Efficacy of microchips and 3D sensors for orthodontic force measurement: A systematic review of in vitro studies.

OBJECTIVE: To evaluate the efficacy of microchips and 3D microsensors in the measurement of orthodontic forces. METHODS: Through September 2023, comprehensive searches were conducted on PubMed/MEDLINE, SCOPUS and SCIELO without restrictions. RESULTS: After removing duplicate entries and applying the eligibility criteria, 23 studies were included for analysis. All the studies were conducted in vitro, and slightly more than half of them were centred on evaluating orthodontic forces exerted by aligners. Eight utilized microchips as measurement tools, while the remaining studies made use of 3D microsensors for their assessments. In the context of fixed appliances, key findings included a high level of agreement in 3-dimensional orthodontic force detection between simulation results and actual applied forces. Incorporating critical force-moment combinations during smart bracket calibration reduced measurement errors for most components. Translational tooth movement revealed a moment-to-force ratio, aligning with the bracket's centre of resistance. The primary findings in relation to aligners revealed several significant factors affecting the forces exerted by them. Notably, the foil thickness and staging were found to have a considerable impact on these forces, with optimal force transmission occurring at a layer height of 150 µm. Furthermore, the type of material used in 3D-printing aligners influenced the force levels, with attachments proving effective in generating extrusive forces. Deliberate adjustments in aligner thickness were observed to alter the forces and moments generated. CONCLUSIONS: Microchips and 3D sensors provide precise and quantitative measurements of orthodontic forces in in vitro studies, enabling accurate monitoring and control of tooth movement.

Smile Aesthetics Assessment in Patients Undergoing the Finishing Phase of Orthodontic Treatment: An Observational Cross-Sectional Study.

Objective To describe the smile characteristics of patients entering the finishing phase of orthodontic treatment. Methods This observational study involved a non-probabilistic sample of 48 patients. Clinical records served as the basis for determining the type of treatment (with or without extractions). Photographs were analyzed to obtain smile variables. Dental casts and panoramic radiographs were evaluated to ascertain the cast-radiograph evaluation (CRE) index. Univariate and bivariate analyses were conducted at a significance level of 0.05. Results The study evaluated 24 men and 24 women, with an average age of 20.10 ± 6.78 years. Fifty percent of the patients did not undergo extractions, and the average CRE index for the sample was 34.83 ± 9.01. Regarding the smile, a medium smile line was prevalent in 66.7% of cases, and a non-consonant smile arc was observed in 58.3%. Significant differences in the smile arc were found between patients with and without extractions (p=0.019). Right and left buccal corridors measured 2.52 mm ± 1.52 and 2.43 mm ± 1.37, respectively. The upper dental midline deviated by 0.80 ± 0.91 mm and had an angulation of 1.65 ± 2.05º. Both variables showed significant differences between Class I and Class II patients (p=0.020; p=0.027). Symmetrical smiles were also observed (1.05 ± 0.17). Conclusions Based on our findings, clinicians should focus on the smile arc in patients who have not undergone extractions and on the midline inclination in Class II patients. These appear to be the most common areas for improvement in patients who are in the finishing phase of treatment. Additionally, considerable variability exists in the smile characteristics of patients still undergoing orthodontic treatment, leaving room for further enhancement of results.

Antibiotic resistance in periodontitis patients: A systematic scoping review of randomized clinical trials.

OBJECTIVES: The objective of the study was to evaluate the prevalence and proportions of antibiotic-resistant species in periodontitis patients. METHODS: A systematic scoping review of randomized clinical trials (RCTs) was conducted using the PRISMA extension for scoping reviews involving different databases. MeSH terms and keywords were provided to examine only RCTs with antibiotic-resistant results that included at least 3 months of follow-up of systematically healthy patients diagnosed with periodontitis and treated with systemic or local antibiotics adjunctive to subgingival debridement. RCTs that managed participants surgically, duplicate publications, and investigations implemented on animals were discarded. RESULTS: Six RCTs were chosen. These studies included 465 patients. Most investigations observed that while Aggregatibacter actinomycetemcomitans, Tannerella forsythia, and Porphyromonas gingivalis had low resistance to amoxicillin, microorganisms in many sites showed resistance to tetracycline, metronidazole, and azithromycin pretreatment. A. actinomycetemcomitans showed high resistance to tetracycline pre- and post-therapy. The proportion of antibiotic-resistant samples augmented rapidly after the prescription of antibiotics in all test groups. The percentage of antibiotic-resistant microorganisms decreased over time; at the end of the follow-up period, resistance levels were close to baseline levels. CONCLUSIONS: Adjunctive local and systemic antibiotic treatment temporarily increased the antibiotic resistance of subgingival microorganisms; nonetheless, many bacteria remained susceptible to antibiotics during their administration.

