Unique Photoactivated Time-Resolved Response in 2D GeS for Selective Detection of Volatile Organic Compounds.

Volatile organic compounds (VOCs) sensors have a broad range of applications including healthcare, process control, and air quality analysis. There are a variety of techniques for detecting VOCs such as optical, acoustic, electrochemical, and chemiresistive sensors. However, existing commercial VOC detectors have drawbacks such as high cost, large size, or lack of selectivity. Herein, a new sensing mechanism is demonstrated based on surface interactions between VOC and UV-excited 2D germanium sulfide (GeS), which provides an effective solution to distinguish VOCs. The GeS sensor shows a unique time-resolved electrical response to different VOC species, facilitating identification and qualitative measurement of VOCs. Moreover, machine learning is utilized to distinguish VOC species from their dynamic response via visualization with high accuracy. The proposed approach demonstrates the potential of 2D GeS as a promising candidate for selective miniature VOCs sensors in critical applications such as non-invasive diagnosis of diseases and health monitoring.

Ultrasensitive rapid cytokine sensors based on asymmetric geometry two-dimensional MoS2 diodes.

The elevation of cytokine levels in body fluids has been associated with numerous health conditions. The detection of these cytokine biomarkers at low concentrations may help clinicians diagnose diseases at an early stage. Here, we report an asymmetric geometry MoS2 diode-based biosensor for rapid, label-free, highly sensitive, and specific detection of tumor necrosis factor-α (TNF-α), a proinflammatory cytokine. This sensor is functionalized with TNF-α binding aptamers to detect TNF-α at concentrations as low as 10 fM, well below the typical concentrations found in healthy blood. Interactions between aptamers and TNF-α at the sensor surface induce a change in surface energy that alters the current-voltage rectification behavior of the MoS2 diode, which can be read out using a two-electrode configuration. The key advantages of this diode sensor are the simple fabrication process and electrical readout, and therefore, the potential to be applied in a rapid and easy-to-use, point-of-care, diagnostic tool.

Self-Powered, Broadband Photodetector Based on Two-Dimensional Tellurium-Silicon Heterojunction.

As a new class of two-dimensional (2D) materials and a group-VI chalcogen, tellurium (Te) has emerged as a p-type semiconductor with high carrier mobility. Potential applications include high-speed opto-electronic devices for communication. One method to enhance the performance of 2D material-based photodetectors is by integration with a IV group of semiconductors such as silicon (Si). In this work, we demonstrate a self-powered, high-speed, broadband photodetector based on the 2D Te/n-type Si heterojunction. The fabricated Te/n-type Si heterojunction exhibits high performance in the UV-vis-NIR light with a high responsivity of up to ∼250 mA/W and a photocurrent-to-dark current ratio (I on/I off) of ∼106, fast response time of 8.6 µs, and superior repeatability and stability. The results show that the fabricated Te/n-type Si heterojunction photodetector has a strong potential to be utilized in ultrafast, broadband, and efficient photodetection applications.

Thickness-modulated lateral MoS2 diodes with sub-terahertz cutoff frequency.

Thickness-modulated lateral MoS2 diodes with an extracted benchmark cutoff frequency (fc) of up to 126 GHz are implemented and fully characterised. Fabricated diodes demonstrate an on-off current ratio of more than 600 and a short circuit current responsivity at zero-bias of 7 A/W. The excellent performance achieved in our device is attributed to reduced contact resistance from using In/Au contacts and low junction capacitance due to the lateral device structure. In addition, the use of multilayer MoS2 crystals enabled relatively high current flow. Small- and large-signal models are extracted from DC and RF characterisation of the fabricated diode prototype. Extracted compact models are compared to the measured DC and S-parameters of the diode, demonstrating excellent matching between models and measurements. The presented diode is suitable for switching circuits and high frequency applications.

Preferentially oriented TiO2 nanotube arrays on non-native substrates and their improved performance as electron transporting layer in halide perovskite solar cells.

Anodically formed TiO2 nanotube arrays (TNTAs) constitute an optoelectronic platform that is being studied for use as a photoanode in photoelectrocatalytic cells, as an electron transport layer (ETL) in solar cells and photodetectors, and as an active layer for chemiresistive and microwave sensors. For optimal transport of charge carriers in these one-dimensional polycrystalline ordered structures, it is desirable to introduce a preferential texture with the grains constituting the nanotube walls aligned along the transport direction. Through x-ray diffraction analysis, we demonstrate that choosing the right water content in the anodization electrolyte and the use of a post-anodization zinc ion treatment can introduce a preferential texture in sub-micron length transparent TNTAs formed on non-native substrates. The incorporation of 1.5 atom% of Zn in TiO2 nanotubes prior to annealing, was found to consistently result in the strongest preferential orientation along the [001] direction. [001] oriented TNTAs exhibited a responsivity of 523 A W-1 at a bias of 2 V for 365 nm photons, which is among the highest reported performance values for ultraviolet photodetection using titania nanotubes. Furthermore, the textured nanotubes without a Zn2+ treatment showed a significantly enhanced performance in halide perovskite solar cells that used TNTAs as the ETL.

Composition-Tunable Formamidinium Lead Mixed Halide Perovskites via Solvent-Free Mechanochemical Synthesis: Decoding the Pb Environments Using Solid-State NMR Spectroscopy.

