Assessment of Black Carbon, optical properties and aerosol radiative forcing at Pranmati basin Himalayan critical zone observatory.

The study aimed to understand the optical properties of Black Carbon (BC) and radiative forcing over a data deficient Himalayan region focusing on critical zone observatory employing ground-based measurements by Aethalometer for BC and satellite retrieval techniques for optical properties during mid-May-June 2022 and January-May 2023. BC mass concentration ranged from 0.18 to 4.43 µgm-3, exhibit a mean of 1.47 ± 0.83 µgm-3 with higher summer concentration (1.51 ± 0.94 µgm-3) than winter (1.39 ± 0.61 µgm-3). The average Absorption Ångström Exponent observed to be significantly higher than unity (1.77 ± 0.31) over the studied high-altitude Himalayan region, suggesting the dominance of biomass-burning aerosol. Higher aethalometer derived compensation parameter (K) in winter suggesting locally originated BC while, lower K value in summer suggesting aged BC transported from Indo-Gangetic Plains. Optical properties calculated from "Optical Properties of Aerosol and Cloud" (OPAC) model are used in the "Santa Barbara DISORT Atmospheric Radiative Transfer" (SBDART) model to calculate the aerosol Direct Radiative Force (DRF). The entire studied period is characterized by the predominance of absorbing aerosols, particularly BC, increasing Aerosol Optical Depth, Asymmetric Parameters and decreasing Single Scattering Albedo, leading to a considerable increase in atmospheric radiative forcing (+0.9 Wm-2, top of atmosphere) and Heating Rate (0.36 KDay-1). The mean radiative forcing within atmosphere during summer was higher (+14.29 Wm-2) relative to the winter (+12.00 Wm-2), emphasizing the impact of absorbing aerosols on regional warming and potential glacier melting in the Himalayas at a faster rate. Urgent policy consideration for the reduction of absorbing aerosols is highlighted, recognizing the critical roles of Black Carbon in the changing behaviour of Critical Zone observatory. The study's data serve as a valuable resource to understanding and addressing uncertainties in climate models, aiding effective policy implementation for Black Carbon reduction.

Enhanced adsorption of Congo red dye onto polyethyleneimine-impregnated biochar derived from pine needles.

Biochar derived from waste pine needles was chemically modified using polyethyleneimine (PEI) to increase its adsorptive potential for withdrawal of anionic dye Congo red from aqueous solution. PEI impregnation on biochar was confirmed from scanning electron microscopy and energy-dispersive X-ray analysis, Fourier transform infrared spectroscopy, and X-ray diffraction analysis. The surface area of biochar decreased after PEI treatment, but the amine groups increased on biochar surface. PEI-treated biochar displayed considerable increase in adsorption at acidic conditions. Adsorption isotherm was best explained by Langmuir model (R2 > 99) and the adsorption kinetics agrees well with pseudo-second-order model. The maximum adsorption capacity of PEI-treated biochar was observed to be 294.11 mg g-1 and 30.76 mg g-1 for pristine biochar displaying a 9.5-fold increase. The positive value of standard enthalpy of adsorption (∆H° = 14.96 KJmole-1) indicated the endothermic nature of adsorption, and positive value of entropy (∆S° = 74.43 Jmole-1 K-1) revealed the affinity of biochar towards dye molecules. Negative value of Gibb's free energy ∆G° (- 7.2 KJmole-1) revealed that the process was spontaneous. Electrostatic interaction appeared to be the key mechanism governing the adsorption process. Thus, PEI-impregnated biochar represents novel low-cost sorbent that can effectively remove anionic dyes which are poorly removed by pristine biochar.

Bioremoval of toxic malachite green from water through simultaneous decolorization and degradation using laccase immobilized biochar.

In this study, decolorization and degradation of malachite green dye was studied using the laccase immobilized pine needle biochar. Successful immobilization of biochar was achieved by adsorption and confirmed through scanning electron microscopy and energy dispersive X-ray analysis (SEM-EDX), Fourier transform infrared spectroscopy (FTIR). High laccase binding of 64.4 U/g and high immobilization yield of 78.1% was achieved using 4U of enzyme at pH3 and temperature 30 °C. The immobilized laccase retained >50% relative activity in the pH range 2-7, >45% relative activity at 65 °C and >55% relative activity at 4 °C for 4 weeks. The re-usability of immobilized enzyme was checked with 2, 2'-azino-bis 3-ethylbenzothiazoline-6-sulphonic acid (ABTS) substrate and enzyme retained 53% of its activity after 6 cycles. Immobilized laccase was used for the degradation and decolorization of azo dye malachite green in aqueous solution. More than 85% removal of malachite green dye (50 mg/L) was observed within 5 h. FTIR and high performance liquid chromatography (HPLC) analysis clearly indicated the breakdown of dye and presence of metabolites (leuco malachite green, methanone, [4-(dimethyl amino)pheny]phenyl and 3-dimethyl-phenyl amine) in gas chromatography-mass spectrometry (GC-MS) analysis confirmed the dye degradation. Phytotoxicity analysis indicated that the enzymatic degradation resulted in lesser toxic metabolites than the original dye. Thus, laccase immobilized biochar can be used as an efficient biocatalytic agent to remove dye from water.

