Recent advancements in polyurethane-based membranes for gas separation.

Gas separation membranes are critical in a variety of environmental research and industrial applications. These membranes are designed to selectively allow some gases to flow while blocking others, allowing for the separation and purification of gases for a variety of applications. Therefore, the demand for fast and energy-efficient gas separation techniques is of central interest for many chemical and energy production diligences due to the intensified levels of greenhouse and industrial gases. This encourages the researchers to innovate techniques for capturing and separating these gases, including membrane separation techniques. Polymeric membranes play a significant role in gas separations by capturing gases from the fuel combustion process, purifying chemical raw material used for plastic production, and isolating pure and noncombustible gases. Polyurethane-based membrane technology offers an excellent knack for gas separation applications and has also been considered more energy-efficient than conventional phase change separation methodologies. This review article reveals a thorough delineation of the current developments and efforts made for PU membranes. It further explains its uses for the separation of valuable gases such as carbon dioxide (CO2), hydrogen (H2), nitrogen (N2), methane (CH4), or a mixture of gases from a variety of gas spillages. Polyurethane (PU) is an excellent choice of material and a leading candidate for producing gas-separating membranes because of its outstanding chemical chemistry, good mechanical abilities, higher permeability, and variable microstructure. The presence of PU improves several characteristics of gas-separating membranes. Selectivity and separation efficiency of PU-centered membranes are enhanced through modifications such as blending with other polymers, use of nanoparticles (silica, metal oxides, alumina, zeolite), and interpenetrating polymer networks (IPNs) formation. This manuscript critically analyzes the various gas transport methods and selection criteria for the fabrication of PU membranes. It also covers the challenges facing the development of PU-membrane-based separation procedures.

Fabrication and characterization of novel, cost-effective graphitic carbon nitride/Fe coated textile nanocomposites for effective degradation of dyes and biohazards.

Textile-based photocatalysts are the new materials that can be utilized as an effective sustainable solution for biochemical hazards. Hence, we aimed to develop a sustainable, cost-effective, and facile approach for the fabrication of photocatalytic fabric using graphitic carbon nitride (g-C3N4) and ferric-based multifunctional nanocomposite. Bulk g-C3N4 was prepared from urea by heating it at 500 °C for 2 h. The structure of ball-milled g-C3N4 was engineered by doping with various amounts of iron (III) chloride hexahydrate solution (0.006 mol/L) and sintered at 90 °C for 24 h to prepare g-C3N4-nanosheets/α-Fe2O3 composites. These nanocomposites have potential avenues towards rational designing of g-C3N4 for improved photocatalytic, antibacterial, and antiviral behavior. The prepared nanocomposite was characterized for its surface morphology, chemical composition, crystal structure, catalytic, antibacterial, and antiviral behavior. The fabrication of ferric doped g-C3N4 nanocomposites was characterized by SEM, EDX, FTIR, and XRD analysis. The coated fabric nanocomposite was characterized for methylene blue dye degradation under visible light, antibacterial and antiviral behavior. The developed textile-based photocatalyst has been found with very good recyclability with photocatalytic degradation of dye up to 99.9 % when compared to conventional g-C3N4 powder-based photocatalyst.

Development of novel antiviral nanofinishes for bioactive textiles.

Virus-caused public health outbreaks represent a serious threat to humans all over the world. The rampant new 2019 coronavirus (SARS-CoV-2) has wreaked havoc on China and the rest of the world since December 2019. Now focus is on effective reduction of corona and other viral and bacterial infections in hospitals, public and private sectors, households, schools, etc. Metal and metal oxide nanoparticles, carbon nanotubes, heterostructures, patterned surfaces, and graphene-based materials have shown up to 99.9998% efficacy against bacteria, mold, and viruses. The stability, long shelf life, and robustness of inorganic nanoparticles make them desirable for antimicrobial nanofinishes. These inorganic antimicrobial agents are more stable than organic antibacterial compounds at high temperature and pressure. The high specific surface area-to-volume ratios and unique physicochemical characteristics of nanoparticles are largely responsible for their antibacterial actions. But their immobilization is a huge challenge. To address this issue, NPs were modified with (glycidoxypropyl) trimethoxysilane (GPTS) and applied on cotton fabric. The silane part of GPTS reacted with the NPs under acidic conditions while epoxy reacted with cotton under alkaline conditions. Treated cotton fabric showed good antiviral and antibacterial activity even after severe industrial washing.

