Stress Distribution of Endodontically Treated Tooth MOD Cavity Restored with Ribbon Fiber-Reinforced Composite (Wallpapering Technique) Using Finite Element Method.

Purpose: This research aimed to describe the stress distribution of an endodontically treated tooth with a mesio-occluso-distal (MOD) cavity restored with direct composite reinforced with polyethylene and e-glass ribbon fiber. Methods: This research was a descriptive study using the finite element method. A 3D model of the mandibular first molar solid after endodontic treatment with class II MOD preparation was prepared using Solidworks software. Finite element simulation was carried out using Abaqus software. In the first simulation, 180 N force was applied (vertically 90° perpendicular to the occlusal surface) at four points of loading: the tip of the mesiobuccal and distobuccal cusp, central fossa, and distal marginal ridge. For the second simulation, a 100 N force was applied at a 45° lateral angle to the occlusal surface at two loading points: the lingual slope of the mesiobuccal and distobuccal cusp. Results: This study showed that the stress concentration was located in the occlusal pit and fissure, CEJ distal area, bifurcation in dentin, and the 1/3 cervical area of root dentin. The stress value generated after vertical and lateral force did not exceed the tooth and restoration's compressive and tensile strength value. The failure occurred at the interface of enamel and composite near the loading point area due to vertical load, both on polyethylene and e-glass fiber ribbon-reinforced composite restoration. Stress distribution of an endodontically treated tooth with a MOD cavity restored with ribbon fiber-reinforced composite using the finite element method showed that the highest stress concentration occurred on the surface close to the loading point, in narrow, concave, and sharp areas, and more apically for endodontically treated teeth. Conclusion: Neither the tooth nor restoration failed after vertical and horizontal loads. The interface between enamel and composite on the occlusal surface failed.

Stress Analysis on Mesiolingual Cavity of Endodontically Treated Molar Restored Using Bidirectional Fiber-Reinforced Composite (Wallpapering Technique).

Introduction: Endodontically treated teeth (ETT) undergo extensive structure change and experience high stress during biomechanical function. Stress distribution is influenced by the restoration material and the type of bond between material and tooth structure. The selection of materials that can distribute stress will affect the resistance and retention of ETT to mastication forces, thus biomechanical functions were achieved. Composite has mechanical properties similar to dentin, it can transmit and distribute stresses throughout the tooth surface. The disadvantage of composites in large cavities is their lack of toughness. The addition of fiber to composites can increase their toughness. Purpose: This research is to determine the stress distribution of a fiber-reinforced composite made of polyethylene and e-glass on the mesiolingual cavity of ETT. Materials and Methods: A three-dimensional model of the mandibular molar was prepared for cavity preparation and the formation of restorations using SolidWorks 2021. The models were analyzed with Abaqus 2020 to determine stress concentrations after given vertical and oblique loading. Results: The maximum and minimum principal stress data were obtained to assess material resistance and interfacial damage criterion. Polyethylene fiber shows a more homogeneous stress distribution because the modulus of elasticity is close to the dentin and has a thickness that can reduce the volume of the composite. The E-glass shows the stress concentration on the circumferential fiber and cavity floor. Conclusion: The stress distribution of fiber-reinforced composite on the buccolingual cavity of ETT using the finite element method did not show structural failure in the polyethylene group because the maximum and minimum principal stresses were lower than the strength of the material. Interfacial bond failure occurs at the enamel portion. The maximum and minimum principal values of e-glass indicate structural failure in the circumferential fiber and the base fiber because the stress exceeds the strength of the material. Interfacial bond failure occurred on the circumferential and the cavity floor.

Risk factors for dental caries: A case study in peatlands and non-peatlands of West Kalimantan, Indonesia.

The prevalence of dental caries in peatlands and non-peatlands in West Kalimantan require preventive acts based on its natural conditions and the behavior of local communities. The objective was to analyse risk factors for dental caries in communities living in peatlands and non-peatlands in West Kalimantan. The research is a causal comparative study with cross-sectional approach. The samples were chosen by purposive sampling technique among adolescents aged 17-27 years, who were domiciled in Pontianak City (peatland) and Bengkayang (non-peatland) all their lives. The results showed that dental caries is significantly correlated with debris in peatlands (rs = 0.289). On non-peatlands, dental caries is correlated with drinking water phosphate (rs = 0.313) and calculus (rs = 0.034). In West Kalimantan, dental caries is significantly correlated with drinking water minerals (fluoride rs = -0.243; phosphate rs = 0.260), drinking water pH (rs = 0.235), behavior (rs = -0.327), and debris (rs = 0.240). The risk factors for dental caries in peatlands and non-peatlands in West Kalimantan are pH and drinking water minerals (fluoride and calcium), debris, calculus, and behavior.

