Reassembly of the vesicular structure of niosomes after their destruction in a mechanical field.

This paper presents, for the first time, evidence for vesicle destruction and payload loss at the stage of purification of niosome dispersions by centrifugation, an important operation in the assembly of vesicular materials. The ability of niosomes of different compositions to reassemble, i.e., to restore the vesicular structure after destruction in the field of centrifugal forces, was demonstrated by dynamic light scattering and fluorescence spectroscopy. The kinetics of reassembly of vesicular structures is determined by the strength of the centrifugal field and the composition of niosomes. In contrast to ternary compositions, where particle size and modality are essentially unchanged after redispersion of the precipitate resulting from centrifugation, niosome dispersions containing anionic dicetyl phosphate includes micron-sized particles after redispersion, which vary in size over a wide range throughout the observation period. The reassembly process is complicated by the presence of charge on the surface of the niosomes. Elastic niosomes - ethosomes have been synthesised which, due to the high deformability of the shells, are less susceptible to destruction in the centrifugal field and retain the contents of the aqueous core. Using the "energy landscape" approximation, it is shown that vesicular structures assembled during hydration and reassembled after their centrifugation occupy different positions in the energetic pathway of their preparation. The results obtained should also be taken into account when determining the entrapment efficiency, since this procedure uses centrifugation to separate the load. It is important to note that the physical stability of niosomes, which is usually considered in terms of the functional activity of particles, is manifest and should be considered at the material preparation stage.

On the relationship between the properties of planar structures of non-ionic surfactants and their vesicular analogues - Niosomes.

In recent years, the study of niosomes as nanocarriers alternative to liposomes has received increasing attention. In contrast to well-studied liposome membranes, many aspects of the behavior of analogous niosome bilayers have not been studied. This paper considers one of these aspects related to the communication between the physicochemical properties of planar and vesicular objects. We present the first results of comparative studies of Langmuir monolayers of binary and ternary (with cholesterol) mixtures of non-ionic surfactants based on sorbitan esters and niosomal structures assembled from the same materials. The Thin-Film Hydration (TFH) method in the gentle shaking version was used to produce the particles of large sizes, while small unilamellar high quality vesicles with a unimodal distribution of particles were prepared by TFH using ultrasonic treatment and extrusion. An analysis of the structural organization and phase state of monolayers based on compression isotherms and supplemented by thermodynamic calculations, as well as the results of determining the particle morphology, polarity and microviscosity of niosome shells, made it possible to obtain fundamental data on the intermolecular interactions of the components and their packing in shells and to relate these data to the properties of niosomes. This relationship can be used to optimize the composition of niosome membranes and predict the behavior of these vesicular systems. It was shown that cholesterol excess creates regions of bilayers with increased rigidity (like "lipid rafts"), which hinders the process of folding film fragments into small niosomes.

Supramolecular control of the structure and receptor properties of an amphiphilic hemicyanine chromoionophore monolayer at the air/water interface.

Designing sensors for toxic compounds such as mercury salts in aqueous solutions still remains one of the most pressing tasks of modern chemical research, since many existing systems do not show enough sensitivity and/or response. In this regard, the opportunities offered by supramolecular approaches can be used to improve both these characteristics by creating a new self-organized smart system. Herein, we show that barium cations, that according to the data of X-ray standing waves do not bind directly to the ionophore molecules in the monolayers at the air/water interface, could be used to efficiently preorganize such molecules to achieve supramolecular architecture. We demonstrate that such preorganization ensures both low analyte detection threshold and high fluorescent response. We reveal the interrelation of the monolayer structure and receptor characteristics of a sensory system and show that such cation-induced preorganization in Langmuir monolayers of a hemicyanine dithia-aza-crown-substituted chromoionophore inhibits the formation of non-fluorescent aggregates with low receptor function, and allows the quantitative detection of mercury cations using a ratiometric fluorometric approach.

Long-Sought Redox Isomerization of the Europium(III/II) Complex Achieved by Molecular Reorientation at the Interface.

