ABSTRACT
BACKGROUND: Pitting damage on implants has been reported and attributed to the use of electrocautery. This study aimed to determine how different total knee arthroplasty bearing surfaces are susceptible to this type of damage and whether surgeons are aware that this damage can occur. METHODS: A survey was sent to Hip and Knee Society members to determine what percentage of adult reconstructive surgeons use electrocautery after implantation of components. Three bearing surfaces for total knee arthroplasty were selected: cobalt chromium, Oxinium, and zirconium nitride to be damaged by electrocautery with a monopolar (MP) and bipolar (BP) electrocautery with 3 different energy settings. A comparison of surface damage using scanning electron microscopy and elemental differences using energy dispersion spectroscopy was performed. Average roughness (Ra), maximal peak-to-valley height (Rz), kurtosis (Rk), and skewness (Rsk) were recorded for comparison using a profilometer was performed. RESULTS: Median Rz and Ra measurements were larger for BP damaged areas compared to MP for all bearing surfaces. The Oxinium surface had the greatest increase in roughness parameters. Survey results indicate that a significant percentage of adult reconstructive surgeons use the electrocautery after implants are in place and are not aware of this type of damage. Backscatter scanning electron microscopy analysis found significant changes for BP damage compared to MP. CONCLUSION: Surface damage caused by electrocautery can have significant effects on the bearing surfaces of implants but further study needs to be performed to determine if this is a clinical issue. Our survey determined that many arthroplasty experts are unaware that this damage can occur.
Subject(s)
Arthroplasty, Replacement, Knee , Knee Prosthesis , Adult , Arthroplasty, Replacement, Knee/adverse effects , Chromium Alloys , Electrocoagulation/adverse effects , Humans , Knee Joint/surgery , Knee Prosthesis/adverse effects , Prosthesis DesignABSTRACT
BACKGROUND: Total knee arthroplasty (TKA) with posterior-stabilized (PS) or posterior cruciate-retaining (CR) implants has high success rates and survivorship. However, it is uncertain how laxity and constraint are associated with long-term polyethylene wear under physiological conditions. METHODS: To answer this question, we measured the laxity patterns of 47 harvested cadaver specimens with primary TKAs in a custom knee-testing machine at full extension and at 30°, 60°, and 90° of flexion. The wear patterns of the tibial inserts were assessed using a semiquantitative method which is a modified approach of that proposed by Hood et al in 1983. RESULTS: Statistical analysis found that the PS TKA cohort had a statistically significant increase in varus laxity at 60° and 90° of flexion, as well as total coronal laxity at 60° of flexion when compared to the CR cohort. Furthermore, analysis demonstrated a significant correlation between increased PS coronal laxity and increased tibial wear, a trend that was not seen in the CR specimens. CONCLUSION: Our findings suggest that greater laxity in flexion after primary TKA may increase the wear realized over time and that PS TKAs may be more susceptible due to the loss of support the PCL affords to the flexion space. Whether a CR or PS TKA is used, surgeons need to avoid the pitfalls that may create greater flexion laxity during the procedure to optimize long-term polyethylene wear.
Subject(s)
Arthroplasty, Replacement, Knee , Knee Prosthesis , Posterior Cruciate Ligament , Biomechanical Phenomena , Cohort Studies , Humans , Knee Joint/surgery , Posterior Cruciate Ligament/surgery , Range of Motion, Articular , Tibia/surgeryABSTRACT
BACKGROUND: The purpose of this study is to determine the preferred sampling location for tissue analysis in total knee arthroplasty (TKA) and to evaluate metal concentrations, inflammatory cytokines, component damage, and tissue metallosis. METHODS: Twenty TKA systems were collected at necropsy along with tissue samples from 5 distinct locations. Inductively coupled plasma mass spectrometry (ICP-MS) analysis was performed to determine cobalt (Co), chromium (Cr), and titanium (Ti) concentrations. Synovial fluid cytokine analysis was preformed using a Magnetic Luminex Screening Assay. Femoral components were assesed for damage and tissues were visually scored for metallosis. RESULTS: The median metal concentrations were 16 ppb for Co, 46 ppb for Cr, and 9.8 ppb for Ti. There was no association between the tissue collection site and the metal concentration for Co (P = .979), Cr (P = .712), or Ti (P = .854). Twelve of 20 of the necropsy-retrieved TKAs had metallosis, but there was no correlation between Co (P = .48), Cr (P = .89), or Ti (P = .60) concentration and metallosis. Increased Co was associated with decreased tumor necrosis factor alpha (ρ = -0.56, P = .01) and interleukin 1 beta (ρ = -0.48, P = .03). Increased Cr was associated with decreased tumor necrosis factor alpha (ρ= -0.47, P = .03), interleukin 6 (ρ= -0.43, P = .04), and macrophage inflammatory protein 3 alpha (ρ= -0.47, P = .03). CONCLUSION: We observed elevated Co, Cr, and Ti concentrations in tissue from necropsy-retrieved TKA. Our findings did not support the hypothesis that tissue metal concentrations were associated with inflammatory cytokines. The results of this research will be useful for the design of future prospective studies.
