Associations among the occurrence or types of maxillary canine impaction, labial frenum attachment types, lateral incisor anomalies, and midline diastema in patients with and without impaction: A case-control study.

INTRODUCTION: We tested whether the labial frenum attachment types may affect the occurrence or type of maxillary canine impaction. METHODS: This case-control study was performed on 96 subjects (48 with maxillary canine impaction [20.50±4.99 years, 32 females], 48 controls [21.94±3.79, 31 females]). Types of canine impaction (buccal/palatal, bilateral/unilateral, left/right), types of upper lip middle frenums (mucosal, gingival, papillary), the anatomy of lateral incisors (impacted, peg shaped, small, normal), and the midline diastema were evaluated clinically and radiographically. Associations were examined using multiple binary logistic regression, 3-way repeated-measures ANCOVA, and Fisher tests (α=0.05, ß=0.2). RESULTS: The numbers of mucosal, gingival, and papillary frenums in the case group were '29, 14, and 5', respectively; in the control group, they were '25, 21, and 2' (Fisher, P=0.248). The numbers of mucosal, gingival, and papillary frenums were respectively '25, 11, and 1' in the palatally impacted canine subgroup; they were '4, 3, and 4' in the buccally impacted subgroup (Fisher, P=0.010). Abnormal laterals were present in 12 cases and 4 controls; normal laterals were observed in 36 cases and 44 controls (Fisher, P=0.053). Abnormal laterals were seen in 10 cases with palatally impacted canines and 2 cases with buccally impacted canines; normal laterals existed in 27 cases with palatally impacted canines and 9 cases with buccally impacted canines (Fisher, P=0.705). Lateral anatomy was not associated with frenum attachment (Fisher, P=0.827). Greater midline diastemas were seen in cases with maxillary canine impaction, papillary frenums, and abnormal laterals (ANCOVA, P≤0.016). CONCLUSIONS: Buccal type of canine impaction is positively associated with papillary labial frenums. Canine impaction is 3.6 folds more prevalent in cases with lateral abnormality. Midline diastema is positively and independently associated with canine impaction, papillary frenums, and abnormal laterals.

Lateral cephalometric measurements of Iranians with surgically repaired unilateral cleft lips and palates.

OBJECTIVES: Since results of surgical correction of unilateral cleft lip and palate (UCLP) are controversial, and there is no study in this regard among Iranians, this study was conducted to document lateral cephalometric measurements of such cases, with respect to age, gender, and cleft side. METHODS: In this cross-sectional study, 45 lateral cephalographs of individuals with UCLP who had undergone surgery but not orthodontic treatment were traced and 30 skeletal, dental and soft-tissue cephalometric measurements were measured. Parameters were compared between patients with UCLP and cephalometric norms. They were also compared between males and females, two age groups (≤8 and>8 years), and sides of cleft using the Student's t-test. RESULTS: Only S-N-Pog and U1-SN values were significantly different between this sample and cephalometric norms. The variables were not significantly different between males and females. However, the values of ANB, Wits appraisal, Go-Gn, Go-Pog, U1-SN, interincisal angle, distance of upper lip to Ricketts E-line, and nasopharyngeal depth were significantly different between patients≤8 and>8 years (P<0.05). The S-N-Pog angle, Wits appraisal, Go-Gn, Go-Pog, U1-SN, interincisal angle and hypopharyngeal depth were significantly different between patients with right- and left-side clefts (P<0.05). CONCLUSION: Measurements of patients with repaired UCLP were similar to cephalometric norms except for two parameters.

Shear bond strength and adhesive remnant index of orthodontic brackets bonded to enamel using adhesive systems mixed with TiO2 nanoparticles.