Redox isomerism, that is, the change of a metal cation valence state in organic complexes, can find promising applications in multistable molecular switches for various molecular electronic devices. However, despite a large number of studies devoted to such processes in organic complexes of multivalent lanthanides, redox-isomeric transformations were never observed for europium. In the present work, we demonstrate the unique case of redox isomerization of Eu(III)/Eu(II) complexes on the example of Eu double-decker octa-n-butoxyphthalocyaninate (Eu[(BuO)8Pc]2) under ambient conditions (air and room temperature). It is shown that assumption of the face-on orientation on the aqueous subphase surface, in which two of each phthalocyanine decks in Eu[(BuO)8Pc]2 are located in different media (air and water), leads to the intramolecular electron transfer that results in the formation of a divalent Eu(II) cation in the complex. Lateral compression of the thus-formed monolayer results in the reorientation of bisphthalocyaninate to the edge-on state, in which the ligands can be considered identical, and occurrence of the reverse redox-isomeric transformation into the complex with a trivalent Eu cation. Both redox-isomeric states were directly observed by X-ray absorption near-edge structure spectroscopy in ultrathin films formed under different conditions.

Interfacial self-assembly of functional bilayer templates comprising porphyrin arrays and graphene oxide.

Fabricating of solid-supported hybrid nanostructures remains a challenging problem because it is difficult to control all interfacial interactions influencing the structure and stability of these systems. The most widely used approach to solving this problem is a bottom-up assembly on the surface templates such as self-assembled monolayers (SAMs). Herein we suggest an alternative approach to tailoring solid surfaces by a formation of an interlayer anchoring the nanostructured film to the solid substrate. We formed a multifunctional bilayer template (MBT), comprising an adhesive monolayer of graphene oxide and a functional ordered monolayer of metal organic compound (Zinc-tetra(4-pyridyl)porphyrin) directing further bottom-up growth of the nanostructures. The one-step assembly of MBT proceeded spontaneously at the air/water interface and was monitored by an in-situ fiber optic absorption and fluorescence spectroscopy in a Langmuir trough. Dilatation surface rheology was applied to study the evolution of molecular organization of the monolayers upon adding the zinc ions, GO and their mixture into the subphase. The MBT templates were used for the assembly of porphyrin-based SURMOFs with two different structures. Our strategy makes it possible to assemble surface-anchored nanostructures avoiding the use of SAMs and it can be extended to other types of ultrathin hybrid systems.

Understanding Self-Assembly of Porphyrin-Based SURMOFs: How Layered Minerals Can Be Useful.

Porphyrin-based metal-organic frameworks on surfaces are a new class of planar materials with promising features for applications in chemical sensing, catalysis, and organic optoelectronics at nanoscale. Herein, we studied systematically a series of the SURMOFs assembled from variously meso-carboxyphenyl/pyridyl-substituted porphyrins and zinc acetate on template monolayers of graphene oxide via layer-by-layer deposition. This microscopically flat template can initiate the growth of macroscopically uniform SURMOF films exhibiting well-resolved X-ray diffraction. By applying the D'yakonov method, which has been previously used for the extraction of self-convolution of electron density in clay minerals, to the analysis of the experimental diffraction patterns of the SURMOFs, we determined the relation between the structure of porphyrin linkers and the geometry of packing motives in the films. We showed that the packing of the SURMOFs differs significantly from that of bulk powders of similar composition because of steric limitations imposed on the assembly in 2D space. The results of microscopic examination of the SURMOFs suggest that the type of metal-to-linker chemical bonding dictates the morphology of the films. Our method provides an enlightening picture of the interplay between supramolecular ordering and surface-directed assembly in porphyrin-based SURMOFs and is useful for rationalizing the fabrication of various classes of layered metal-organic frameworks on solids.

Ultrathin Polydiacetylene-Based Synergetic Composites with Plasmon-Enhanced Photoelectric Properties.