Subject(s)
Arthroplasty, Replacement, Knee , Arthroplasty, Replacement, Knee/adverse effects , Chromium , Cobalt , Humans , Metals , Prospective StudiesABSTRACT
Recently, inflammatory cell-induced corrosion (ICIC), a unique type of damage, has been reported in cobalt-chromium (CoCr) implants, but the mechanism remains poorly understood and controversial because electrocautery damage has also been shown to produce similar findings. This study aimed to distinguish between these two damage mechanisms. Forty-one CoCr primary total knee arthroplasty specimens were collected at time of necropsy. After removal and cleaning, light microscopy was used to identify areas of ICIC-like damage scars. A CoCr knee implant was intentionally damaged by electrocautery from both Bovie and Aquamantys sources using a 3-second hover method with 3 different energy settings for comparison to necropsy findings. Average roughness (Ra), max peak-to-valley height (Rmax), kurtosis (Rk), and skewness (Rsk) measurements were collected to represent the topography on the damaged areas for the CoCr implants. Necropsy implants showed signs of ICIC in 7 of 41 implants (17%) examined. Fe/C ratios of the Bovie electrocautery-damaged knee implant were shown to be statistically higher than those of necropsy-retrieved implants. Median Ra measurements were statistically less (P = 0.008) for Bovie-damaged areas compared to ICIC-dam-aged areas on CoCr. Median Rmax and Ra measurements were statistically less (P = 0.012, P < 0.001, respectively) for Aquamantys-damaged areas compared to ICIC-damaged areas on CoCr. While the visual patterns seen in necropsy-retrieved implants appeared similar to those with the intentionally damaged CoCrMo implant, the contents of the corroded regions are unique. The difference in roughness found on ICIC-damaged and electrocautery-damaged regions also indicates examination of surface topography as another distinguishing feature between the two mechanisms.
Subject(s)
Electrocoagulation/adverse effects , Knee Prosthesis , Macrophages/immunology , Neutrophils/immunology , Prosthesis Failure/etiology , Arthroplasty, Replacement, Knee , Cadaver , Chromium Alloys/analysis , Corrosion , Humans , Ions/immunology , Microscopy, Electron, Scanning , Spectrometry, X-Ray EmissionABSTRACT
Increased joint laxity is associated with excessive polyethylene wear, but the correlation between laxity and metal wear has not been established. Fifteen necropsy-retrieved primary total knee replacements were mounted into a custom knee-testing machine that measured anterior-posterior, varus-valgus, and internal-external rotational laxity at 0°, 30°, 60°, and 90° of flexion. Inductively coupled plasma-mass spectrometry analysis was performed to measure the cobalt (Co), chromium (Cr), and titanium (Ti) concentrations in periprosthetic tissue samples. Spearman's rank correlations were performed to determine whether a significant correlation (p < 0.05) existed between soft tissue laxity and tissue metal concentrations. At 0° flexion, decreased posterior displacement was negatively correlated with elevated Co and Cr concentrations. At 30° flexion, decreased external rotation and varus deflection was negatively correlated with elevated Ti concentrations. At 60° flexion, decreased anterior displacement was negatively correlated with elevated Cr concentrations and decreased varus deflection was negatively correlated with increased Ti concentrations. At 90° flexion, decreased anterior displacement was negatively correlated with elevated Co and Cr concentrations. To our knowledge, this is the first study to investigate the correlation between tissue metal concentration and laxity. Decreased laxity was associated with elevated metal concentrations in periprosthetic tissue.
