Plant-Derived Zein as an Alternative to Animal-Derived Gelatin for Use as a Tissue Engineering Scaffold.

Natural biomaterials are commonly used as tissue engineering scaffolds due to their biocompatibility and biodegradability. Plant-derived materials have also gained significant interest due to their abundance and as a sustainable resource. This study evaluates the corn-derived protein zein as a plant-derived substitute for animal-derived gelatin, which is widely used for its favorable cell adhesion properties. Limited studies exist evaluating pure zein for tissue engineering. Herein, fibrous zein scaffolds are evaluated in vitro for cell adhesion, growth, and infiltration into the scaffold in comparison to gelatin scaffolds and are further studied in a subcutaneous model in vivo. Human mesenchymal stem cells (MSCs) on zein scaffolds express focal adhesion kinase and integrins such as αvß3, α4, and ß1 similar to gelatin scaffolds. MSCs also infiltrate zein scaffolds with a greater penetration depth than cells on gelatin scaffolds. Cells loaded onto zein scaffolds in vivo show higher cell proliferation and CD31 expression, as an indicator of blood vessel formation. Findings also demonstrate the capability of zein scaffolds to maintain the multipotent capability of MSCs. Overall, findings demonstrate plant-derived zein may be a suitable alternative to the animalderived gelatin and demonstrates zein's potential as a scaffold for tissue engineering.

A scaffold containing zinc oxide for Schwann cell-mediated axon growth.

Objective.Schwann cells (SCs) transplanted in damaged nervous tissue promote axon growth, which may support the recovery of function lost after injury. However, SC transplant-mediated axon growth is often limited and lacks direction.Approach.We have developed a zinc oxide (ZnO) containing fibrous scaffold consisting of aligned fibers of polycaprolactone (PCL) with embedded ZnO nanoparticles as a biodegradable, bifunctional scaffold for promoting and guiding axon growth. This scaffold has bifunctional properties wherein zinc is released providing bioactivity and ZnO has well-known piezoelectric properties where piezoelectric materials generate electrical activity in response to minute deformations. In this study, SC growth, SC-mediated axon extension, and the presence of myelin basic protein (MBP), as an indicator of myelination, were evaluated on the scaffolds containing varying concentrations of ZnOin vitro. SCs and dorsal root ganglion (DRG) neurons were cultured, either alone or in co-culture, on the scaffolds.Main results.Findings demonstrated that scaffolds with 1 wt.% ZnO promoted the greatest SC growth and SC-mediated axon extension. The presence of brain-derived neurotrophic factor (BDNF) was also determined. BDNF increased in co-cultures for all scaffolds as compared to SCs or DRGs cultured alone on all scaffolds. For co-cultures, cells on scaffolds with low levels of ZnO (0.5 wt.% ZnO) had the highest amount of BDNF as compared to cells on higher ZnO-containing scaffolds (1 and 2 wt.%). MBP immunostaining was only detected in co-cultures on PCL control scaffolds (without ZnO).Significance.The results of this study demonstrate the potential of the ZnO-containing scaffolds for SC-mediated axon growth and its potential for use in nervous tissue repair.

Scaffolds containing GAG-mimetic cellulose sulfate promote TGF-ß interaction and MSC Chondrogenesis over native GAGs.

