ABSTRACT
Non-linear pyroelectric energy harvesting using ferroelectric thin films exhibits high energy conversion, primarily due to their large breakdown field compared to bulks. Here, we report the pyroelectric energy conversion potential of lead scandium tantalate, Pb(Sc1/2Ta1/2)O3 (PST) thin film fabricated on a c-sapphire substrate using chemical solution deposition. To enable the application of high electric field and to assess the pyroelectric energy conversion performance, interdigitated electrodes were deposited on the PST thin film. A maximum harvested energy density of 9.1 J cm-3 per cycle was deduced from polarization measurements in films undergoing an Olsen cycle between 0 °C and 150 °C when the electric field was varied between 50 and 1500 kV/cm. Furthermore, PST thin films can reach up to 27 % of Carnot efficiency for a temperature interval of 10 K between 30 °C and 40 °C. This study highlights the significance of PST thin films for electro-thermal energy harvesting and promising opportunities for enhancing the conversion efficiency and power density using thin films or thin film multi-layer capacitors in the future for thermal energy harvesting.
ABSTRACT
Cooling through solid-state electrocaloric materials is an attractive replacement for vapor compression. Despite recent efforts, devices that are potentially commercially competitive have not been developed. We present an electrocaloric cooler with a maximum temperature span of 20.9 kelvin and a maximum cooling power of 4.2 watts under the moderate applied electric field of 10 volts per micrometer without any observed breakdown. Moreover, the maximum coefficient of performance, even taking into account energy expended on fluid pumping, reaches 64% of Carnot's efficiency as long as energy is properly recovered. We believe that this demonstration shows electrocaloric cooling to be a very promising alternative to vapor compression cooling.
ABSTRACT
Coming up with sustainable sources of electricity is one of the grand challenges of this century. The research field of materials for energy harvesting stems from this motivation, including thermoelectrics1, photovoltaics2 and thermophotovoltaics3. Pyroelectric materials, converting temperature periodic variations in electricity, have been considered as sensors4 and energy harvesters5-7, although we lack materials and devices able to harvest in the joule range. Here we develop a macroscopic thermal energy harvester made of 42 g of lead scandium tantalate in the form of multilayer capacitors that produces 11.2 J of electricity per thermodynamic cycle. Each pyroelectric module can generate up to 4.43 J cm-3 of electric energy density per cycle. We also show that two of these modules weighing 0.3 g are sufficient to sustainably supply an autonomous energy harvester embedding microcontrollers and temperature sensors. Finally, we show that for a 10 K temperature span these multilayer capacitors can reach 40% of Carnot efficiency. These performances stem from (1) a ferroelectric phase transition enabling large efficiency, (2) low leakage current preventing losses and (3) high breakdown voltage. These macroscopic, scalable and highly efficient pyroelectric energy harvesters enable the reconsideration of the production of electricity from heat.
