Fillers and methods to improve the effective (out-plane) thermal conductivity of polymeric thermal interface materials - A review.

The internet of things and growing demand for smaller and more advanced devices has created the problem of high heat production in electronic equipment, which greatly reduces the work performance and life of the electronic instruments. Thermal interface material (TIM) is placed in between heat generating micro-chip and the heat dissipater to conduct all the produced heat to the heat sink. The development of suitable TIM with excellent thermal conductivity (TC) in both in-plane and through-plane directions is a very important need at present. For efficient thermal management, polymer composites are potential candidates. But in general, their thermal conductivity is low compared to that of metals. The filler integration into the polymer matrix is one of the two approaches used to increase the thermal conductivity of polymer composites and is also easy to scale up for industrial production. Another way to achieve this is to change the structure of polymer chains, which fall out of the scope of this work. In this review, considering the first approach, the authors have summarized recent developments in many types of fillers with different scenarios by providing multiple cases with successful strategies to improve through-plane thermal conductivity (TPTC) (k⊥). For a better understanding of TC, a comprehensive background is presented. Several methods to improve the effective (out-plane) thermal conductivity of polymer composites and different theoretical models for the calculation of TC are also discussed. In the end, it is given a detailed conclusion that provides drawbacks of some fillers, multiple significant routes recommended by other researchers to build thermally conductive polymer composites, future aspects along with direction so that the researchers can get a guideline to design an effective polymer-based thermal interface material.

Empowering CO2 Eco-Refrigeration With Colossal Breathing-Caloric-Like Effects in MOF-508b.

Today, ≈20% of the electric consumption is devoted to refrigeration; while, ≈50% of the final energy is dedicated to heating applications. In this scenario, many cooling devices and heat-pumps are transitioning toward the use of CO2 as an eco-friendly refrigerant, favoring carbon circular economy. Nevertheless, CO2 still has some limitations, such as large operating pressures (70-150 bar) and a critical point at 31 °C, which compromises efficiency and increases technological complexity. Very recently, an innovative breathing-caloric mechanism in the MIL-53(Al) compound is reported, which implies gas adsorption under CO2 pressurization boosted by structural transitions and which overcomes the limitations of stand-alone CO2. Here, the breathing-caloric-like effects of MOF-508b are reported, surpassing by 40% those of MIL-53(Al). Moreover, the first thermometry device operating at room temperature and under the application of only 26 bar of CO2 is presented. Under those conditions, this material presents values of ΔT ≈ 30 K, reaching heating temperatures of 56 °C and cooling temperatures of -10 °C, which are already useful for space heating, air-conditioning, food refrigeration, and freezing applications.

A Relatively Simple Look at the Rather Complex Crystallization Kinetics of PLLA.

This work demonstrates that, despite the existence of a significant number of works on PLA crystallization, there is still a relatively simple way, different from those already described, in which its complex kinetics can be observed. The X-ray diffraction (XRD) results presented here confirm that the PLLA under study crystallizes mostly in the α and α' forms. An interesting observation is that at any temperature in the studied range of the patterns, the X-ray reflections stabilize with a given shape and at a given angle, different for each temperature. That means that both α and α' forms coexist and are stable at the same temperatures so that the shape of each pattern results from both structures. However, the patterns obtained at each temperature are different because the predominance of one crystal form over the other depends on temperature. Thus, a two-component kinetic model is proposed to account for both crystal forms. The method involves the deconvolution of the exothermic DSC peaks using two logistic derivative functions. The existence of the rigid amorphous fraction (RAF) in addition to the two crystal forms increases the complexity of the whole crystallization process. However, the results presented here show that a two-component kinetic model can reproduce the overall crystallization process fairly well over a broad range of temperatures. The method used here for PLLA may be useful for describing the isothermal crystallization processes of other polymers.

Discovery of Colossal Breathing-Caloric Effect under Low Applied Pressure in the Hybrid Organic-Inorganic MIL-53(Al) Material.