Cartilage tissue engineering strategies seek to repair damaged tissue using approaches that include scaffolds containing components of the native extracellular matrix (ECM). Articular cartilage consists of glycosaminoglycans (GAGs) which are known to sequester growth factors. In order to more closely mimic the native ECM, this study evaluated the chondrogenic differentiation of mesenchymal stem cells (MSCs), a promising cell source for cartilage regeneration, on fibrous scaffolds that contained the GAG-mimetic cellulose sulfate. The degree of sulfation was evaluated, examining partially sulfated cellulose (pSC) and fully sulfated cellulose (NaCS). Comparisons were made with scaffolds containing native GAGs (chondroitin sulfate A, chondroitin sulfate C and heparin). Transforming growth factor-beta3 (TGF-ß3) sequestration, as measured by rate of association, was higher for sulfated cellulose-containing scaffolds as compared to native GAGs. In addition, TGF-ß3 sequestration and retention over time was highest for NaCS-containing scaffolds. Sulfated cellulose-containing scaffolds loaded with TGF-ß3 showed enhanced chondrogenesis as indicated by a higher Collagen Type II:I ratio over native GAGs. NaCS-containing scaffolds loaded with TGF-ß3 had the highest expression of chondrogenic markers and a reduction of hypertrophic markers in dynamic loading conditions, which more closely mimic in vivo conditions. Studies also demonstrated that TGF-ß3 mediated its effect through the Smad2/3 signaling pathway where the specificity of TGF-ß receptor (TGF- ßRI)-phosphorylated SMAD2/3 was verified with a receptor inhibitor. Therefore, studies demonstrate that scaffolds containing cellulose sulfate enhance TGF-ß3-induced MSC chondrogenic differentiation and show promise for promoting cartilage tissue regeneration.

Biomaterials and tissue engineering approaches using glycosaminoglycans for tissue repair: Lessons learned from the native extracellular matrix.

Glycosaminoglycans (GAGs) are an important component of the extracellular matrix as they influence cell behavior and have been sought for tissue regeneration, biomaterials, and drug delivery applications. GAGs are known to interact with growth factors and other bioactive molecules and impact tissue mechanics. This review provides an overview of native GAGs, their structure, and properties, specifically their interaction with proteins, their effect on cell behavior, and their mechanical role in the ECM. GAGs' function in the extracellular environment is still being understood however, promising studies have led to the development of medical devices and therapies. Native GAGs, including hyaluronic acid, chondroitin sulfate, and heparin, have been widely explored in tissue engineering and biomaterial approaches for tissue repair or replacement. This review focuses on orthopaedic and wound healing applications. The use of GAGs in these applications have had significant advances leading to clinical use. Promising studies using GAG mimetics and future directions are also discussed. STATEMENT OF SIGNIFICANCE: Glycosaminoglycans (GAGs) are an important component of the native extracellular matrix and have shown promise in medical devices and therapies. This review emphasizes the structure and properties of native GAGs, their role in the ECM providing biochemical and mechanical cues that influence cell behavior, and their use in tissue regeneration and biomaterial approaches for orthopaedic and wound healing applications.

Plant cell adhesion and growth on artificial fibrous scaffolds as an in vitro model for plant development.

Mechanistic studies of plant development would benefit from an in vitro model that mimics the endogenous physical interactions between cells and their microenvironment. Here, we present artificial scaffolds to which both solid- and liquid-cultured tobacco BY-2 cells adhere without perturbing cell morphology, division, and cortical microtubule organization. Scaffolds consisting of polyvinylidene tri-fluoroethylene (PVDF-TrFE) were prepared to mimic the cell wall's fibrillar structure and its relative hydrophobicity and piezoelectric property. We found that cells adhered best to scaffolds consisting of nanosized aligned fibers. In addition, poling of PVDF-TrFE, which orients the fiber dipoles and renders the scaffold more piezoelectric, increased cell adhesion. Enzymatic treatments revealed that the plant cell wall polysaccharide, pectin, is largely responsible for cell adhesion to scaffolds, analogous to pectin-mediated cell adhesion in plant tissues. Together, this work establishes the first plant biomimetic scaffolds that will enable studies of how cell-cell and cell-matrix interactions affect plant developmental pathways.

The Effect of Physical Cues of Biomaterial Scaffolds on Stem Cell Behavior.

Stem cells have been sought as a promising cell source in the tissue engineering field due to their proliferative capacity as well as differentiation potential. Biomaterials have been utilized to facilitate the delivery of stem cells in order to improve their engraftment and long-term viability upon implantation. Biomaterials also have been developed as scaffolds to promote stem cell induced tissue regeneration. This review focuses on the latter where the biomaterial scaffold is designed to provide physical cues to stem cells in order to promote their behavior for tissue formation. Recent work that explores the effect of scaffold physical properties, topography, mechanical properties and electrical properties, is discussed. Although still being elucidated, the biological mechanisms, including cell shape, focal adhesion distribution, and nuclear shape, are presented. This review also discusses emerging areas and challenges in clinical translation.

