Template-free efficacious morphology of electrosynthesized polyaniline/ß-cyclodextrin host-guest complex on Au/rGO modified electrode for removal and recovery of rare-earth and heavy elements from seawater.

Global water pollution and scarcity of water resources are turning increasingly into serious threats to the survival of all living organisms on Earth. This study offers an influent strategy for the electrosynthesis of reduced graphene oxide/polyaniline/ß-cyclodextrin (rGO/PAni/ßCD) nanocomposite and its application to the removal/recovery of heavy elements (HEs) and rare-earth elements (REEs). Besides physicochemical and electrochemical studies, the surface morphological and statistical properties of fabricated nanocomposite electrode were examined. The textural and morphological characteristics of nanocomposite electrode were investigated via AFM data based on statistical, stereometric, and fractal theory. The cohesive, porous, and well-developed morphology of fabricated nanocomposite electrode has enabled the electrodeposition technique to achieve significant simultaneous removal/recovery efficiency of HE and REE ions such as Pb(II), Cu(II), Cd(II), Hg(II), Ce(IV), and Nb(V). Therefore, using rGO/PAni/ßCD, considerable removal of HEs and REEs was achieved under optimized pH, 0.1 M KNO3, and 35 mg L-1 metal ion initial concentration during 20 min. Removal capacity of the nanocomposite electrode is preserved subsequent to 10 cycles of electrodeposition/desorption, according to the desorption investigation through eluted adsorbent at time intervals in deionized water and adjusted acidic pH values. Then, using rGO/PAni/CD nanocomposite, simulated seawater remediation was accomplished successfully. This interdisciplinary approach reveals that the removal/recovery efficiency enhance linearly along with the improvement of well-developed morphology for electrosynthesized composites. Thus, these results suggest how the morphological features of the polymer composites could improve remediation of water resources.

Anodic electrosynthesis of MIL-53(Al)-N(CH2PO3H2)2 as a mesoporous catalyst for synthesis of novel (N-methyl-pyrrol)-pyrazolo[3,4-b]pyridines via a cooperative vinylogous anomeric based oxidation.

In this paper, the MIL-53(Al)-NH2 metal-organic frameworks (MOFs) was prepared based on the anodic electrosynthesis under green conditions. The anodic electrosynthesis as an environmentally friendly procedure was performed in the aqueous solution, room temperature, atmospheric pressure, and in the short reaction time (30 min). Also, the employed procedure was accomplished without the need for the ex-situ salt and base/probase additives as cation source and ligand activating agent at the constant current mode (10.0 mA cm-2). The electrosynthesized MOFs was functionalized with phosphorus acid tags as a novel mesoporous catalyst. This mesoporous catalyst was successfully employed for synthesis of new series (N-methyl-pyrrol)-pyrazolo[3,4-b]pyridines by one-pot condensation reaction of 3-methyl-1-phenyl-1H-pyrazol-5-amine, 3-(1-methyl-1H-pyrrol-2-yl)-3-oxopropanenitrile and various aromatic aldehydes (mono, bis and tripodal). This catalyst proceeded the organic synthetic reaction via a cooperative vinylogous anomeric based oxidation mechanism with a marginal decreasing its catalytic activity after recycling and reusability.

Synthesis and application of [Zr-UiO-66-PDC-SO3H]Cl MOFs to the preparation of dicyanomethylene pyridines via chemical and electrochemical methods.

A metal-organic framework (MOF) with sulfonic acid tags as a novel mesoporous catalyst was synthesized. The precursor of Zr-UiO-66-PDC was synthesized both via chemical and electrochemical methods. Then, zirconium-based mesoporous metal-organic framework [Zr-UiO-66-PDC-SO3H]Cl was prepared by reaction of Zr-UiO-66-PDC and SO3HCl. The structure of [Zr-UiO-66-PDC-SO3H]Cl was confirmed by FT-IR, PXRD, FE-SEM, TEM, BET, EDX, and Mapping analysis. This mesoporous [Zr-UiO-66-PDC-SO3H]Cl was successfully applied for the synthesis of dicyanomethylene pyridine derivatives via condensation of various aldehyde, 2-aminoprop-1-ene-1,1,3-tricarbonitrile and malononitrile. At the electrochemical section, a green electrochemical method has successfully employed for rapid synthesis of the zirconium-based mesoporous metal-organic framework UiO-66-PDC at room temperature and atmospheric pressure. The synthesized UiO-66-PDC has a uniform cauliflower-like structure with a 13.5 nm mean pore diameter and 1081.6 m2 g-1 surface area. The described catalyst [Zr-UiO-66-PDC-SO3H]Cl was also employed for the convergent paired electrochemical synthesis of dihydropyridine derivatives as an environmentally friendly technique under constant current at 1.0 mA cm-2 in an undivided cell. The proposed method proceeds with moderate to good yields for the model via a cooperative vinylogous anomeric based oxidation.

Label-free E-DNA biosensor based on PANi-RGO-G*NPs for detection of cell-free fetal DNA in maternal blood and fetal gender determination in early pregnancy.

In this study, a DYS14 aptamer/polyaniline-reduced graphene oxide-gold nanoparticles/gold (Apt/PANi-RGO-G*NPs/Au) electrode was fabricated to detect the Y-chromosome DYS14 DNA sequence in cffDNA in the blood plasma of pregnant women and used on real and laboratory samples with high success rate. The electrochemical properties of the prepared E-DNA biosensor were characterized by CV, SWV, XRD, and EIS. The E-DNA biosensor morphological characteristics were investigated by TEM, SEM, and EDX. Phosphorothioate was used to link the aptamer to PANi-RGO-G*NPs modified gold electrode. This is due to control of the adsorption polarity and increase adsorption stability. Under optimized conditions, the linear range of the analytical technique with respect to the logarithm of the target sequence concentration was 1.0 × 10-16-1.0 × 10-8 M, the detection limit was 4.26 × 10-17 M, and the limit of quantitation was 1.422 × 10-16 M. The E-DNA biosensor displayed high selectivity and sensitivity, high efficiency, and acceptable repeatability. For fetal sex detection, 12 pregnant women from the 5th to the 15th week of gestation participated in the study. Results indicated the fabricated Apt/PANi-RGO-G*NPs/Au E-DNA biosensor to be appropriate for fetal sex determination in pregnant women between the 7th and 9th week of gestation. Notably, this method can be used as a model for the study of pathogens like bacteria and viruses.

In situ Raman and UV-vis spectroscopic studies of polypyrrole and poly(pyrrole-2,6-dimethyl-ß-cyclodextrin).

Polypyrrole (PPy) and poly(pyrrole-2,6-dimethyl-ß-cyclodextrin) [P(Py-ß-DMCD)] films prepared by potential cycling in aqueous acidic solutions on indium tin oxide (ITO)-coated glass and gold electrodes were studied by in situ UV-vis and Raman spectroscopy. Characteristic UV-vis and Raman bands were identified and their dependencies on the electrode potential have been discussed. Spectroelectrochemical results reveal differences both in the position of the spectral bands and their potential dependence for PPy and P(Py-ß-DMCD) films indicating interactions between polymer chains and CDs during electropolymerization process. The films were also characterized by cyclic voltammetry and FT-IR spectroscopy.