Fabricating plasmon-enhanced organic nanomaterials with technologically relevant supporting architectures on planar solids remains a challenging task in the chemistry of thin films and interfaces. In this work, we report a bottom-up assembly of ultrathin layered composites of conductive polymers with photophysical properties enhanced by gold nanoparticles. The polydiacetylene component was formed by photopolymerization of a catanionic mixture of pentacosadiynoic surfactants on a surface of citrate-stabilized gold hydrosol monitored by a fiber optic spectrometer. Microscopic examination of the 3 nm thick solid-immobilized film showed that gold nanoparticles (AuNPs) do not aggregate within the monolayer upon polymerization. This polydiacetylene/AuNPs monolayer was coupled with 60 nm thick polyaniline-based layer deposited atop. The resulting polymer composite with an integrated 4-stripe electric cell showed nonadditive electric behavior due to the formation of electron-hole pairs with increased charge carrier mobility at the interface between the polymer layers. Under visible light irradiation of the composite film, a plasmonic effect of the gold nanoparticles was observed at the onset of photoconductivity, although neither polydiacetylene nor the polyaniline component alone are photoconductive polymers. The results indicate that our bottom-up strategy can be expanded to design other plasmon-enhanced ultrathin polymer composites with potential applications in optoelectronics and photovoltaics.

A metal-responsive interdigitated bilayer for selective quantification of mercury(ii) traces by surface plasmon resonance.

Reusable surface plasmon resonance chips allowing the quantitative and selective detection of mercury(ii) ions in water at the 0.01 nM level are reported. The surface-modified gold sensor consists of a rarefied self-assembled monolayer of octanethiol topped with a Langmuir-Blodgett monolayer of an amphiphilic and highly-specific chelator. The interdigitated architecture confers to the bilayer a high packing density, surface coverage, and binding-group accessibility.

Artificial iono- and photosensitive membranes based on an amphiphilic aza-crown-substituted hemicyanine.

Artificial iono- and photosensitive membranes based on an amphiphilic aza-crown-substituted hemicyanine are assembled on liquid and solid supports and their aggregation behaviour, which is influenced by the binding of metal cations and surface density, is studied. The photoinduced charge-transfer properties of an analogous non-amphiphilic hemicyanine in solution are also demonstrated. An asymmetric sandwich dimer model is proposed and existence of such dimers in solution is evidenced by transient absorption and fluorescence anisotropy experiments. Changes in absorption and emission spectra, as well as compression isotherms of the amphiphile observed in the presence of cations, are discussed in terms of 2D molecular reorganisation. Surface-pressure-controlled reversible excimer formation at the air-water interphase and excimer-type emission of Langmuir-Blodgett films in the presence of cations are demonstrated and are discussed on the basis of fibre-optic fluorimetry and fluorescence microscopy results.

Colorimetric Hg2+ sensing in water: from molecules toward low-cost solid devices.

A new colorimetric molecular sensor allowing for cheap, fast, sensitive, and highly selective naked-eye detection of Hg(2+) in water is described. This molecule combines a 1,8-diaminoanthraquinone signaling subunit and phosphonic acid esters that confer the water solubility to the dye (R = H). A ready-to-use colorimetric solid sensor was obtained by incorporating an amphiphilic analog (R = OC(12)H(25)) exhibiting similar binding properties and optical responses in an agarose film.

Supramolecular control of photochemical and electrochemical properties of two oligothiophene derivatives at the air/water interface.

Two geometric isomers of oligothiophene derivatives containing two crowned styryl fragments in 2- or 3-positions of thiophene rings are able to form stable monolayers on the water subphase. The organizing of crown-containing oligothiophenes in monolayers is guided by the π-stacking interaction of hydrophobic styrylthiophene fragments and interaction of hydrophilic macrocycles with the water subphase. The difference in structure of oligothiophene molecules leads to the formation of distinct monolayer architectures with various electrochemical and optical characteristics.

2D "soap"-assembly of nanoparticles via colloid-induced condensation of mixed Langmuir monolayers of fatty surfactants.