Biodegradable zinc oxide composite scaffolds promote osteochondral differentiation of mesenchymal stem cells.

Osteoarthritis (OA) involves the degeneration of articular cartilage and subchondral bone. The capacity of articular cartilage to repair and regenerate is limited. A biodegradable, fibrous scaffold containing zinc oxide (ZnO) was fabricated and evaluated for osteochondral tissue engineering applications. ZnO has shown promise for a variety of biomedical applications but has had limited use in tissue engineering. Composite scaffolds consisted of ZnO nanoparticles embedded in slow degrading, polycaprolactone to allow for dissolution of zinc ions over time. Zinc has well-known insulin-mimetic properties and can be beneficial for cartilage and bone regeneration. Fibrous ZnO composite scaffolds, having varying concentrations of 1-10 wt.% ZnO, were fabricated using the electrospinning technique and evaluated for human mesenchymal stem cell (MSC) differentiation along chondrocyte and osteoblast lineages. Slow release of the zinc was observed for all ZnO composite scaffolds. MSC chondrogenic differentiation was promoted on low percentage ZnO composite scaffolds as indicated by the highest collagen type II production and expression of cartilage-specific genes, while osteogenic differentiation was promoted on high percentage ZnO composite scaffolds as indicated by the highest alkaline phosphatase activity, collagen production, and expression of bone-specific genes. This study demonstrates the feasibility of ZnO-containing composites as a potential scaffold for osteochondral tissue engineering.

Aligned fibrous PVDF-TrFE scaffolds with Schwann cells support neurite extension and myelination in vitro.

OBJECTIVE: Polyvinylidene fluoride-trifluoroethylene (PVDF-TrFE), which is a piezoelectric, biocompatible polymer, holds promise as a scaffold in combination with Schwann cells (SCs) for spinal cord repair. Piezoelectric materials can generate electrical activity in response to mechanical deformation, which could potentially stimulate spinal cord axon regeneration. Our goal in this study was to investigate PVDF-TrFE scaffolds consisting of aligned fibers in supporting SC growth and SC-supported neurite extension and myelination in vitro. APPROACH: Aligned fibers of PVDF-TrFE were fabricated using the electrospinning technique. SCs and dorsal root ganglion (DRG) explants were co-cultured to evaluate SC-supported neurite extension and myelination on PVDF-TrFE scaffolds. MAIN RESULTS: PVDF-TrFE scaffolds supported SC growth and neurite extension, which was further enhanced by coating the scaffolds with Matrigel. SCs were oriented and neurites extended along the length of the aligned fibers. SCs in co-culture with DRGs on PVDF-TrFE scaffolds promoted longer neurite extension as compared to scaffolds without SCs. In addition to promoting neurite extension, SCs also formed myelin around DRG neurites on PVDF-TrFE scaffolds. SIGNIFICANCE: This study demonstrated PVDF-TrFE scaffolds containing aligned fibers supported SC-neurite extension and myelination. The combination of SCs and PVDF-TrFE scaffolds may be a promising tissue engineering strategy for spinal cord repair.

Investigating cellulose derived glycosaminoglycan mimetic scaffolds for cartilage tissue engineering applications.

Articular cartilage has a limited capacity to heal and, currently, no treatment exists that can restore normal hyaline cartilage. Creating tissue engineering scaffolds that more closely mimic the native extracellular matrix may be an attractive approach. Glycosaminoglycans, which are present in native cartilage tissue, provide signalling and structural cues to cells. This study evaluated the use of a glycosaminoglycan mimetic, derived from cellulose, as a potential scaffold for cartilage repair applications. Fully sulfated sodium cellulose sulfate (NaCS) was initially evaluated in soluble form as an additive to cell culture media. Human mesenchymal stem cell (MSC) chondrogenesis in pellet culture was enhanced with 0.01% NaCS added to induction media as demonstrated by significantly higher gene expression for type II collagen and aggrecan. NaCS was combined with gelatine to form fibrous scaffolds using the electrospinning technique. Scaffolds were characterized for fibre morphology, overall hydrolytic stability, protein/growth factor interaction and for supporting MSC chondrogenesis in vitro. Scaffolds immersed in phosphate buffered saline for up to 56 days had no changes in swelling and no dissolution of NaCS as compared to day 0. Increasing concentrations of the model protein lysozyme and transforming growth factor-ß3 were detected on scaffolds with increasing concentrations of NaCS (p < 0.05). MSC chondrogenesis was enhanced on the scaffold with the lowest NaCS concentration as seen with the highest collagen type II production, collagen type II immunostaining, and expression of cartilage-specific genes. These studies demonstrate the feasibility of cellulose sulfate as a scaffolding material for cartilage tissue engineering. Copyright © 2016 John Wiley & Sons, Ltd.

