Associations of the Force-velocity Profile with Isometric Strength and Neuromuscular Factors.

We aimed to explore relationships between the force-velocity (FV) profile and the isometric muscle torque performance during a knee extension task. The FV profile (force-intercept [F0], velocity-intercept [V0], maximum power [Pmax], and FV slope) during the countermovement jump (CMJ) exercise and isometric maximum voluntary torque (MVIC) and explosive voluntary torque production were assessed in 43 participants. Electromyography (EMG) was recorded during the isometric assessments and resting muscle architecture measurements were also performed (quadriceps thickness, vastus lateralis pennation angle and fascicle length). Pearson's correlation coefficients were computed to assess bivariate relationships between the FV profile, isometric torque, EMG activation and muscle architecture. F0 predictions from neuromuscular measurements were assessed through multiple linear regression. Associations of F0 and Pmax with isometric torque increased from explosive to MVIC torque (r≥0.47; P<0.05). Significant associations were found between muscle architecture and F0 and Pmax (r≥0.69; P<0.05), while V0 and FV slope were unrelated (r≤0.27; P>0.05). Quadriceps thickness and VL pennation angle explained ~62% of F0 variance. In conclusion, the knee extensors maximal isometric strength and their morphological architecture are strongly related to F0 estimated from a CMJ FV profile test.

Intermittent Resistance Training at Moderate Altitude: Effects on the Force-Velocity Relationship, Isometric Strength and Muscle Architecture.

Intermittent hypoxic resistance training (IHRT) may help to maximize the adaptations following resistance training, although conflicting evidence is available. The aim of this study was to explore the influence of moderate altitude on the functional, neural and muscle architecture responses of the quadriceps muscles following a power-oriented IHRT intervention. Twenty-four active males completed two 4-week consecutive training blocks comprising general strengthening exercises (weeks 1-4) and power-oriented resistance training (weeks 5-8). Training sessions were conducted twice a week at moderate altitude (2320 m; IHRT, n = 13) or normoxia (690 m; NT, n = 11). Training intensity during the second training block was set to the individual load corresponding to a barbell mean propulsive velocity of 1 m·s-1. Pre-post assessments, performed under normoxic conditions, comprised quadriceps muscle architecture (thickness, pennation angle and fascicle length), isometric maximal (MVF) and explosive strength, and voluntary muscle activation. Dynamic strength performance was assessed through the force-velocity relationship (F0, V0, P0) and a repeated CMJ test (CMJ15MP). Region-specific muscle thickness changes were observed in both training groups (p < 0.001, ηG2 = 0.02). A small opposite trend in pennation angle changes was observed (ES [90% CI]: -0.33 [-0.65, -0.01] vs. 0.11 [-0.44, 0.6], in the IHRT and NT group, respectively; p = 0.094, ηG2 = 0.02). Both training groups showed similar improvements in MVF (ES: 0.38 [0.20, 0.56] vs. 0.55 [0.29, 0.80], in the IHRT and NT group, respectively; p = 0.645, ηG2 < 0.01), F0 (ES: 0.41 [-0.03, 0.85] vs. 0.52 [0.04, 0.99], in the IHRT and NT group, respectively; p = 0.569, ηG2 < 0.01) and P0 (ES: 0.53 [0.07, 0.98] vs. 0.19 [-0.06, 0.44], in the IHRT and NT group, respectively; p = 0.320, ηG2 < 0.01). No meaningful changes in explosive strength performance were observed. In conclusion, contrary to earlier adverse associations between altitude and resistance-training muscle adaptations, similar anatomical and functional muscle strength responses can be achieved in both environmental conditions. The observed region-specific muscle thickness changes may encourage further research on the potential influence of IHRT on muscle morphological changes.

The Maximal Mechanical Capabilities of Leg Muscles to Generate Velocity and Power Improve at Altitude.

