Production of solid acid catalyst using waste cigarette filters for esterification.

Cigarette filters were utilized as carbon source for the production of solid carbon acid catalysts. In this study, the process of carbonization and simultaneous sulfonation via hydrothermal treatment was employed. The catalysts were prepared by mixing cigarette filters and sulfuric acid at temperatures of 100, 150, and 190 °C for durations ranging from 2 to 8 h. It was observed that the highest conversion of oleic acid occurred when the catalyst was synthesized at 190 °C for 4 h. The optimized conditions for the esterification reaction using this catalyst included an oleic acid to methanol molar ratio of 1:12, a catalyst loading of 5 wt%, and a temperature of 100 °C for 1 h. Additionally, the catalyst was successfully reused four times without significantly impacting the reaction yield. These findings highlight a promising approach for the utilization of waste materials, with immediate implications for waste management practices and positive environmental impacts.

Key parameters to enhance the antibacterial effect of graphene oxide in solution.

Graphene oxide (GO) has lately become an interesting biomaterial due to its stunning properties and versatility, its claimed antimicrobial activity holds promise for potential health applications. Nonetheless, multiple reports investigating GO antibacterial activity lack rigor and uniformity on several aspects which are crucial when evaluating this effect. In this work, we highlight and address these parameters: morphology of the materials, exposure time, exposure methodology and concentration. We investigate the effect of GO and GO-based metallic composites observing these parameters on two pathogenic bacteria. Our nanomaterials have been characterized by means of SEM, EDX, DLS, FTIR and Raman spectroscopies. Escherichia coli and Salmonella Typhimurium suspended in saline solutions (no growth medium) have been exposed to GO (lateral size = 100 nm), silver nanoparticles, ceria nanoparticles, GO/silver and GO/ceria aqueous solutions for 0, 5, 15, 30, 60 and 90 minutes, before plating. Our experiments indicate that no prior exposure of the materials to bacteria (0 min) results in poor inactivation rates independently of concentration, while increasing times of interaction enhance inactivation. Moreover, our experiments show concentration-dependent results showing higher activity for concentrations of 100 µg mL-1; and prove that 30 minutes of exposure are sufficient to deploy the antimicrobial effects of these materials. GO possesses the lowest inactivation rate, and the presence of silver and ceria nanoparticles in the GO surface boosts its antimicrobial effect. Thus, the enhancement of the antibacterial activity of graphene oxide relies on 30 minutes of interaction in water, concentration of 100 µg mL-1, and its decoration by silver/ceria nanoparticles.

Copper Nanocrystals Encapsulated in Zr-based Metal-Organic Frameworks for Highly Selective CO2 Hydrogenation to Methanol.

We show that the activity and selectivity of Cu catalyst can be promoted by a Zr-based metal-organic framework (MOF), Zr6O4(OH)4(BDC)6 (BDC = 1,4-benzenedicarboxylate), UiO-66, to have a strong interaction with Zr oxide [Zr6O4(OH)4(-CO2)12] secondary building units (SBUs) of the MOF for CO2 hydrogenation to methanol. These interesting features are achieved by a catalyst composed of 18 nm single Cu nanocrystal (NC) encapsulated within single crystal UiO-66 (Cu⊂UiO-66). The performance of this catalyst construct exceeds the benchmark Cu/ZnO/Al2O3 catalyst and gives a steady 8-fold enhanced yield and 100% selectivity for methanol. The X-ray photoelectron spectroscopy data obtained on the surface of the catalyst show that Zr 3d binding energy is shifted toward lower oxidation state in the presence of Cu NC, suggesting that there is a strong interaction between Cu NC and Zr oxide SBUs of the MOF to make a highly active Cu catalyst.

Versailles Project on Advanced Materials and Standards Interlaboratory Study on Measuring the Thickness and Chemistry of Nanoparticle Coatings Using XPS and LEIS.

We report the results of a VAMAS (Versailles Project on Advanced Materials and Standards) inter-laboratory study on the measurement of the shell thickness and chemistry of nanoparticle coatings. Peptide-coated gold particles were supplied to laboratories in two forms: a colloidal suspension in pure water and; particles dried onto a silicon wafer. Participants prepared and analyzed these samples using either X-ray photoelectron spectroscopy (XPS) or low energy ion scattering (LEIS). Careful data analysis revealed some significant sources of discrepancy, particularly for XPS. Degradation during transportation, storage or sample preparation resulted in a variability in thickness of 53 %. The calculation method chosen by XPS participants contributed a variability of 67 %. However, variability of 12 % was achieved for the samples deposited using a single method and by choosing photoelectron peaks that were not adversely affected by instrumental transmission effects. The study identified a need for more consistency in instrumental transmission functions and relative sensitivity factors, since this contributed a variability of 33 %. The results from the LEIS participants were more consistent, with variability of less than 10 % in thickness and this is mostly due to a common method of data analysis. The calculation was performed using a model developed for uniform, flat films and some participants employed a correction factor to account for the sample geometry, which appears warranted based upon a simulation of LEIS data from one of the participants and comparison to the XPS results.

Effect of graphene oxide on bacteria and peripheral blood mononuclear cells.