In this work, "breathing-caloric" effect is introduced as a new term to define very large thermal changes that arise from the combination of structural changes and gas adsorption processes occurring during breathing transitions. In regard to cooling and heating applications, this innovative caloric effect appears under very low working pressures and in a wide operating temperature range. This phenomenon, whose origin is analyzed in depth, is observed and reported here for the first time in the porous hybrid organic-inorganic MIL-53(Al) material. This MOF compound exhibits colossal thermal changes of ΔS ∼ 311 J K-1 kg-1 and ΔH ∼ 93 kJ kg-1 at room temperature (298 K) and under only 16 bar, pressure which is similar to that of common gas refrigerants at the same operating temperature (for instance, p(CO2) ∼ 64 bar and p(R134a) ∼ 6 bar) and noticeably lower than p > 1000 bar of most solid barocaloric materials. Furthermore, MIL-53(Al) can operate in a very wide temperature range from 333 K down to 254 K, matching the operating requirements of most HVAC systems. Therefore, these findings offer new eco-friendly alternatives to the current refrigeration systems that can be easily adapted to existing technologies and open the door to the innovation of future cooling systems yet to be developed.

Properties of Mosquito Repellent-Plasticized Poly(lactic acid) Strands.

Poly(lactic acid) (PLA) is an attractive candidate for replacing petrochemical polymers because it is fully biodegradable. This study investigated the potential of PLA as a sustainable and environmentally friendly alternative material that can be developed into commercially viable wearable mosquito repellent devices with desirable characteristics. PLA strands containing DEET and IR3535 were prepared by twin screw extrusion compounding and simultaneously functioned as plasticizers for the polymer. The plasticizing effect was investigated by thermal and rheological studies. DSC studies showed that the addition of DEET and IR3535 into PLA strands reduced the glass transition temperature consistent with predictions of the Fox equation, thus proving their efficiency as plasticizers. The rheology of molten samples of neat PLA and PLA/repellents blends, evaluated at 200 °C, was consistent with shear-thinning pseudoplastic behaviour. Raman studies revealed a nonlinear concentration gradient for DEET in the PLA strand, indicating non-Fickian Type II transport controlling the desorption process. Release data obtained at 50 °C showed initial rapid release followed by a slower, near constant rate at longer times. The release rate data were fitted to a novel modification of the Peppas-Sahlin desorption model.

Evaluation of the Curing of Adhesive Systems by Rheological and Thermal Testing.

The analysis of thermal processes associated to the curing of adhesives and the study of mechanical behavior once cured, provide key information to choose the best option for any specific application. The proposed methodology for the curing characterization, based on thermal analysis and rheology, is described through the comparison of three commercial adhesives. The experimental techniques used here are Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC) and Rheology. TGA provides information about the thermal stability and filler content, DSC allows the evaluation of some thermal events associated to the cure reaction and to thermal changes of the cured material when subjected to temperature changes. Rheology complements the information of the thermal transformations from a mechanical point of view. Thus, the curing reaction can be tracked through the elastic modulus (mainly the storage modulus), the phase angle and the gap. In addition, it is also shown that although DSC is of no use to study the curing of moisture curable adhesives, it is a very convenient method to evaluate the low temperature glass transition of amorphous systems.

Dynamic rheological comparison of silicones for podiatry applications.

PURPOSE: This work shows an effective methodology to evaluate the dynamic viscoelastic behavior of silicones for application in podiatry. The aim is to characterize, compare their viscoelastic properties according to the dynamic stresses they can be presumably subjected when used in podiatry orthotic applications. These results provide a deeper insight which extends the previous creep-recovery results to the world of dynamic stresses developed in physical activity. In this context, it shoulod be taken into account that an orthoses can subjected to a set of static and dynamic shear and compressive forces. METHODS: Two different podiatric silicones, Blanda-blanda and Master, from Herbitas, are characterized by dynamic rheological methods. Three kinds of rheological tests are considered: shear stress sweep, compression frequency sweep and shear frequency sweep, all the three with simultaneous control of the static force at three different levels. The static force represents a static load like that produced by the weight of a human body on a shoe insole. In a practical sense, dynamic stresses are related to physical activity and are needed to evaluate the frequency effect on the viscoelastic behavior of the material. It is considered that the dynamic stresses can be applied in compression and shear since, in practice, the way the stresses are applied in real life depends on the orthoses geometry and its exact location with respect to the foot and shoe. The effects of static and dynamic loads are individualized and compared to each other through the relations between the elastic constants for isotropic materials. CONCLUSIONS: The overall proposed experimental methodology can provide very insightful information for better selection of materials in podiatry applications. This study focuses on the rheological characterization to choose the right silicone for each podiatric application, taking into account the dynamic viscoelastic requirements associated to the physical activity of user. Accordingly, one soft and one hard silicones of common use in podiatry were tested. Each of the two silicones exhibit not only different moduli values, but also, a different kind of dependence of the dynamic moduli with respect to the static load. In the case of the soft sample a linear trend is observed but in the case of of the hard one the dependence is of the power law type. Moreover, these samples exhibit very different Poisson's coefficient values for compression stresses lower than 20 kPa, and almost the same values for stresses above 40 kPa. That different dependence of the Poisson's ratio on the static load should also be taken into account for material selection in customized podiatry applications, where static and dynamic loads are strongly dependent on the individual weight and activity.