García-Ramos, A, Stirn, I, Padial, P, Argüelles-Cienfuegos, J, De la Fuente, B, Strojnik, V, and Feriche, B. The maximal mechanical capabilities of leg extensors muscles to generate velocity and power improve at altitude. J Strength Cond Res 32(2): 475-481, 2018-This study aimed (a) to analyze the effect of an acute exposure to terrestrial altitude on the force-velocity relationship parameters (maximum force [F0], maximum velocity [V0], and maximum power [P0]) during a loaded squat jump (SJ), and (b) to compare unloaded SJ and countermovement jump (CMJ) performance between sea level and altitude conditions. Seventeen international swimmers were tested at sea level (295 m asl) and 7 days later at terrestrial altitude (2,320 m asl) during their first 24 hours of altitude exposure. The maximum values of force and velocity were recorded during a loaded SJ (25-100% of body weight) to determine F0, V0, and P0 parameters. Inconsequential differences between environmental conditions were found for F0 (p = 0.993, 0.02%). However, V0 (p = 0.038, 7.6%) and P0 (p = 0.004, 6.8%) were higher at altitude. Peak values of force (SJ: p = 0.420, 1.19%; CMJ: p = 0.010, 3.6%), power (SJ: p = 0.028, 3.5%; CMJ: p = 0.005, 3.82%), and take-off velocity (SJ: p = 0.071, 1.6%; CMJ: p = 0.009, 1.9%) recorded during the SJ and CMJ were also higher at altitude. These results highlight the potential effect of an acute exposure to terrestrial altitude on enhancing vertical jump performance. The increase in maximal power of the leg muscles at altitude is caused by an improvement in the theoretical maximal velocity at which lower limbs can extend with no significant changes in the theoretical maximal force.

The Effect of Acute and Chronic Exposure to Hypobaric Hypoxia on Loaded Squat Jump Performance.

The present study aimed (1) to compare loaded squat jump performance after an acute and chronic exposure to a moderate natural altitude between normoxia and hypobaric hypoxia conditions, and (2) to analyze the effect of an altitude training camp on loaded jump squat development. Sixteen male swimmers (17.1 ± 0.8 years) took part in a 17-day training camp at a natural moderate altitude. They were randomly tested in counterbalanced order on days 1 and 3 in normoxia and hypoxia (pretest) and on days 15 and 17 again in normoxia and hypoxia (posttest). The peak velocity reached with loads equivalent to 25%, 50%, 75% and 100% of swimmers' pretest body weight in the loaded squat jump exercise was the dependent variable analyzed. An overall increase in peak velocity during the test performed in hypoxia of 6.5% in pretest (p < 0.001, ES = 0.98) and 4.5% in posttest (p < 0.001, ES = 0.81) was observed. An overall increment in peak velocity of 4.0% considering the data for normoxia tests (p < 0.001, ES = 0.61) and 2.1% considering the data for hypoxia tests (p = 0.008, ES = 0.36) was achieved after the altitude training camp. These results highlight the beneficial effects of hypobaric hypoxia on jump performance after short and longer term exposure to a natural moderate altitude. The increase in loaded squat jump performance following the 17-day training camp suggests that altitude training could constitute a favorable stimulus in explosive strength.

The Effect of an Altitude Training Camp on Swimming Start Time and Loaded Squat Jump Performance.

This study evaluated the influence of an altitude training (AT) camp on swimming start time and loaded squat jump performance. To accomplish this goal, 13 international swimmers (8 women, 5 men) were allocated to both the control (Sea Level Training, SLT) and experimental conditions (AT, 2320 m above sea level) that were separated by a one year period. All tests (15 m freestyle swimming start and loaded squat jumps with additional loads of 25%, 50%, 75%, and 100% of swimmers' body weight) were performed before and after a concurrent 3-week strength and endurance training program prescribed by the national coach. Following the SLT camp, significant impairments in swimming start times to 10 (+3.1%) and 15 m (+4.0%) were observed (P < 0.05), whereas no significant changes for the same distances were detected following the AT camp (-0.89%; P > 0.05). Trivial changes in peak velocity were obtained during the loaded squat jump after both training periods (effect sizes: < 0.20). Based on these results we can conclude that a traditional training high-living high strategy concurrent training of 3 weeks does not adversely affect swimming start time and loaded squat jump performance in high level swimmers, but further studies are necessary to assess the effectiveness of power-oriented resistance training in the development of explosive actions.

Comparison of the force-, velocity-, and power-time curves recorded with a force plate and a linear velocity transducer.

This study aimed to correlate, compare, and determine the reliability of force, velocity, and power values collected with a force plate (FP) and a linear transducer during loaded jumps. Twenty-three swimmers performed an incremental loading test at 25, 50, 75, and 100% of their own body weight on a FP. A linear velocity transducer (LVT) was attached to the bar to assess the peak and the mean values of force, velocity, and power. Both the peak variables (r = 0.94 - 0.99 for peak force, r = 0.83 - 0.91 for peak velocity, and r = 0.90-0.94 for peak power; p < 0.001) and the mean variables (r = 0.96-0.99 for mean force, r = 0.87-0.89 for mean velocity, and r = 0.93-0.96 for mean power; p < 0.001) were strongly correlated between both measurement tools. Differences in the shape of the force-, velocity-, and power-time curves were observed. The LVT data showed a steeper increase in these variables at the beginning of the movement, while the FP recorded larger values in the latter part. Peak values were more reliable than mean values. These results suggest that the LVT is a valid tool for the assessment of loaded squat jump.