BACKGROUND: Driven by the potential biological applications of graphene, many groups have studied the response of cells exposed to graphene oxide (GO). In particular, investigations of bacteria indicate that there are 2 crucial parameters, which so far have only been investigated separately: GO size and exposure methodology. Our study took into account both parameters. We carefully characterized the samples to catalog sizes and structural properties, and tested different exposure methodologies: exposure in saline solution and in the presence of growth media. Furthermore, we performed experiments with peripheral blood mononuclear cells exposed to our GO materials. METHODS: Atomic force microscopy, scanning electron microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy and transmission electron microscopy were used to characterize the morphology and composition of different samples of GO: GO-H2O, GO-PBS and GO-MG. Our samples had 2D sizes of ~100 nm (GO-H2O and GO-PBS) and >2 µm (GO-MG). We tested antibacterial activity and cytotoxicity toward peripheral blood mononuclear cells of 3 different GO samples. RESULTS: A size-dependent growth inhibition of Escherichia coli (DH5 α) in suspension was found, which proved that this effect depends strongly on the protocol followed for exposure. Hemocompatibility was confirmed by exposing peripheral blood mononuclear cells to materials for 24 hours; viability and apoptosis tests were also carried out. CONCLUSIONS: Our experiments provide vital information for future applications of GO in suspension. If its antibacterial properties are to be potentiated, care should be taken to select 2D sizes in the micrometer range, and exposure should not be carried out in the presence of grow media.

Nanocrystalline anatase TiO2/reduced graphene oxide composite films as photoanodes for photoelectrochemical water splitting studies: the role of reduced graphene oxide.

Nanocrystalline TiO2 and reduced graphene oxide (TiO2/RGO) composite films were prepared by combining a sol-gel method with hydrothermal treatment, employing titanium isopropoxide (Ti(O(i)Pr)4) and graphene oxide (GO) as starting materials. Although several reports in the literature have explored the benefits of RGO addition in titania films for photocatalysis and water splitting reactions, the role of RGO in the composite is always described as that of a material that is able to act as an electron acceptor and transport electrons more efficiently. However, in most of these reports, no clear evidence for this "role" is presented, and the main focus is deviated to the improved efficiency and not to the reasons for said efficiency. In this study, we employed several techniques to definitively present our understanding of the role of RGO in titania composite films. The TiO2/RGO composite films were characterized by X ray diffraction, Raman spectroscopy, microscopy and electrochemical techniques. In photoelectrochemical water splitting studies, the TiO2/RGO(0.1%) photoelectrodes showed the highest photocurrent density values (0.20 mA cm(-2) at 1.23 VRHE) compared to other electrodes, with an increase of 78% in relation to pristine TiO2 film (0.11 mA cm(-2) at 1.23 VRHE). The transient absorption spectroscopy (TAS) results indicated increases in the lifetime and yield of both the photogenerated holes and electrons. Interestingly, the TiO2/RGO(0.1%) film exhibited the best charge generation upon excitation, corroborating the photoelectrochemical data. We proposed that in films with lower concentrations (<0.1 wt%), the RGO sheets are electron acceptors, and a decrease in the charge recombination processes is the immediate consequence. Thus, both holes and electrons live longer and contribute more effectively to the photocurrent density.

Chemical analysis and molecular models for calcium-oxygen-carbon interactions in black carbon found in fertile Amazonian anthrosoils.

Carbon particles containing mineral matter promote soil fertility, helping it to overcome the rather unfavorable climate conditions of the humid tropics. Intriguing examples are the Amazonian Dark Earths, anthropogenic soils also known as "Terra Preta de Índio'' (TPI), in which chemical recalcitrance and stable carbon with millenary mean residence times have been observed. Recently, the presence of calcium and oxygen within TPI-carbon nanoparticles at the nano- and mesoscale ranges has been demonstrated. In this work, we combine density functional theory calculations, scanning transmission electron microscopy, energy dispersive X-ray spectroscopy, Fourier transformed infrared spectroscopy, and high resolution X-ray photoelectron spectroscopy of TPI-carbons to elucidate the chemical arrangements of calcium-oxygen-carbon groups at the molecular level in TPI. The molecular models are based on graphene oxide nanostructures in which calcium cations are strongly adsorbed at the oxide sites. The application of material science techniques to the field of soil science facilitates a new level of understanding, providing insights into the structure and functionality of recalcitrant carbon in soil and its implications for food production and climate change.

A study of the physical, chemical and biological properties of TiO2 coatings produced by micro-arc oxidation in a Ca-P-based electrolyte.

In this work, a porous and homogeneous titanium dioxide layer was grown on commercially pure titanium substrate using a micro-arc oxidation (MAO) process and Ca-P-based electrolyte. The structure and morphology of the TiO2 coatings were characterized by X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy, and profilometry. The chemical properties were studied using electron dispersive X-ray spectroscopy (SEM-EDS) and X-ray photoelectron spectroscopy. The wettability of the coating was evaluated using contact angle measurements. During the MAO process, Ca and P ions were incorporated into the oxide layer. The TiO2 coating was composed of a mixture of crystalline and amorphous structures. The crystalline part of the sample consisted of a major anatase phase and a minor rutile phase. A cross-sectional image of the coating-substrate interface reveals the presence of voids elongated along the interface. An osteoblast culture was performed to verify the cytocompatibility of the anodized surface. The results of the cytotoxicity tests show satisfactory cell viability of the titanium dioxide films produced in this study.