Subject(s)
Joint Instability/complications , Knee Joint/chemistry , Knee Prosthesis/adverse effects , Metals/analysis , Aged , Aged, 80 and over , Arthroplasty, Replacement, Knee , Biomechanical Phenomena , Cadaver , Chromium/analysis , Cobalt/analysis , Female , Humans , Knee , Male , Middle Aged , Prosthesis Failure/etiology , Range of Motion, Articular , Rotation , Titanium/analysisABSTRACT
BACKGROUND: The purpose of this study was to determine the incidence of metal release in contemporary total knee arthroplasty and the patient-related factors associated with this release. METHODS: In total, 256 retrieved cobalt-chromium femoral components were collected through a multi-institutional orthopedic implant retrieval program (implanted: 1-15 years). Implants were mainly revised for loosening (84/256), instability (62/256), and infection (46/256). Third-body damage was assessed using a semiquantitative scoring method. Microscale electro-corrosion damage (MECD) was evaluated using digital optical microscopy. Radii of curvature were measured from representative components to calculate anterior-posterior and medial-lateral ratios. Femoral component surface roughness was measured using a white light interferometer. Using a multivariable linear model, associations between damage score, implant, and patient factors were tested. Spearman's ρ correlation tests were performed to determine the association between roughness measurements and damage score. RESULTS: Mild to severe damage was observed in 52% (134/256) of the components. In the multivariable linear model, anterior-posterior ratio (ß = -8.07; P < .001), loosening (ß = -0.52; P = .006), and patient weight (ß = 0.01; P = .007) were associated with damage score. Suspected MECD damage was observed in 82% (209/256) of components. The Ra value (ρ = 0.196; P = .002) and Rq value (ρ = 0.157; P = .012) increased as the damage score increased. CONCLUSION: The findings of this retrieval study support that similar damage mechanisms exist in contemporary and long-term total knee arthroplasty devices. Additionally, we observed associations between loosening, anterior-posterior conformity, and patient weight with increased surface damage.
Subject(s)
Arthroplasty, Replacement, Knee/instrumentation , Chromium Alloys , Knee Prosthesis/statistics & numerical data , Adult , Aged , Aged, 80 and over , Arthroplasty, Replacement, Knee/adverse effects , Chromium , Cobalt , Corrosion , Female , Femur/surgery , Humans , Knee Prosthesis/adverse effects , Male , Middle Aged , Prosthesis Design , Prosthesis FailureABSTRACT
BACKGROUND: Previous studies identified imprinting of the stem morphology onto the interior head bore, leading researchers to hypothesize an influence of taper topography on mechanically assisted crevice corrosion. The purpose of this study was to analyze whether microgrooved stem tapers result in greater fretting corrosion damage than smooth stem tapers. METHODS: A matched cohort of 120 retrieved head-stem pairs from metal-on-polyethylene bearings was created controlling for implantation time, flexural rigidity, apparent length of engagement, and head size. There were 2 groups of 60 heads each, mated with either smooth or microgrooved stem tapers. A high-precision roundness machine was used to measure and categorize the surface morphology. Fretting corrosion damage at the head-neck junction was characterized using the Higgs-Goldberg scoring method. Fourteen of the most damaged heads were analyzed for the maximum depth of material loss and focused ion beam cross-sectioned to view oxide and base metal. RESULTS: Fretting corrosion damage was not different between the 2 cohorts at the femoral head (P = .14, Mann-Whitney) or stem tapers (P = .35). There was no difference in the maximum depths of material loss between the cohorts (P = .71). Cross-sectioning revealed contact damage, signs of micro-motion, and chromium-rich oxide layers in both cohorts. Microgroove imprinting did not appear to have a different effect on the fretting corrosion behavior. CONCLUSION: The results of this matched cohort retrieval study do not support the hypothesis that taper surfaces with microgrooved stems exhibit increased in vivo fretting corrosion damage or material release.