Mixed-halide lead perovskites are becoming of paramount interest in the optoelectronic and photovoltaic research fields, offering band gap tunability, improved efficiency, and enhanced stability compared to their single halide counterparts. Formamidinium-based mixed halide perovskites (FA-MHPs) are critical to obtaining optimum solar cell performance. Here, we report a solvent-free mechanochemical synthesis (MCS) method to prepare FA-MHPs, starting with their parent compounds (FAPbX3; X = Cl, Br, I), achieving compositions not previously accessible through the solvent synthesis (SS) technique. By probing local Pb environments in MCS FA-MHPs using solid-state nuclear magnetic resonance spectroscopy, along with powder X-ray diffraction for long-range crystallinity and reflectance measurements to determine the optical band gap, we show that MCS FA-MHPs form atomic-level solid solutions between Cl/Br and Br/I MHPs. Our results pave the way for advanced methods in atomic-level structural understanding while offering a one-pot synthetic approach to prepare MHPs with superior control of stoichiometry.

Top-Down Approaches Towards Single Crystal Perovskite Solar Cells.

Solar cells employing hybrid perovskites have proven to be a serious contender versus established thin-film photovoltaic technologies. Typically, current photovoltaic devices are built up layer by layer from a transparent substrate (bottom-up approach), while the deposition of the perovskite layer itself comes with many challenges including the control of crystal size, nucleation density and growth rate. On the other hand, single crystals have been used with great success for studying the fundamental properties of this new class of optoelectronic materials. However, optoelectronic devices fabricated from single crystals often employ different materials than in their thin film counterparts. Here, we demonstrate various top-down approaches for low-temperature processed organic-inorganic metal halide perovskite single crystal devices. Our approach uses common and well-established material combinations that are often used in polycrystalline thin film devices. The use of a polymer bezel allows easier processing of small crystals and the fabrication of solution-processed, free-standing perovskite single crystal devices. All in all these approaches can supplement other measurements of more fundamental material properties often requiring perovskite single crystals by rendering a photovoltaic characterization possible on the very same crystal with comparable material combinations as in thin film devices.

Core-shell titanium dioxide-titanium nitride nanotube arrays with near-infrared plasmon resonances.

Titanium nitride (TiN) is a ceramic with high electrical conductivity which in nanoparticle form, exhibits localized surface plasmon resonances (LSPRs) in the visible region of the solar spectrum. The ceramic nature of TiN coupled with its dielectric loss factor being comparable to that of gold, render it attractive for CMOS polarizers, refractory plasmonics, surface-enhanced Raman scattering and a whole host of sensing applications. We report core-shell TiO2-TiN nanotube arrays exhibiting LSPR peaks in the range 775-830 nm achieved by a simple, solution-based, low cost, large area-compatible fabrication route that does not involve laser-writing or lithography. Self-organized, highly ordered TiO2 nanotube arrays were grown by electrochemical anodization of Ti thin films on fluorine-doped tin oxide-coated glass substrates and then conformally coated with a thin layer of TiN using atomic layer deposition. The effects of varying the TiN layer thickness and thermal annealing on the LSPR profiles were also investigated. Modeling the TiO2-TiN core-shell nanotube structure using two different approaches, one employing effective medium approximations coupled with Fresnel coefficients, resulted in calculated optical spectra that closely matched the experimentally measured spectra. Modeling provided the insight that the observed near-infrared resonance was not collective in nature, and was mainly attributable to the longitudinal resonance of annular nanotube-like TiN particles redshifted due to the presence of the higher permittivity TiO2 matrix. The resulting TiO2-TiN core-shell nanotube structures also function as visible light responsive photocatalysts, as evidenced by their photoelectrochemical water-splitting performance under light emitting diode illumination using 400, 430 and 500 nm photons.

Halide perovskite solar cells using monocrystalline TiO2 nanorod arrays as electron transport layers: impact of nanorod morphology.

This is the first report of a 17.6% champion efficiency solar cell architecture comprising monocrystalline TiO2 nanorods (TNRs) coupled with perovskite, and formed using facile solution processing without non-routine surface conditioning. Vertically oriented TNR ensembles are desirable as electron transporting layers (ETLs) in halide perovskite solar cells (HPSCs) because of potential advantages such as vectorial electron percolation pathways to balance the longer hole diffusion lengths in certain halide perovskite semiconductors, ease of incorporating nanophotonic enhancements, and optimization between a high contact surface area for charge transfer (good) versus high interfacial recombination (bad). These advantages arise from the tunable morphology of hydrothermally grown rutile TNRs, which is a strong function of the growth conditions. Fluorescence lifetime imaging microscopy of the HPSCs demonstrated a stronger quenching of the perovskite PL when using TNRs as compared to mesoporous/compact TiO2 thin films. Due to increased interfacial contact area between the ETL and perovskite with easier pore filling, charge separation efficiency is dramatically enhanced. Additionally, solid-state impedance spectroscopy results strongly suggested the suppression of interfacial charge recombination between TNRs and perovskite layer, compared to other ETLs. The optimal ETL morphology in this study was found to consist of an array of TNRs ∼300 nm in length and ∼40 nm in width. This work highlights the potential of TNR ETLs to achieve high performance solution-processed HPSCs.

Exciton Binding Energy in Organic-Inorganic Tri-Halide Perovskites.

The recent dramatic increase in the power conversion efficiencies of organic-inorganic tri-halide perovskite solar cells has triggered intense research worldwide and created a paradigm shift in the photovoltaics field. It is crucial to develop a solid understanding of the photophysical processes underlying solar cell operation in order to both further improve the photovoltaic performance of perovskite solar cells as well as to exploit the broader optoelectronic applications of the tri-halide perovskites. In this short review, we summarize the main research findings about the binding energy of excitons in tri-halide perovskite materials and find that a value in the range of 2-22 meV at room temperature would be a safe estimate. Spontaneous free carrier generation is the dominant process taking place directly after photoexcitation in organic-inorganic tri-halide perovskites at room temperature, which eliminates the exciton diffusion bottleneck present in organic solar cells and constitutes a major contributing factor to the high photovoltaic performance of this material.