We describe a new type of colloidal 2D gels formed in mixed Langmuir monolayers of stearic acid and octadecylamine on a surface of gold hydrosol. The adsorption of gold nanoparticles on the mixed monolayer led to an increase of interactions between oppositely charged surfactants giving a "soap" of mixed fatty salt. The observed effect is equivalent to a virtual "cooling" of floating monolayer, which undergoes rapid condensation on a surface of aqueous colloid. The consequent shrinking and rearrangement of the monolayer resulted in aggregation of nanoparticles into colloidal 2D "soap"-gels, which represented arrested colloidal phases within nonadsorbing organic medium. When sequentially deposited onto solids by Langmuir-Blodgett technique, the 2D "soap"-gels separated into organic and colloidal phases and gave dendrite-like bilateral organic crystallites coated with gold nanoparticles. The reported colloidal "soap"-assembly can offer a new opportunity to design 2D colloidal systems of widely variable chemistry and structures.

Hydrogen-bond-guided self-assembly of nucleotides on a receptor-array surface.

The hydrogen-bond-guided self-assembly of 5'-ribonucleotides bearing adenine(A), cytosine (C), uracil (U), or guanine (G) bases from aqueous solution on a lipid-like surface decorated with synthetic bis(Zn(II)-cyclen) (cyclen=1,4,7,10-tetraazacyclodododecane) metal-complex receptor sites is described. The process was studied by using surface plasmon resonance spectroscopy. The data show that the mechanism of nucleotide binding to the 2D template is influenced by the chemistry of the bases and the pH value of the solution. In a neutral solution of pH 7.5, the process is cooperative and selective with respect to Watson-Crick pairs (A-U and C-G), which form stable double planes in accordance with the Chargaff rule. In a more acidic solution at pH 6.0, the interactions between complementary partners become non-cooperative and the surface also stabilizes mismatched and wobble pairs due to the pH-induced changes in the receptor coordination state. The results suggest that hydrogen bonding plays a key role in the self-assembly of complementary nucleotides at the lipid-like interface, and the cooperative character of the process stems from the ideal matching of the orientation and chemistry of all the interacting components with respect to each other in neutral solution.

Lateral 2D-3D phase segregation in fatty acid/fatty amine monolayers induced by langmuir-blodgett deposition.

We describe the formation of lateral 2D-3D patterns in mixed multilayer LB films of stearic acid (SA) and octadecylamine (ODA) deposited from aqueous subphases at a basic pH. The 3D particles of SA constituting the micrometer-scale linear assemblies in the LB film are assumed to segregate at the three-phase contact line in the course of film deposition. This 2D-3D phase separation of the two-component system presumably originates from the substrate-induced lowering of the collapse point of SA that leads to spontaneous 3D condensation of an acid on a solid support. The morphology of SA/ODA LB patterns is sensitively influenced by the deposition speed and surface pressure, while the chemistry of the solid support does not affect the resulting structures. The possible mechanism that controls the specific orthogonal arrangement of the 3D phase of SA in the LB film through wettability oscillations is suggested.

Two-dimensional arrays of amphiphilic Zn2+-cyclens for guided molecular recognition at interfaces.

The sterically guided molecular recognition of nucleobases, phosphates, adenosine, and uridine nucleotides on Langmuir monolayers and Langmuir-Blodgett monolayers of amphiphilic mono- or bis(Zn2+-cyclen)s assembled on thiolated surfaces was investigated. The stepwise selective binding of metal ions, uracil, or phosphate by dicetyl cyclen monolayers with variously tuned structures at the air/water interface was corroborated by the measurements of the corresponding LB films deposited onto quartz crystals. Two types of recognition surfaces were fabricated from Zn2+-dicetyl cyclen. The surface covered with a complex preformed in the Langmuir monolayer was capable both of imide and of phosphate binding. The similar complex formed directly in an LB film on thiolated gold was inactive with respect to imide. The surface plasmon resonance measurements evidenced the stepwise assembly of complementary nucleotides on SAM/LB templates through consecutive phosphate-Zn2+-cyclen coordination. Base pairing between nucleotides resulted in a formation of A-U bilayers comprising two complementary monolayers. Finally, we report on SAM/LB patterns designed for divalent molecular recognition of uridine phosphate by amphiphilic bis(Zn2+-cyclen).