INTRODUCTION: It is recently suggested that titanium dioxide (TiO2) nanoparticles can be added to bracket luting agents in order to reduce bacterial activity and protect the enamel. However, it is not known if this addition can affect the shear bond strength (SBS) below clinically acceptable levels. Therefore, this study examined this matter within a comprehensive setup. METHODS: This in vitro experimental study was conducted on 120 extracted human premolars randomly divided into four groups (n=30): in groups 1 and 2, Transbond XT light-cured composite with or without TiO2 was applied on bracket base; in groups 3 and 4, Resilience light-cured composite with or without TiO2 was used. Brackets were bonded to teeth. Specimens in each group (n=30) were divided into three subgroups of 10 each; then incubated at 37°C for one day, one month, or three months. The SBS and adhesive remnant index (ARI) were calculated and compared statistically within groups. RESULTS: The SBS was not significantly different at one day, one month or three months (p>0.05) but composites without TiO2 had a significantly higher mean SBS than composites containing TiO2 (p<0.001). The SBS of Transbond XT was significantly higher than that of Resilience (p<0.001). No significant differences were noted in ARI scores based on the type of composite or addition of TiO2 (p>0.05). CONCLUSIONS: Addition of TiO2 nanoparticles to Transbond XT decreased its SBS to the level of SBS of Resilience without TiO2; thus, TiO2 nanoparticles may be added to Transbond XT composite for use in the clinical setting.

Shear bond strength and adhesive remnant index of orthodontic brackets bonded to enamel using adhesive systems mixed with TiO2 nanoparticles

ABSTRACT Introduction: It is recently suggested that titanium dioxide (TiO2) nanoparticles can be added to bracket luting agents in order to reduce bacterial activity and protect the enamel. However, it is not known if this addition can affect the shear bond strength (SBS) below clinically acceptable levels. Therefore, this study examined this matter within a comprehensive setup. Methods: This in vitro experimental study was conducted on 120 extracted human premolars randomly divided into four groups (n=30): in groups 1 and 2, Transbond XT light-cured composite with or without TiO2 was applied on bracket base; in groups 3 and 4, Resilience light-cured composite with or without TiO2 was used. Brackets were bonded to teeth. Specimens in each group (n=30) were divided into three subgroups of 10 each; then incubated at 37°C for one day, one month, or three months. The SBS and adhesive remnant index (ARI) were calculated and compared statistically within groups. Results: The SBS was not significantly different at one day, one month or three months (p>0.05) but composites without TiO2 had a significantly higher mean SBS than composites containing TiO2 (p<0.001). The SBS of Transbond XT was significantly higher than that of Resilience (p<0.001). No significant differences were noted in ARI scores based on the type of composite or addition of TiO2 (p>0.05). Conclusions: Addition of TiO2 nanoparticles to Transbond XT decreased its SBS to the level of SBS of Resilience without TiO2; thus, TiO2 nanoparticles may be added to Transbond XT composite for use in the clinical setting.

RESUMO Introdução: recentemente, sugeriu-se que nanopartículas de dióxido de titânio (TiO2) poderiam ser adicionadas ao cimento adesivo para reduzir a atividade bacteriana e proteger o esmalte. Entretanto, não se sabe se esse acréscimo pode reduzir a resistência adesiva ao cisalhamento (RAC) a níveis inferiores aos clinicamente aceitáveis. Assim, o presente estudo examinou essa questão dentro de um contexto abrangente. Métodos: esse estudo experimental in vitro foi realizado em 120 pré-molares humanos, aleatoriamente divididos em quatro grupos (n=30). Nos grupos 1 e 2, o adesivo fotopolimerizável Transbond XT com e sem TiO2 foi aplicado na base do braquete. Nos grupos 3 e 4, utilizou-se o adesivo fotopolimerizável Resilience com e sem TiO2. Os braquetes foram colados aos dentes e as amostras de cada grupo (n=30) foram divididas em três subgrupos de dez amostras cada, as quais foram incubadas a 37°C por, respectivamente, um dia, um mês e três meses. A RAC e o índice de adesivo remanescente (IAR) foram calculados e estatisticamente comparados entre os grupos. Resultados: a RAC não apresentou diferença significativa após um dia, um mês ou três meses (p > 0,05), mas os adesivos sem TiO2 apresentaram uma RAC média significativamente mais elevada do que os adesivos que continham TiO2 (p< 0,001). A RAC do Transbond XT foi significativamente mais elevada do que a do Resilience (p< 0,001). Não foram observadas diferenças significativas nos IARs, seja para o tipo de adesivo ou para a adição de TiO2 (p> 0,05). Conclusões: a adição de nanopartículas de TiO2 ao Transbond XT reduziu sua RAC a níveis semelhantes aos da RAC do Resilience TiO2. Assim, as nanopartículas de TiO2 podem ser acrescentadas ao adesivo Transbond XT para a aplicação clínica.