Effect of Drinking Water Fluoride on Gingivitis and Caries: A Study in Peat and Non-Peat Land: A Comparative Cross-Sectional Study.

Aim: Humans get fluoride from food and water available in their environment. The source of clean water in peatlands comes from rainwater with a low mineral content, especially fluoride. The objective of this study was to investigate the correlation between the fluoride level in drinking water and salivary fluoride levels, as well as their potential impact on dental and oral health conditions. Materials and Methods: It is a causal-comparative study with a cross-sectional approach at the Health Polytechnics of Pontianak and Yogyakarta. The population were indigenous people in peat land (Pontianak) and non-peat land (Yogyakarta). The data were pH and mineral content in drinking water, saliva, the number of Streptococcus mutans colonies, dental caries rates, and gingivitis. Results: Drinking water fluoride is only significantly correlated with salivary fluoride on non-peat land. If these data are combined, it can be seen that drinking water fluoride is positively correlated (P < 0.05; CI 95%) with pH water, fluoride water, and pH saliva. Increased levels of fluoride in drinking water were negatively correlated with gingivitis, dental caries, and S. mutans. Conclusion: Drinking water fluoride is negatively correlated with dental caries and gingivitis in peatland and non-peatland communities, but would be significantly associated with dental caries and gingivitis if both peatland and non-peatland data were analyzed together. This is due to the low content of fluoride in the drinking water of peatland. Therefore, it is necessary to add fluoride gel to the teeth to prevent the development of dental caries.

Spatial ability and anatomy learning performance among dental students.

PURPOSE: Spatial perception is an essential skill for professional dentists. The objective of this study was to observe the spatial ability, as well as anatomy module grades, of dental students at a dental education center in Indonesia and relate these to gender and cohort. METHODS: A cross-sectional study was carried out where dental students in years (cohorts) 1, 2, 4-6 were invited to take the Revised Purdue Spatial Visualization Test (PSVT-R) and the redrawn Vandenberg and Kuse Mental Rotation Test (MRT) in order to assess spatial ability. In addition, the 1st- and 2nd-year dental students carried out gross anatomy assessments. Spatial ability test results were compared using an independent t-test to detect gender differences, one-way analysis of variance to inspect cohort differences, and correlation relative to anatomy module scores. RESULTS: A total of 326 dental students voluntarily participated. Statistically significant gender differences were found in both spatial ability tests in the overall sample (PSVT-R: p<0.001; MRT: p=0.001). When the 1st- and 2nd-year dental students were pooled, significant gender differences were detected, in which males scored higher than females in both spatial ability tests (PSVT-R: p<0.001; MRT: p=0.003). In anatomy, however, females scored higher than the males (p=0.005). In addition, there were weak to moderate, but significant correlations between spatial ability tests and anatomy scores. CONCLUSION: This study indicated that spatial ability may not be the only factor predicting the academic performance of dental students. However, dental students with low spatial ability scores may need supplementary educational techniques when learning specific spatial tasks.

Psychometric analysis and reliability of the dental treatment motivation scale for Indonesian pregnant women.

This study aimed to obtain the results of psychometric analysis and reliability of the dental treatment motivation scale (DTMS), which was adapted cross-culturally for pregnant women in Indonesia. A descriptive survey was conducted with 149 pregnant women at a maternal clinic in Bandung City, Indonesia, in December 2020. Convenience sampling was chosen as the sampling technique after the inclusion and exclusion criteria had been fulfilled. Two English experts initially translated the DTMS questionnaire from English into Indonesian and the translated questionnaire was then reviewed by four expert panels, which were modified afterwards. The validity test was carried out using the exploratory and confirmatory factor analyses and goodness of fit index (GFI). The internal reliability analysis used Cronbach's alpha, and the test-retest was conducted using Pearson's correlation coefficient. The psychometric analysis results were obtained from four testing stages. The first stage was the initial eigenvalue assessment, and the cumulative percentage value was >60%. The second stage was the exploratory factor analysis, with a loading factor of >0.3. The third stage consisted of the confirmatory factor analysis, forming two components of the factor structure (intrinsic and extrinsic motivations). Finally, the fourth stage was the GFI assessment, which showed the good fit model with a value of 0.903. Very high internal consistency reliability ranged from 0.985 to 0.990; the test-retest p-value of Pearson's correlation coefficient was 0.000. In conclusion, the Indonesian version of the DTMS proved to be a reliable and valid instrument to measure Indonesian pregnant women's motivation to seek oral health treatment.