Transplantation of Schwann Cells Inside PVDF-TrFE Conduits to Bridge Transected Rat Spinal Cord Stumps to Promote Axon Regeneration Across the Gap.

Among various models for spinal cord injury in rats, the contusion model is the most often used because it is the most common type of human spinal cord injury. The complete transection model, although not as clinically relevant as the contusion model, is the most rigorous method to evaluate axon regeneration. In the contusion model, it is difficult to distinguish regenerated from sprouted or spared axons due to the presence of remaining tissue post injury. In the complete transection model, a bridging method is necessary to fill the gap and create continuity from the rostral to the caudal stumps in order to evaluate the effectiveness of the treatments. A reliable bridging surgery is essential to test outcome measures by reducing the variability due to the surgical method. The protocols described here are used to prepare Schwann cells (SCs) and conduits prior to transplantation, complete transection of the spinal cord at thoracic level 8 (T8), insert the conduit, and transplant SCs into the conduit. This approach also uses in situ gelling of an injectable basement membrane matrix with SC transplantation that allows improved axon growth across the rostral and caudal interfaces with the host tissue.

Three-dimensional piezoelectric fibrous scaffolds selectively promote mesenchymal stem cell differentiation.

The discovery of electric fields in biological tissues has led to efforts in developing technologies utilizing electrical stimulation for therapeutic applications. Native tissues, such as cartilage and bone, exhibit piezoelectric behavior, wherein electrical activity can be generated due to mechanical deformation. Yet, the use of piezoelectric materials have largely been unexplored as a potential strategy in tissue engineering, wherein a piezoelectric biomaterial acts as a scaffold to promote cell behavior and the formation of large tissues. Here we show, for the first time, that piezoelectric materials can be fabricated into flexible, three-dimensional fibrous scaffolds and can be used to stimulate human mesenchymal stem cell differentiation and corresponding extracellular matrix/tissue formation in physiological loading conditions. Piezoelectric scaffolds that exhibit low voltage output, or streaming potential, promoted chondrogenic differentiation and piezoelectric scaffolds with a high voltage output promoted osteogenic differentiation. Electromechanical stimulus promoted greater differentiation than mechanical loading alone. Results demonstrate the additive effect of electromechanical stimulus on stem cell differentiation, which is an important design consideration for tissue engineering scaffolds. Piezoelectric, smart materials are attractive as scaffolds for regenerative medicine strategies due to their inherent electrical properties without the need for external power sources for electrical stimulation.

* Gelatin Scaffolds Containing Partially Sulfated Cellulose Promote Mesenchymal Stem Cell Chondrogenesis.

Articular cartilage has a limited capacity to heal after damage from injury or degenerative disease. Tissue engineering constructs that more closely mimic the native cartilage microenvironment can be utilized to promote repair. Glycosaminoglycans (GAGs), a major component of the cartilage extracellular matrix, have the ability to sequester growth factors due to their level and spatial distribution of sulfate groups. This study evaluated the use of a GAG mimetic, cellulose sulfate, as a scaffolding material for cartilage tissue engineering. Cellulose sulfate can be synthesized to have a similar level and spatial distribution of sulfates as chondroitin sulfate C (CSC), the naturally occurring GAG. This partially sulfated cellulose (pSC) was incorporated into a fibrous gelatin construct by the electrospinning process. Scaffolds were characterized for fiber morphology and overall stability over time in an aqueous environment, growth factor interaction, and for supporting mesenchymal stem cell (MSC) chondrogenesis in vitro. All scaffold groups had micron-sized fibers and maintained overall stability in aqueous environments. Increasing concentrations of the transforming growth factor-beta 3 (TGF-ß3) were detected on scaffolds with increasing pSC. MSC chondrogenesis was enhanced on the scaffold with the highest pSC concentration as seen with the highest collagen type II production, collagen type II immunostaining, expression of cartilage-specific genes, and ratio of collagen type II to collagen type I production. These studies demonstrated the potential of pSC sulfate as a scaffolding material for cartilage tissue engineering.