Oral lesions in patients with human monkeypox: A systematic scoping review.

OBJECTIVES: To describe the clinical features and location of oral lesions in patients with human monkeypox. METHODS: A systematic scoping review was accomplished by implementing the Preferred Reporting Items for Systematic Reviews and Meta-analyses extension for scoping reviews. The analysis incorporated varied databases and the gray literature. Keywords were implemented to search publications in all languages until July 2022. RESULTS: The initial electronic exploration included 889 reports, of which 843 studies were eliminated. Reading the full text occasioned the omission of 27 additional investigations. Finally, 19 publications were included. These reports analyzed 1256 patients with monkeypox, mostly described in Europe. Most of them were men who have sex with men. The study population consisted mainly of adults but children were also infected. The oral lesions of monkeypox patients were observed in different parts of the oral mucosa, including lips and tongue, but mainly in the tonsils (15 cases). The oral lesions manifested as papules, vesicles, pustules, and ulcers. Erythema, edema, enanthema, and severe pain were also observed, accompanied by tonsillar enlargement. Sore throat was also reported. Monkeypox is accompanied by a significant number of systemic manifestations, mainly including multiple skin lesions throughout the body, as well as lymphadenopathy, fever, headache, myalgia, and fatigue, among others. The symptoms associated with monkeypox were managed with different antiretroviral and antimicrobial therapies and medications to control pain and fever principally. Seventeen deaths were informed. CONCLUSION: Most monkeypox-associated oral lesions are seen in different parts of the oral mucosa, mainly in the tonsils manifested as papules, vesicles, pustules, and ulcers.

Efficacy of CAD/CAM Technology in Interventions Implemented in Orthodontics: A Scoping Review of Clinical Trials.

Objectives: To evaluate the efficacy of computer-aided design/computer-aided manufacturing (CAD/CAM) technology in interventions implemented in orthodontics. Methods: A scoping review of scientific evidence was accomplished, involving different databases. MesH terms and keywords were provided to examine clinical trials (CTs) in all languages. Exclusively CTs that fulfilled the eligibility criteria were admitted. Results: Eight CTs were chosen. These experiments evaluated 542 patients. Four CTs compared the computer-aided indirect bonding method versus the traditional direct bonding of orthodontic brackets. Three CTs compared CAD/CAM retainers with other types of retainers, and one CT compared the CAD/CAM group with multistranded stainless steel wires versus stainless steel wires. Regarding the efficacy of the interventions with CAD/CAM technology used in orthodontics, variable results were found. The indirect bonded customized CAD/CAM brackets presented just a slight effect on the treatment efficacy and therapy results. Two CTs showed that an indirect bonding self-ligating standard system had a similar quality of therapy in comparison with the CAD/CAM customized bracket system. Concerning the clinical failure rate, no differences were presented between the CAD/CAM retainer and other retainers. A CAD/CAM system had more loose brackets than a noncustomized system and was observed also a greater amount of immediate debonding with CAD/CAM indirect bonding than with direct bonding. CAD/CAM fixed retainers revealed inferior relapse and fewer failures than lab-based and conventional chairside retainers. No changes between treatment groups were observed regarding the total therapy time, amount of appointments, and quantity of archwire bends. Conclusions: In general terms, no greater efficacy of CAD/CAM technology was observed over traditional therapies used in orthodontics. However, it was found that gingival inflammation and the accumulation of bacterial plaque and dental calculus were lower when CAD/CAM retainers were used. When comparing interventions that include CAD/CAM systems with conventional therapies, no significant reduction in care times was found.