The Relationship Between the Lower-Body Muscular Profile and Swimming Start Performance.

This study aimed to examine the correlation of different dry land strength and power tests with swimming start performance. Twenty international level female swimmers (age 15.3 ± 1.6 years, FINA point score 709.6 ± 71.1) performed the track freestyle start. Additionally, dry land tests were conducted: a) squat (SJ) and countermovement jumps (CMJ), b) squat jumps with additional resistance equivalent to 25, 50, 75 and 100% of swimmers' body weight [BW]), and c) leg extension and leg flexion maximal voluntary isometric contractions. Correlations between dry land tests and start times at 5, 10 and 15 m were quantified through Pearson's linear correlation coefficients (r). The peak bar velocity reached during the jumps with additional resistance was the variable most correlated to swimming start performance (r = -0.57 to -0.66 at 25%BW; r = -0.57 to -0.72 at 50%BW; r = -0.59 to -0.68 at 75%BW; r = -0.50 to - 0.64 at 100%BW). A few significant correlations between the parameters of the SJ and the CMJ with times of 5 and 10 m were found, and none with the isometric variables. The peak velocity reached during jumps with external loads relative to BW was found a good indicator of swimming start performance.

Relationship Between Vertical Jump Height and Swimming Start Performance Before and After an Altitude Training Camp.

This study aimed (a) to analyze the development in the squat jump height and swimming start performance after an altitude training camp, (b) to correlate the jump height and swimming start performance before and after the altitude training period, and (c) to correlate the percent change in the squat jump height with the percent change in swimming start performance. Fifteen elite male swimmers from the Spanish Junior National Team (17.1 ± 0.8 years) were tested before and after a 17-day training camp at moderate altitude. The height reached in the squat jump exercise with additional loads of 0, 25, 50, 75, and 100% of swimmers' pretest body weight and swimming start performance (time to 5, 10, and 15 m) were the dependent variables analyzed. Significant increases in the jump height (p ≤ 0.05; effect size [ES]: 0.35-0.48) and swimming start performance (p < 0.01; ES: 0.48-0.52) after the training period were observed. The start time had similar correlations with the jump height before training (r = -0.56 to -0.77) and after training (r = -0.50 to -0.71). The change in the squat jump height was inversely correlated with the change in the start time at 5 m (r = -0.47), 10 m (r = -0.73), and 15 m (r = -0.62). These results suggest that altitude training can be suitable to enhance explosive performance. The correlations obtained between the squat jump height and start time in the raw and change scores confirm the relevance of having high levels of lower-body muscular power to optimize swimming start performance.

Reliability Analysis of Traditional and Ballistic Bench Press Exercises at Different Loads.

The purpose of this study was to determine test-retest reliability for peak barbell velocity (Vpeak) during the bench press (BP) and bench press throw (BPT) exercises for loads corresponding to 20-70% of one-repetition maximum (1RM). Thirty physically active collegiate men conducted four evaluations after a preliminary BP 1RM determination (1RM·bw-1 = 1.02 ± 0.16 kg·kg-1). In counterbalanced order, participants performed two sessions of the BP in one week and two sessions of the BPT in another week. Recovery time between sessions within the same week was 48 hours and recovery time between sessions of different weeks was 120 hours. On each day of evaluation the individual load-velocity relationship at each tenth percentile (20-70% of 1RM) in a Smith machine for the BP or BPT was determined. Participants performed three attempts per load, but only the best repetition (highest Vpeak), registered by a linear position transducer, was analysed. The BPT resulted in a significantly lower coefficient of variation (CV) for the whole load-velocity relationship, compared to the BP (2.48% vs. 3.22%; p = 0.040). Test-retest intraclass correlation coefficients (ICCs) ranged from r = 0.94-0.85 for the BPT and r = 0.91-0.71 for the BP (p < 0.001). The reduction in the biological within-subject variation in BPT exercise could be promoted by the braking phase that obligatorily occurs during a BP executed with light or moderate loads. Therefore, we recommend the BPT exercise for a most accurate assessment of upper-body velocity.

Effect of Different Interrepetition Rest Periods on Barbell Velocity Loss During the Ballistic Bench Press Exercise.