Enhanced noradrenergic axon regeneration into schwann cell-filled PVDF-TrFE conduits after complete spinal cord transection.

Schwann cell (SC) transplantation has been utilized for spinal cord repair and demonstrated to be a promising therapeutic strategy. In this study, we investigated the feasibility of combining SC transplantation with novel conduits to bridge the completely transected adult rat spinal cord. This is the first and initial study to evaluate the potential of using a fibrous piezoelectric polyvinylidene fluoride trifluoroethylene (PVDF-TrFE) conduit with SCs for spinal cord repair. PVDF-TrFE has been shown to enhance neurite growth in vitro and peripheral nerve repair in vivo. In this study, SCs adhered and proliferated when seeded onto PVDF-TrFE scaffolds in vitro. SCs and PVDF-TrFE conduits, consisting of random or aligned fibrous inner walls, were transplanted into transected rat spinal cords for 3 weeks to examine early repair. Glial fibrillary acidic protein (GFAP)+ astrocyte processes and GFP (green fluorescent protein)-SCs were interdigitated at both rostral and caudal spinal cord/SC transplant interfaces in both types of conduits, indicative of permissivity to axon growth. More noradrenergic/DßH+ (dopamine-beta-hydroxylase) brainstem axons regenerated across the transplant when greater numbers of GFAP+ astrocyte processes were present. Aligned conduits promoted extension of DßH+ axons and GFAP+ processes farther into the transplant than random conduits. Sensory CGRP+ (calcitonin gene-related peptide) axons were present at the caudal interface. Blood vessels formed throughout the transplant in both conduits. This study demonstrates that PVDF-TrFE conduits harboring SCs are promising for spinal cord repair and deserve further investigation. Biotechnol. Bioeng. 2017;114: 444-456. © 2016 Wiley Periodicals, Inc.

The Biology of Bone and Ligament Healing.

This review describes the normal healing process for bone, ligaments, and tendons, including primary and secondary healing as well as bone-to-bone fusion. It depicts the important mediators and cell types involved in the inflammatory, reparative, and remodeling stages of each healing process. It also describes the main challenges for clinicians when trying to repair bone, ligaments, and tendons with a specific emphasis on Charcot neuropathy, fifth metatarsal fractures, arthrodesis, and tendon sheath and adhesions. Current treatment options and research areas are also reviewed.

Piezoelectric materials for tissue regeneration: A review.

The discovery of piezoelectricity, endogenous electric fields and transmembrane potentials in biological tissues raised the question whether or not electric fields play an important role in cell function. It has kindled research and the development of technologies in emulating biological electricity for tissue regeneration. Promising effects of electrical stimulation on cell growth and differentiation and tissue growth has led to interest in using piezoelectric scaffolds for tissue repair. Piezoelectric materials can generate electrical activity when deformed. Hence, an external source to apply electrical stimulation or implantation of electrodes is not needed. Various piezoelectric materials have been employed for different tissue repair applications, particularly in bone repair, where charges induced by mechanical stress can enhance bone formation; and in neural tissue engineering, in which electric pulses can stimulate neurite directional outgrowth to fill gaps in nervous tissue injuries. In this review, a summary of piezoelectricity in different biological tissues, mechanisms through which electrical stimulation may affect cellular response, and recent advances in the fabrication and application of piezoelectric scaffolds will be discussed. STATEMENT OF SIGNIFICANCE: The discovery of piezoelectricity, endogenous electric fields and transmembrane potentials in biological tissues has kindled research and the development of technologies using electrical stimulation for tissue regeneration. Piezoelectric materials generate electrical activity in response to deformations and allow for the delivery of an electrical stimulus without the need for an external power source. As a scaffold for tissue engineering, growing interest exists due to its potential of providing electrical stimulation to cells to promote tissue formation. In this review, we cover the discovery of piezoelectricity in biological tissues, its connection to streaming potentials, biological response to electrical stimulation and commonly used piezoelectric materials for tissue regeneration. This review summarizes their potential as a promising scaffold in the tissue engineering field.

