ABSTRACT
A method to extract accurate information on the displacement field distribution from split high-order Laue zones lines in a convergent-beam electron diffraction pattern of nanostructures has been developed. Starting from two-dimensional many beam dynamical simulation of HOLZ patterns, we assembled a recursive procedure to reconstruct the displacement field in the investigated regions of the sample, based on the best fit of a parametrized model. This recursive procedure minimizes the differences between simulated and experimental patterns, taken in strained regions, by comparing the corresponding rocking curves of a number of high-order Laue zone reflections. Due to its sensitivity to small displacement variations along the electron beam direction, this method is able to discriminate between different models, and can be also used to map a strain field component in the specimen. We tested this method in a series of experimental convergent-beam electron diffraction patterns, taken in a shallow trench isolation structure. The method presented here is of general validity and, in principle, it can be applied to any sample where not negligible strain gradients along the beam direction are present.
ABSTRACT
The convergent beam electron diffraction technique (CBED) of the transmission electron microscopy (TEM) has been employed to determine the strain distribution along a cutline parallel to the padoxide/Si interface in a 0.80 micron wide recessed-LOCOS structure. The values of the components of the strain tensor so obtained have been compared with those computed by two simulator codes. It has been found that both the LOCOS morphology and the strain distribution deduced from TEM images and TEM/CBED patterns, respectively, were in agreement with the simulation results, if some oxidation-related parameters were modified.
ABSTRACT
The Large Angle Convergent Beam Electron Diffraction (LACBED) technique has been applied to determination of the tetragonal mismatch in coherent Si/Si1-xGex/Si heterostructures. Two-dimensional (2D) dynamical simulation of the LACBED patterns has been performed and compared with the corresponding experimental ones. A good agreement is found in the whole simulated area, particularly as regards the splitting of the Bragg contours, due to the strain field present in the TEM cross-sections.
ABSTRACT
In this work we present some recent results concerning the alpha-particles irradiation of Si1-yCy alloy epitaxially grown on silicon. The study of the damage process is interesting because of the extensive use of backscattering technique as a tool of characterisation of this kind of materials and because of the possibility of adding information about the transformations that this metastable material undergoes. We point out that the irradiation damage process causes a change in the material structure different from that due to the thermal treatments. The irradiation damage occurs at a rate much higher than in Si, however it involves only a silicon atom fraction that appears to be proportional to the substitutional carbon content.