[(CH3)2NH2]7Pb4X15 (X = Cl- and Br-), 2D-Perovskite Related Hybrids with Dielectric Transitions and Broadband Photoluminiscent Emission.

We have prepared two new lead halides with the novel general formula of DMA7Pb4X15 (DMA = [(CH3)2NH2]+ and X = Cl- or Br-) by using an easy route under mild conditions at room temperature. These compounds exhibit an unprecedented crystal structure, are formed by layers of distorted [PbX6] octahedra, which share corners and faces, and contain intercalated DMA cations. Very interestingly, they display dielectric transitions, which are related to a partial order-disorder process of the DMA cations between 160 and 260 K. Additionally, these new layered hybrids exhibit a broadband photoluminiscent emission, which is related to the structural distortions of the [PbX6] octahedra. These findings not only open up large possibilities for future optoelectronic applications of these materials, but they also offer a novel playground for an easy modulation of electrical and optical properties of hybrid organic-inorganic materials. We anticipate that this novel A7Pb4X15 formula can be adequate to tune the family of the hybrid lead halides using other alkylammonium cations, such as methylammonium, formamidinium, or ethylammonium, to improve their photoelectronic properties.

Giant barocaloric effect in the ferroic organic-inorganic hybrid [TPrA][Mn(dca)3] perovskite under easily accessible pressures.

The fast growing family of organic-inorganic hybrid compounds has recently been attracting increased attention owing to the remarkable functional properties (magnetic, multiferroic, optoelectronic, photovoltaic) displayed by some of its members. Here we show that these compounds can also have great potential in the until now unexplored field of solid-state cooling by presenting giant barocaloric effects near room temperature already under easily accessible pressures in the hybrid perovskite [TPrA][Mn(dca)3] (TPrA: tetrapropylammonium, dca: dicyanamide). Moreover, we propose that this will not be an isolated example for such an extraordinary behaviour as many other organic-inorganic hybrids (metal-organic frameworks and coordination polymers) exhibit the basic ingredients to display large caloric effects which can be very sensitive to pressure and other external stimuli. These findings open up new horizons and great opportunities for both organic-inorganic hybrids and for solid-state cooling technologies.

Creep analysis of silicone for podiatry applications.

PURPOSE: This work shows an effective methodology to characterize the creep-recovery behavior of silicones before their application in podiatry. The aim is to characterize, model and compare the creep-recovery properties of different types of silicone used in podiatry orthotics. METHODS: Creep-recovery phenomena of silicones used in podiatry orthotics is characterized by dynamic mechanical analysis (DMA). Silicones provided by Herbitas are compared by observing their viscoelastic properties by Functional Data Analysis (FDA) and nonlinear regression. The relationship between strain and time is modeled by fixed and mixed effects nonlinear regression to compare easily and intuitively podiatry silicones. RESULTS: Functional ANOVA and Kohlrausch-Willians-Watts (KWW) model with fixed and mixed effects allows us to compare different silicones observing the values of fitting parameters and their physical meaning. The differences between silicones are related to the variations of breadth of creep-recovery time distribution and instantaneous deformation-permanent strain. Nevertheless, the mean creep-relaxation time is the same for all the studied silicones. Silicones used in palliative orthoses have higher instantaneous deformation-permanent strain and narrower creep-recovery distribution. CONCLUSIONS: The proposed methodology based on DMA, FDA and nonlinear regression is an useful tool to characterize and choose the proper silicone for each podiatry application according to their viscoelastic properties.