Evaluating protein incorporation and release in electrospun composite scaffolds for bone tissue engineering applications.

Electrospun polymer/ceramic composites have gained interest for use as scaffolds for bone tissue engineering applications. In this study, we investigated methods to incorporate Platelet Derived Growth Factor-BB (PDGF-BB) in electrospun polycaprolactone (PCL) or PCL prepared with polyethylene oxide (PEO), where both contained varying levels (up to 30 wt %) of ceramic composed of biphasic calcium phosphates, hydroxyapatite (HA)/ß-tricalcium phosphate (TCP). Using a model protein, lysozyme, we compared two methods of protein incorporation, adsorption and emulsion electrospinning. Adsorption of lysozyme on scaffolds with ceramic resulted in minimal release of lysozyme over time. Using emulsion electrospinning, lysozyme released from scaffolds containing a high concentration of ceramic where the majority of the release occurred at later time points. We investigated the effect of reducing the electrostatic interaction between the protein and the ceramic on protein release with the addition of the cationic surfactant, cetyl trimethylammonium bromide (CTAB). In vitro release studies demonstrated that electrospun scaffolds prepared with CTAB released more lysozyme or PDGF-BB compared with scaffolds without the cationic surfactant. Human mesenchymal stem cells (MSCs) on composite scaffolds containing PDGF-BB incorporated through emulsion electrospinning expressed higher levels of osteogenic markers compared to scaffolds without PDGF-BB, indicating that the bioactivity of the growth factor was maintained. This study revealed methods for incorporating growth factors in polymer/ceramic scaffolds to promote osteoinduction and thereby facilitate bone regeneration.

An investigation of common crosslinking agents on the stability of electrospun collagen scaffolds.

Electrospinning is a widely used processing method to form fibrous tissue engineering scaffolds that mimic the structural features of the native extracellular matrix. Electrospun fibers made of collagen have been sought because it is a natural structural protein that supports cell attachment and growth. Yet, conventional solvents used to electrospin collagen can result in the loss of hydrolytic stability and fiber morphology of the scaffold. This study evaluated the effect of commonly used synthetic and natural crosslinking agents, genipin, glutaraldehyde, N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride (EDC), and EDC with N-hydroxysulfosuccinimide (EDC-NHS), on electrospun collagen. Crosslinked collagen scaffolds were assessed for structural integrity in an in vitro immersion study for up to 3 months. Their cytocompatibility was evaluated by human mesenchymal stem cell morphology and proliferation. Our results showed that dimensional stability and cytocompatibility of crosslinked electrospun collagen scaffolds are dependent on the type of crosslinking agent used. Collagen scaffolds treated with EDC and EDC-NHS were structurally stable and retained fiber structure for up to 3 months and were cytocompatible. Therefore, EDC and EDC-NHS are favorable crosslinking agents for electrospun collagen that can be utilized in tissue engineering applications.

Evaluating apatite formation and osteogenic activity of electrospun composites for bone tissue engineering.