This study investigated the effect of introducing different interrepetition rest (IRR) periods on the ability to sustain maximum bench press throw velocity with a range of loads commonly used to develop upper-body power. Thirty-four physically active collegiate men (age: 21.5 ± 2.8 years; body mass: 75.2 ± 7.2 kg; height: 176.9 ± 4.9 cm) were tested during 2 consecutive weeks. During the first week, the maximum dynamic strength (repetition maximum [RM]) in bench press exercise was determined (RM = 76.7 ± 13.2 kg). The following week, 3 testing sessions were conducted with 48 hours apart in random order. In each day of evaluation, only 1 load (30%RM, 40%RM, or 50%RM) was assessed in the bench press throw exercise. With each load, subjects performed 3 single sets of 15 repetitions (15-minute interset rest) with 3 different sets configurations: continuous repetitions (CR), 6 seconds of IRR (IRR6), and 12 seconds of IRR (IRR12). The decrease of peak velocity (PV) was significantly lower for IRR12 compared with CR and IRR6 at least since the repetition 4. No differences between CR and IRR6 protocols were found until the repetition 7 at 30%RM and 40%RM and until the repetition 5 at 50%RM. The decrease of PV during the CR protocol was virtually linear for the 3 loads analyzed (r > 0.99); however, this linear relationship became weaker for IRR6 (r = 0.79-0.95) and IRR12 (r = 0.35-0.87). These results demonstrate that IRR periods allow increasing the number of repetitions before the onset of significant velocity losses.

Relationship between different push-off variables and start performance in experienced swimmers.

The objective of this study was to determine the relationship between different variables measured with a force plate during the swimming start push-off phase and start performance presented by times to 5, 10 and 15 m. Twenty-one women from the Slovenian national swimming team performed two different swim starts (freestyle and undulatory) on a portable force plate to a distance further than 15 m. Correlations between push-off variables and times to 5, 10 and 15 m were quantified through Pearson's product-moment correlation coefficient (r). The variables that significantly correlated (p < .05) to all times measured in the two starts performed were: average horizontal acceleration (freestyle: r = -0.58 to -0.71; and undulatory: r = -0.55 to -0.66), horizontal take-off velocity (freestyle: r = -0.56 to -0.69; and undulatory: r = -0.53 to -0.67) and resultant take-off velocity (freestyle: r = -0.53 to -0.65; and undulatory: r = -0.52 to -0.61). None of the variables derived from the vertical force were correlated to swimming start performance (p > .05). Based on the results of this study, we can conclude that horizontal take-off velocity and average horizontal acceleration (calculated as the average horizontal force divided by swimmer's body mass) are the variables most related to swimming start performance in experienced swimmers, and therefore could be the preferred measures to monitor swimmers' efficiency during the push-off phase.

Predicting vertical jump height from bar velocity.

The objective of the study was to assess the use of maximum (Vmax) and final propulsive phase (FPV) bar velocity to predict jump height in the weighted jump squat. FPV was defined as the velocity reached just before bar acceleration was lower than gravity (-9.81 m·s(-2)). Vertical jump height was calculated from the take-off velocity (Vtake-off) provided by a force platform. Thirty swimmers belonging to the National Slovenian swimming team performed a jump squat incremental loading test, lifting 25%, 50%, 75% and 100% of body weight in a Smith machine. Jump performance was simultaneously monitored using an AMTI portable force platform and a linear velocity transducer attached to the barbell. Simple linear regression was used to estimate jump height from the Vmax and FPV recorded by the linear velocity transducer. Vmax (y = 16.577x - 16.384) was able to explain 93% of jump height variance with a standard error of the estimate of 1.47 cm. FPV (y = 12.828x - 6.504) was able to explain 91% of jump height variance with a standard error of the estimate of 1.66 cm. Despite that both variables resulted to be good predictors, heteroscedasticity in the differences between FPV and Vtake-off was observed (r(2) = 0.307), while the differences between Vmax and Vtake-off were homogenously distributed (r(2) = 0.071). These results suggest that Vmax is a valid tool for estimating vertical jump height in a loaded jump squat test performed in a Smith machine. Key pointsVertical jump height in the loaded jump squat can be estimated with acceptable precision from the maximum bar velocity recorded by a linear velocity transducer.The relationship between the point at which bar acceleration is less than -9.81 m·s(-2) and the real take-off is affected by the velocity of movement.Mean propulsive velocity recorded by a linear velocity transducer does not appear to be optimal to monitor ballistic exercise performance.