Subject(s)
Hip Prosthesis/adverse effects , Prosthesis Design , Prosthesis Failure , Adult , Aged , Aged, 80 and over , Arthroplasty, Replacement, Hip/instrumentation , Chromium Alloys , Cohort Studies , Corrosion , Female , Femur Head/surgery , Humans , Male , Middle Aged , PolyethyleneABSTRACT
BACKGROUND: Metal debris and ion release has raised concerns in joint arthroplasty. The purpose of this study was to characterize the sources of metallic ions and particulate debris released from long-term (in vivo >15 years) total knee arthroplasty femoral components. METHODS: A total of 52 CoCr femoral condyles were identified as having been implanted for more than 15 years. The femoral components were examined for incidence of 5 types of damage (metal-on-metal wear due to historical polyethylene insert failure, mechanically assisted crevice corrosion at taper interfaces, cement interface corrosion, third-body abrasive wear, and inflammatory cell-induced corrosion [ICIC]). Third-body abrasive wear was evaluated using the Hood method for polyethylene components and a similar method quantifying surface damage of the femoral condyle was used. The total area damaged by ICIC was quantified using digital photogrammetry. RESULTS: Surface damage associated with corrosion and/or CoCr debris release was identified in 51 (98%) CoCr femoral components. Five types of damage were identified: 98% of femoral components exhibited third-body abrasive wear (mostly observed as scratching, n = 51/52), 29% of femoral components exhibited ICIC damage (n = 15/52), 41% exhibited cement interface damage (n = 11/27), 17% exhibited metal-on-metal wear after wear-through of the polyethylene insert (n = 9/52), and 50% of the modular femoral components exhibited mechanically assisted crevice corrosion taper damage (n = 2/4). The total ICIC-damaged area was an average of 0.11 ± 0.12 mm2 (range: 0.01-0.46 mm2). CONCLUSION: Although implant damage in total knee arthroplasty is typically reported with regard to the polyethylene insert, the results of this study demonstrate that abrasive and corrosive damage occurs on the CoCr femoral condyle in vivo.
Subject(s)
Arthroplasty, Replacement, Knee/instrumentation , Chromium , Cobalt , Knee Prosthesis/adverse effects , Prosthesis Failure/etiology , Adult , Aged , Corrosion , Female , Femur/surgery , Humans , Knee Joint/surgery , Male , Middle Aged , Polyethylene , Prosthesis Design , Young AdultABSTRACT
Cobalt-chromium-molybdenum (CoCrMo) alloy, used for over five decades in orthopedic implants, may corrode and release wear debris into the body during use. These degradation products may stimulate immune and inflammatory responses in vivo. We report here on evidence of direct inflammatory cell-induced corrosion of human implanted and retrieved CoCrMo implant surfaces. Corrosion morphology on CoCrMo implant surfaces, in unique and characteristic patterns, and the presence of cellular remnants and biological materials intimately entwined with the corrosion indicates direct cellular attack under the cell membrane region of adhered and/or migrating inflammatory cells. Evidence supports a Fenton-like reaction mechanism driving corrosion in which reactive oxygen species are the major driver of corrosion. Using in vitro tests, large increases in corrosion susceptibility of CoCrMo were seen (40-100 fold) when immersed in phosphate buffered saline solutions modified with hydrogen peroxide and hydrochloric acid to represent the chemistry under inflammatory cells. This discovery raises significant new questions about the clinical consequences of such corrosion interactions, the role of patient inflammatory reactions, and the detailed mechanisms at play.
Subject(s)
Corrosion , Inflammation/pathology , Orthopedics , Prostheses and Implants , Vitallium , Humans , Microscopy, Electron, Scanning , Reactive Oxygen Species/metabolismABSTRACT
The purpose of this study was to characterize the prevalence of taper damage in modular TKA components. One hundred ninety-eight modular components were revised after 3.9±4.2 years of implantation. Modular components were evaluated for fretting corrosion using a semi-quantitative 4-point scoring system. Design features and patient information were assessed as predictors of fretting corrosion damage. Mild-to-severe fretting corrosion (score ≥2) was observed in 94/101 tapers on the modular femoral components and 90/97 tapers on the modular tibial components. Mixed alloy pairs (p=0.03), taper design (p<0.001), and component type (p=0.02) were associated with taper corrosion. The results from this study supported the hypothesis that there is taper corrosion in TKA. However the clinical implications remain unclear.
Subject(s)
Arthroplasty, Replacement, Knee , Knee Prosthesis , Prosthesis Failure , Alloys , Corrosion , Device Removal , Humans , Prosthesis Design , ReoperationABSTRACT
The objective of this article is to provide an up-to-date overview of zirconia-toughened alumina (ZTA) components used in total hip arthroplasties. The structure, mechanical properties, and available data regarding the clinical performance of ZTA are summarized. The advancements that have been made in understanding the in vivo performance of ZTA are investigated. This article concludes with a discussion of gaps in the literature related to ceramic biomaterials and avenues for future research.