Significant interest has been in examining calcium phosphate ceramics, specifically ß-tricalcium phosphate (ß-TCP) (Ca3 (PO4)2 ) and synthetic hydroxyapatite (HA) (Ca10 (PO4)6 (OH)2 ), in composites and more recently, in fibrous composites formed using the electrospinning technique for bone tissue engineering applications. Calcium phosphate ceramics are sought because they can be bone bioactive, which means an apatite forms on their surface that facilitates bonding to bone tissue, and are osteoconductive. However, studies examining the bioactivity of electrospun composites containing calcium phosphates and their corresponding osteogenic activity have been limited. In this study, electrospun composites consisting of (20/80) HA/TCP nanoceramics and poly (ϵ-caprolactone) (PCL) were fabricated. Solvent and solvent combinations were evaluated to form scaffolds with a maximum concentration and dispersion of ceramic and pore sizes large enough for cell infiltration and tissue growth. PCL was dissolved in either methylene chloride (Composite-MC) or a combination of methylene chloride (80%) and dimethylformamide (20%; Composite-MC + DMF). Composites were evaluated in vitro for degradation, apatite formation, and osteogenic differentiation of human mesenchymal stem cells (MSCs) with an emphasis on temporal gene expression of osteogenic markers and the pluripotent gene Sox-2. Apatite formation and the osteogenic differentiation was the greatest for Composite-MC as determined by gene expression, protein production and biochemical markers, even without the presence of osteoinductive factors in the media, in comparison to Composite-MC + DMF and unfilled PCL mats. Sox-2 levels also reduced over time. The results of this study demonstrate that the solvent or solvent combination used in preparing the electrospun composite mats plays a critical role in determining their bioactivity which may, in turn, affect cell behavior.

Examining the formulation of emulsion electrospinning for improving the release of bioactive proteins from electrospun fibers.

Emulsion electrospinning has been sought as a method to prepare fibrous materials/scaffolds for growth factor delivery. Emulsion conditions, specifically sonication and the addition of a surfactant, were evaluated to determine their effect on the release and bioactivity of proteins from electrospun scaffolds. Polycaprolactone (PCL) and poly(ethylene oxide) (PEO/PCL) blends were evaluated where PEO, a hydrophilic polymer, was shown to enhance the incorporation of proteins. Electrospun scaffolds prepared with the addition of the nonionic surfactant Span® 80 at a concentration greater than the critical micelle concentration followed by mild sonication (10% amplitude) released lysozyme, the model protein, with a higher level of bioactivity as compared with other surfactant and sonication conditions. These conditions were then used to prepare emulsions of platelet-derived growth factor-BB (PDGF-BB) in PEO/PCL blends. Electrospun mats prepared by emulsions consisting of PDGF-BB incorporated with Span® 80 and sonicated at 10% amplitude exhibited a controlled release of PDGF-BB over 96 h as compared with a more rapid release from solutions that were not emulsified (Direct Addition) or emulsions that did not receive Span® 80 or sonication. Bioactive PDGF-BB incorporated in electrospun scaffolds enhanced the osteogenic differentiation of human mesenchymal stem cells as evidenced by increased alkaline phosphatase activity, improved cell attachment and reorganized cytoskeletal filaments. The findings in this study provide improved methods for achieving controlled release of bioactive proteins from electrospun materials.

Structural changes in PVDF fibers due to electrospinning and its effect on biological function.

Polyvinylidine fluoride (PVDF) is being investigated as a potential scaffold for bone tissue engineering because of its proven biocompatibility and piezoelectric property, wherein it can generate electrical activity when mechanically deformed. In this study, PVDF scaffolds were prepared by electrospinning using different voltages (12-30 kV), evaluated for the presence of the piezoelectric ß-crystal phase and its effect on biological function. Electrospun PVDF was compared with unprocessed/raw PVDF, films and melt-spun fibers for the presence of the piezoelectric ß-phase using differential scanning calorimetry, Fourier transform infrared spectroscopy and x-ray diffraction. The osteogenic differentiation of human mesenchymal stem cells (MSCs) was evaluated on scaffolds electrospun at 12 and 25 kV (PVDF-12 kV and PVDF-25 kV, respectively) and compared to tissue culture polystyrene (TCP). Electrospinning PVDF resulted in the formation of the piezoelectric ß-phase with the highest ß-phase fraction of 72% for electrospun PVDF at 25 kV. MSCs cultured on both the scaffolds were well attached as indicated by a spread morphology. Cells on PVDF-25 kV scaffolds had the greatest alkaline phosphatase activity and early mineralization by day 10 as compared to TCP and PVDF-12 kV. The results demonstrate the potential for the use of PVDF scaffolds for bone tissue engineering applications.