctly determining the particle-size distribution for low-Pt-content catalysts, for which demands are increasing to reduce the use of expensive Pt.

High-energy, Long-cycle-life Secondary Battery with Electrochemically Pre-doped Silicon Anode.

Electrochemical pre-doping of a silicon electrode was investigated to create a new class of rechargeable battery with higher energy density. The electrochemical reaction during pre-doping formed a high-quality solid electrolyte interface (SEI) on the surface of silicon particles, which improved the charge and discharge cycle life with a small irreversible capacity. The surface composition of the pre-doped silicon particles was characterized using transmission electron microscopy (TEM), solid state magic-angle-spinning (MAS) nuclear magnetic resonance (NMR) and X-ray diffraction analysis (XRD). Pressurization promoted SEI growth and lithium binding with silicon to form Li15Si4 accompanied by the reductive reaction product of Li2CO3 originated from electrolyte. The Li15Si4 was highly stable when the silicon anode was used in a full cell, thus resulting in a silicon anode with a long cycle life.

Atomic-scale disproportionation in amorphous silicon monoxide.

Solid silicon monoxide is an amorphous material which has been commercialized for many functional applications. However, the amorphous structure of silicon monoxide is a long-standing question because of the uncommon valence state of silicon in the oxide. It has been deduced that amorphous silicon monoxide undergoes an unusual disproportionation by forming silicon- and silicon-dioxide-like regions. Nevertheless, the direct experimental observation is still missing. Here we report the amorphous structure characterized by angstrom-beam electron diffraction, supplemented by synchrotron X-ray scattering and computer simulations. In addition to the theoretically predicted amorphous silicon and silicon-dioxide clusters, suboxide-type tetrahedral coordinates are detected by angstrom-beam electron diffraction at silicon/silicon-dioxide interfaces, which provides compelling experimental evidence on the atomic-scale disproportionation of amorphous silicon monoxide. Eventually we develop a heterostructure model of the disproportionated silicon monoxide which well explains the distinctive structure and properties of the amorphous material.