Multifunctional Electrically Conductive Copper Electroplated Fabrics Sensitizes by In-Situ Deposition of Copper and Silver Nanoparticles.

In this study, we developed multifunctional and durable textile sensors. The fabrics were coated with metal in two steps. At first, pretreatment of fabric was performed, and then copper and silver particles were coated by the chemical reduction method. Hence, the absorbance/adherence of metal was confirmed by the deposition of particles on microfibers. The particles filled the micro spaces between the fibers and made the continuous network to facilitate the electrical conduction. Secondly, further electroplating of the metal was performed to make the compact layer on the particle- coated fabric. The fabrics were analyzed against electrical resistivity and electromagnetic shielding over the frequency range of 200 MHz to 1500 MHz. The presence of metal coating was confirmed from the surface microstructure of coated fabric samples examined by scanning electron microscopy, EDS, and XRD tests. For optimized plating parameters, the minimum surface resistivity of 67 Ω, EMI shielding of 66 dB and Ohmic heating of 118 °C at 10 V was observed. It was found that EMI SH was increased with an increase in the deposition rate of the metal. Furthermore, towards the end, the durability of conductive textiles was observed against severe washing. It was observed that even after severe washing there was an insignificant increase in electrical resistivity and good retention of the metal coating, as was also proven with SEM images.

Single Step Synthesis and Functionalization of Nano Titania for Development of Multifunctional Cotton Fabrics.

Synthesis and modification of nanoparticles to make them suitable to functionalise a substrate for various application fields involves many steps, which are complex, time-consuming, and sometimes require special equipment. This is a major drawback to meet rapid technological requirements. In this work, a procedure has been developed to modify TiO2 nanoparticles by the sol-gel method at their synthesis stage using titanium tetraisopropoxide and modifying agents including ODS and GPTMS. The prepared nanoparticle finish can be used as it is without any further processing, thus eliminating the need for extra steps required to decorate them on some substrate. The nanoparticles were characterised by SEM, EDX, FTIR, XRD, and zeta potential. The adhesion of the obtained nanoparticles was tested by applying them to a cellulosic substrate. The obtained substrate was subjected to mechanical action and adhesion efficiency was estimated on the basis of UV transmittance and antibacterial properties that showed excellent results. The hydrophobic properties of the obtained nanoparticles were assessed by measuring water contact angles, which reached 157.9°, indicating their superhydrophobic nature. The developed procedure is facile and will be suitable for the engineering of multiple surfaces.

Development of superhydrophilic and superhydrophobic polyester fabric by growing zinc oxide nanorods.

ZnO nanorods were grown on microfibers of Polyethylene terephthalate (PET) fabric by seeding method to develop hierarchical roughness structure. XRD and XPS analysis show the presence of crystalline ZnO and chemical Zn species at the fiber surface at each stage of the process. Five series of samples with different seed concentrations have been realized, and their surface morphology and topography were characterized by AFM and SEM. Increasing seed concentrations lead to samples with superhydrophilic properties. Not only the water contact angle at fabric surface tends to zero but also the water capillary diffusion inside fabric is faster. Nanostructuration affects the structure inside the fabric, and further experiments with decane liquid have been made to get a better understanding of this effect. To study the superhydrophobicity, nanorods treated samples were modified with octadecyltrimethoxysilane (ODS) by two method; solution deposition and vapor deposition. The superhydrophobicity was characterized by measuring the water contact angle and water sliding angle with 5 µl water droplet. The samples modified with ODS by vapor deposition showed higher water contact angles and low water sliding angle than the ones modified with solution method. The lotus effect has been well correlated with the surface morphology of the nanorods structured fibers. The application of the Cassie-Baxter equation is discussed.