Liquid wastes as a renewable feedstock for yeast biodiesel production: Opportunities and challenges.

Microbial lipids (bacterial, yeast, or algal) production and its utilization as a feedstock for biodiesel production in a sustainable and economical way along with waste degradation is a promising technology. Oleaginous yeasts have demonstrated multiple advantages over algae and bacteria such as high lipid yields, lipid similarity to vegetable oil, and requirement of lesser area for cultivation. Oleaginous yeasts grown on lignocellulosic solid waste as renewable feedstocks have been widely reported and reviewed. Recently, industrial effluents and other liquid wastes have been evaluated as feedstocks for biodiesel production from oleaginous yeasts. The idea of the utilization of wastewater for the growth of oleaginous yeasts for simultaneous wastewater treatment and lipid production is gaining attention among researchers. However, the detailed knowledge on the economic aspects of different process involved during the conversion of oleaginous yeast into lipids hinders its large-scale application. Therefore, this review aims to provide an overview of yeast-derived biodiesel production by utilizing industrial effluents and other liquid wastes as feedstocks. Various technologies for biomass harvesting, lipid extraction and the economic aspects specifically focused on yeast biodiesel production were also analyzed and reported in this review. The utilization of liquid wastes and the incorporation of cost-efficient harvesting and lipid extraction strategy would facilitate large-scale commercialization of biodiesel production from oleaginous yeasts in near future.

Assessment of leaf morphological, physiological, chemical and stoichiometry functional traits for understanding the functioning of Himalayan temperate forest ecosystem.

Leaf functional traits support plant survival and growth in different stress and disturbed conditions and respond according to leaf habit. The present study examined 13 leaf traits (3 morphological, 3 chemical, 5 physiological, and 2 stoichiometry) of nine dominant forest tree species (3 coniferous, 3 deciduous broad-leaved, 3 evergreen broad-leafed) to understand the varied response of leaf habits. The hypothesis was to test if functional traits of the conifers, deciduous and evergreen differ significantly in the temperate forest and to determine the applicability of leaf economic theory i.e., conservative vs. acquisitive resource investment, in the temperate Himalayan region. The attributes of the functional traits i.e., leaf area (LA), specific leaf area (SLA), leaf dry matter content (LDMC), leaf water content (LWC), stomatal conductance (Gs), and transpiration (E) followed the order deciduous > evergreen > coniferous. Leaf carbon and leaf C/N ratio showed the opposite pattern, coniferous > evergreen > deciduous. Chlorophyll (Chl) and photosynthetic rate (A) were highest for evergreen species, followed by deciduous and coniferous species. Also, structural equation modelling determined that morphological factors were negatively related to physiological and positively with chemical factors. Nevertheless, physiological and chemical factors were positively related to each other. The physiological traits were mainly regulated by stomatal conductance (Gs) however the morphological traits were determined by LDMC. Stoichiometry traits, such as leaf C/N, were found to be positively related to leaf carbon, and leaf N/P was found to be positively related to leaf nitrogen. The result of the leaf functional traits relationship would lead to precise prediction for the functionality of the temperate forest ecosystem at the regional scale.

Update on prevalence and distribution pattern of tick-borne diseases among humans in India: a review.

In the present scenario, tick-borne diseases (TBDs) are well known for their negative impacts on humans as well as animal health in India. The reason lies in their increased incidences due to global warming, environmental and ecological changes, and availability of suitable habitats. On a global basis, they are now considered a serious threat to human as well as livestock health. The major tick-borne diseases in India include Kyasanur forest disease (KFD), Crimean-congo hemorrhagic fever (CCHF), Lyme disease (LD), Q fever (also known as coxiellosis), and Rickettsial infections. In recent years, other tick-borne diseases such as Babesiosis, Ganjam virus (GANV), and Bhanja virus (BHAV) infections have also been reported in India. The purpose of this paper is to review the history and the current state of knowledge of tick-borne diseases in the country. The conclusion of this review is extending the requirement of greater efforts in research and government management for the diagnosis and treatment and as well as prevention of these diseases so that tick-borne disease burden should be minimizing in India.

SARS-CoV-2 in wastewater: Challenges for developing countries.

The COVID-19 pandemic that has engulfed the world, has affected the human lives in several aspects. The detection of SARS-CoV-2 in faeces and urine of the infected person, even after viral clearance in the respiratory tract, and its presence in untreated wastewater raises the possibility of fecal-oral transmission in future. The situation is likely to be more aggravated in developing and least developed countries struggling with the problem of ineffective waste disposal system, open defecation, poor sanitation, and limited access to clean drinking water. In this review, the available data on wastewater treatment, sanitation status and healthcare infrastructure from middle- and low-income countries is collected and correlated with the risk associated with the fecal-oral transmission of SARS-CoV-2. The review also highlights the limitation of COVID-19 surveillance through sewage monitoring in these countries owing to the absence of proper sewerage system. An inclusive approach of awareness, prevention, and mitigation from global to the local levels is required to overcome this challenging situation in developing countries.