Comparison of bracket bond strength to etched and unetched enamel under dry and wet conditions using Fuji Ortho LC glass-ionomer.

Background. Acid etching prior to orthodontic bracket bonding may result in enamel wear or cracks following bracket removal. The manufacturer of Fuji Ortho LC glass-ionomer (GI) claims that it can bond brackets to wet unetched enamel. This study aimed to compare the bracket bond strength to etched and unetched enamel under dry and wet conditions. Methods. In this in vitro study, 60 intact premolar teeth were randomly assigned to 6 groups (etched and dried, etched and moistened with distilled water, etched and moistened with saliva, unetched and dried, unetched and moistened with water, unetched and moistened with saliva). In all the groups, Leon 4 brackets were bonded to the enamel using Fuji Ortho LC GI. The teeth were immersed in distilled water at 37°C for 24 hours and subjected to shear loads at a crosshead speed of 5 mm/min in a Zwick machine for bond strength testing. Data were analyzed with ANOVA, Tukey test and independent t-test. Results . The mean bond strength values in groups 1 (etched, dry), 2 (etched, moistened with water), 3 (etched, moistened with saliva), 4 (unetched, dry), 5 (unetched, moistened with water) and 6 (unetched, moistened with saliva) were 21.86, 16.46, 10.49, 8.12, 9.15 and 9.52 MPa, respectively. Significant differences in bond strength were detected between groups 1 and 2 and all the other groups (P < 0.05), with no significant difference between groups 1 and 2 (P > 0.05). Conclusion. Fuji Ortho LC GI provided adequate bond strength between brackets and enamel. To acquire higher bond strength, brackets must be bonded to etched and dried enamel.

Erratum to: Comparison of bracket bond strength to etched and unetched enamel under dry and wet conditions using Fuji Ortho LC glass-ionomer.

[This corrects the article DOI: 10.15171/joddd.2017.006.].

Stability of changes in mandibular intermolar and intercuspid distances following orthodontic treatment.

BACKGROUND: The aim of this study was to determine the pattern and amount of change exhibited in mandibular intercanine and intermolar width during treatment and assessing its stability1-3 years post-retention. MATERIALS AND METHODS: The material consisted of 70 cases of which 20 cases were treated without extraction and 30 cases were treated with extraction, which were compared with 20 untreated cases which served as a control group. A series of three measurements were made for each case of the treated group: At the beginning of treatment, end of active treatment and 1-3 years post-retention; and for the control group: At 12, 15 and 18 years of age. The Wilcoxon signed ranks test was used to evaluate treatment changes in each group. The Kruskal-Wallis H test was used to compare the treatment changes between the 3 groups (α = 0.05). SPSS 16 software (SPSS Inc., Chicago, IL, USA) was used to evaluate the data. RESULTS: Mean changes of intercanine width for three groups was -0.5 mm for control group, -0.26 mm for non-extraction group and +0.18 mm for extraction group. Intermolar width of the extraction group decreased significantly during treatment. In contrast to the extraction group, the control and non-extraction groups both demonstrated an increase in mean intermolar width which was 0.66 mm and 0.91 mm respectively. CONCLUSION: It was concluded that although mean changes of intercanine and intermolar width were statistically significant but they were not perceptible clinically.