Psychometric analysis and reliability of the dental treatment motivation scale for Indonesian pregnant women

Abstract: This study aimed to obtain the results of psychometric analysis and reliability of the dental treatment motivation scale (DTMS), which was adapted cross-culturally for pregnant women in Indonesia. A descriptive survey was conducted with 149 pregnant women at a maternal clinic in Bandung City, Indonesia, in December 2020. Convenience sampling was chosen as the sampling technique after the inclusion and exclusion criteria had been fulfilled. Two English experts initially translated the DTMS questionnaire from English into Indonesian and the translated questionnaire was then reviewed by four expert panels, which were modified afterwards. The validity test was carried out using the exploratory and confirmatory factor analyses and goodness of fit index (GFI). The internal reliability analysis used Cronbach's alpha, and the test-retest was conducted using Pearson's correlation coefficient. The psychometric analysis results were obtained from four testing stages. The first stage was the initial eigenvalue assessment, and the cumulative percentage value was >60%. The second stage was the exploratory factor analysis, with a loading factor of >0.3. The third stage consisted of the confirmatory factor analysis, forming two components of the factor structure (intrinsic and extrinsic motivations). Finally, the fourth stage was the GFI assessment, which showed the good fit model with a value of 0.903. Very high internal consistency reliability ranged from 0.985 to 0.990; the test-retest p-value of Pearson's correlation coefficient was 0.000. In conclusion, the Indonesian version of the DTMS proved to be a reliable and valid instrument to measure Indonesian pregnant women's motivation to seek oral health treatment.

Acceptance of Leadership Empowerment Efforts for Female Employees in Three Dental Hospitals.

INTRODUCTION: Empowerment is an organisational effort in increasing the willingness and ability of employees to be more independent in performing their duties. Employee leadership empowerment substantially increases motivation, performance, and commitment to the organisation. Leadership empowerment includes self-determination, competence, meaning, and impact. The purpose of this study was to determine the acceptance of leadership empowerment efforts for female employees in three dental hospitals in Bandung. METHODS: A descriptive survey was conducted and the study population was dental hospitals in Bandung. The exclusion criteria were dental hospitals which unwillingly followed the research. The inclusion criteria were dental hospitals that have empowered female employees. The data collection technique was performed with total sampling. The research sample amounted to 102 people from three dental hospitals-all data were collected using a validated questionnaire. Data analysis was performed using relative frequency distribution. RESULTS: Leadership empowerment for female employees in three dental hospitals in Bandung has been given by each. The highest acceptance of empowerment efforts for female employees was shown by employees of Dental Hospital of Jenderal Achmad Yani University, followed by Dental Hospital of Universitas Padjadjaran, and subsequently Dental Hospital of Maranatha Christian University. The level of acceptance of empowerment efforts that need to be improved in three Dental Hospitals in Bandung was self-determination or autonomy at work. Employees must be given more freedom on performing their duties, developing their careers, and acting more independently. CONCLUSION: Acceptance of leadership empowerment for female employees in three dental hospitals in Bandung has been demonstrated in each. Acceptance of leadership empowerment efforts in all subdimensions of empowerment needs to be improved, primarily related to self-determination.

Matrix levels of metalloproteinase-2 (MMP-2) and toxicity evaluation of carbonate apatite-based endodontic sealer in rat subcutaneous implantation.

OBJECTIVE: The aims of this study is to investigate the matrix metalloproteinase-2 (MMP-2) levels and the toxicity evaluation to determine the safety of carbonate apatite material that will be used as an endodontic sealer. METHODS: Carbonate apatite as endodontic sealer material is fabricated with a size of 2 × 2 × 1 mm, sterilized, and then implanted in the subcutaneous area on the murine back. Total of 28 rats was divided into 2 groups: the implantation group and the control group (positive and negative). We observed behavior, macroscopic and microscopic images (through hematoxylin-eosin/HE staining) and MMP-2 levels in the serum (through ELISA examination) to determine the reaction of implant material in experimental animals. RESULTS: Behavioral test shows impaired motor function within 2-24 h in all rats, autonomic behavioral test does not show any disturbance, macroscopic images show appearance of tumor and rubor within 2-72 h in all rats, microscopic images shows an increase in the mean neutrophils number with the highest point located in the 24 h (3.92×103/µL) and lymphocytes with the highest point in the 14 days (15.31×103/µL). The average value of MMP-2 levels of the negative control group was 1.33 ng/ml, 1.29 ng/ml of the positive control group, and 7.32 ng/ml of the implantation group. Level of MMP-2 in rats with visible implants increased on day 3 (0.75 ng/ml), day 10 (1.49 ng/ml) and day 14 (17.67 ng/ml). CONCLUSION: The implantation of carbonate apatite material did not cause behavioral disorders or abnormalities in the tissues surrounding of the implant site and did not show signs of toxicity or death.