Coexistence of Three Ferroic Orders in the Multiferroic Compound [(CH3 )4 N][Mn(N3 )3 ] with Perovskite-Like Structure.

The perovskite azido compound [(CH3 )4 N][Mn(N3 )3 ], which undergoes a first-order phase change at Tt =310 K with an associated magnetic bistability, was revisited in the search for additional ferroic orders. The driving force for such structural transition is multifold and involves a peculiar cooperative rotation of the [MnN6 ] octahedral as well as order/disorder and off-center shifts of the [(CH3 )4 N](+) cations and bridging azide ligands, which also bend and change their coordination mode. According to DFT calculations the latter two give rise to the appearance of electric dipoles in the low-temperature (LT) polymorph, the polarization of which nevertheless cancels out due to their antiparallel alignment in the crystal. The conversion of this antiferroelectric phase to the paraelectric phase could be responsible for the experimental dielectric anomaly detected at 310 K. Additionally, the structural change involves a ferroelastic phase transition, whereby the LT polymorph exhibits an unusual and anisotropic thermal behavior. Hence, [(CH3 )4 N][Mn(N3 )3 ] is a singular material in which three ferroic orders coexist even above room temperature.

Role of Temperature and Pressure on the Multisensitive Multiferroic Dicyanamide Framework [TPrA][Mn(dca)3] with Perovskite-like Structure.

A multistimuli response to temperature and pressure is found in the hybrid inorganic-organic perovskite-like [TPrA][Mn(dca)3] compound, which is related to a first-order structural phase transition near room temperature, Tt ≈ 330 K. This phase transition involves a transformation from room temperature polymorph I, with the noncentrosymmetric space group P4̅21c, to the high temperature polymorph II, with the centrosymmetric space group I4/mcm, and it implies ionic displacements, order-disorder phenomena, and a large and anisotropic thermal expansion (specially along the c-axis). As a consequence, [TPrA][Mn(dca)3] exhibits a dielectric anomaly, associated with the change from a cooperative to a noncooperative electric behavior (antiferroelectric (AFE)-paraelectric (PE) transition). The former implies an AFE distribution of electric dipoles in polymorph I, related to the described off-shift of the apolar TPrA cations and the order-disorder of the polar dca ligands mechanisms, that are different from those reported, up to now, for others perovskite-type hybrid compounds. Such cooperative electric order, below Tt ≈ 330 K, coexisting with long-range antiferromagnetic ordering below T = 2.1 K render the [TPrA][Mn(dca)3] a new type-I multiferroic material. In addition, the obtained experimental results reveal that this compound is also a multistimuli-responsive material, with a very large sensitivity toward temperature and applied external pressure, δTt/δP ≈ 24 K kbar(-1), even for small values of pressure (P < 2 kbar). Therefore, this material opens up a potential interest for future technological applications, such as temperature/pressure sensing.

Synthesis and characterization of a new aluminium-based compound.

A new aluminium polynuclear crystalline species, Al(13)(OH)(30)(H(2)O)(15)Cl(9) has been synthesized and characterized. It is a particular case of the Al(13)(OH)(30-y)(H(2)O)(18-x)Cl(9) x zH(2)O family. It has been obtained from aluminium waste cans treated with HCl solution in strong acid media, followed by an ageing period. The crystalline structure of the complex was determined by XRD spectroscopy. Twelve reflections were found and indexed with the DICVOL04 software. Morphologically, a flattened preferred orientation was observed by SEM and FESEM. The chemical structure was studied by several absorption spectroscopy techniques: FTIR, ATR-FTIR and Raman dispersion spectroscopy. The coordination of the aluminium nuclei was determined by Al-MAS-NMR. Only octahedral sites were observed. Thermal characterization of the compound was performed by evolved gas analysis (EGA) coupled to simultaneous TGA-DSC.