Synthesis and Degradation Properties of Sericin/PVA Hydrogels.

One method of treating diabetic foot ulcers, mainly superficial and deep ulcers, is using a wound dressing in the form of a hydrogel. Sericin derived from silkworm cocoons is a promising hydrogel material candidate because it has anti-inflammatory properties and stimulates collagen production. Sericin was combined with PVA to increase the stability of the resulting hydrogel. Sericin/PVA hydrogel was prepared using the freeze-thawing method with variations in the solution concentration and volume ratio of PVA and sericin. Sericin was successfully extracted using an autoclave method. The FTIR results confirmed that sericin extracted from the cocoon had a dominant secondary structure in the form of a ß-sheet. Hydrogel with a concentration of 4% with a 1:1 ratio of PVA and sericin showed good stability and resulted in a hydrogel with characteristics that combine PVA and sericin. The resulting hydrogel had an average pore size range of 24-191 µm and a porosity range of 70-85%, which meets the requirements for wound dressings. Through degradation testing in PBS solution, it was found that the sericin/PVA hydrogel experienced degradation of 60-75% after 672 h of testing.

In Vitro Biocompatibility of Hydrogel Polyvinyl Alcohol/Moringa oleifera Leaf Extract/Graphene Oxide for Wound Dressing.

Hydrogel-based wound dressings are often chosen for healing diabetic foot ulcers (DFU) in combination with herbal extracts. Moringa oleifera leaf (MOL) extract is a potent herb containing antimicrobial and anti-inflammatory bioactive substances. In this work, wound dressings based on polyvinyl alcohol (PVA), MOL extract, and graphene oxide (GO) were developed for DFU wound dressing. The PVA/MOL/GO hydrogel was synthesized using four cycles of a freeze-thaw process with varying concentrations of MOL extract. All hydrogels showed a water content of 83-88% and an equilibrium swelling ratio between 155-171%. After degradation in phosphate-buffered saline, the hydrogels showed a more open porous structure. We observed a degradation rate of 26-28%. Although the increase in MOL extract reduced the tensile strength of the hydrogel, the addition of GO increased the tensile strength. The PVA/MOL/GO hydrogel showed the highest antibacterial activity, with a reduction of 94% Gram-positive S. aureus and 82% Gram-negative E. coli. Finally, all samples possessed appropriate cytocompatibility with cell viability reaching 83-135% in 3T3L1 mouse fibroblast cells. This result was verified by in vitro wound-healing analysis performed by scratch assay. This study presents the potency of combined PVA, MOL, and GO as a biocompatible DFU wound dressing.

Green Synthesis of Silver Nanoparticles Using Extract of Cilembu Sweet Potatoes (Ipomoea batatas L var. Rancing) as Potential Filler for 3D Printed Electroactive and Anti-Infection Scaffolds.

Electroactive biomaterials are fascinating for tissue engineering applications because of their ability to deliver electrical stimulation directly to cells, tissue, and organs. One particularly attractive conductive filler for electroactive biomaterials is silver nanoparticles (AgNPs) because of their high conductivity, antibacterial activity, and ability to promote bone healing. However, production of AgNPs involves a toxic reducing agent which would inhibit biological scaffold performance. This work explores facile and green synthesis of AgNPs using extract of Cilembu sweet potato and studies the effect of baking and precursor concentrations (1, 10 and 100 mM) on AgNPs' properties. Transmission electron microscope (TEM) results revealed that the smallest particle size of AgNPs (9.95 ± 3.69 nm) with nodular morphology was obtained by utilization of baked extract and ten mM AgNO3. Polycaprolactone (PCL)/AgNPs scaffolds exhibited several enhancements compared to PCL scaffolds. Compressive strength was six times greater (3.88 ± 0.42 MPa), more hydrophilic (contact angle of 76.8 ± 1.7°), conductive (2.3 ± 0.5 × 10-3 S/cm) and exhibited anti-bacterial properties against Staphylococcus aureus ATCC3658 (99.5% reduction of surviving bacteria). Despite the promising results, further investigation on biological assessment is required to obtain comprehensive study of this scaffold. This green synthesis approach together with the use of 3D printing opens a new route to manufacture AgNPs-based electroactive with improved anti-bacterial properties without utilization of any toxic organic solvents.

Physically crosslinked PVA/graphene-based materials/aloe vera hydrogel with antibacterial activity.

Burn is a major skin injury that occurs worldwide. For second-degree burns, special treatment should be given for creating a suitable wound healing environment. Hydrogel wound dressing as the primary care should possess extra properties that include antibacterial activity and cytocompatibility to enhance the treatment effectiveness. Additional therapy such as electrical stimulation can be applied as well promote wound healing. Herein, we used the tissue engineering concept to create a novel antibacterial and cytocompatible hydrogel made of polyvinyl alcohol (PVA), graphene-based material (GBM), and aloe vera extract (Av) through the freeze-thaw process. We prepared the PVA/GBM/Av hydrogel and examined its potential as a wound dressing. We found that it exhibited excellent hydrophilicity with a contact angle between 15 and 31 degrees and electrical conductivity within the range of 0.0102-0.0154 S m-1, which is comparable to that of the human skin tissue and possesses tensile strength up to 1.5 MPa with elongation of 405%. It also demonstrated good stability in phosphate buffer saline with a weight ratio of 73-80% after 14 days of immersion. We presented that the addition of graphene and graphene oxide (GO) inhibited the growth of Gram-positive Staphylococcus aureus ATCC 6538 with the lowest bacterial population observed in PVA/GO, which is 1.74 × 107 cfu mL-1 after 1 day incubation and 99.94% bacterial reduction. Furthermore, our PVA/GBM/Av showed no toxicity to 3T3 fibroblast cells after 48 h with viability up to 295% for PVA/GO/Av. In summary, our fabricated hydrogels have shown their potential as wound dressing with antibacterial and non-cytotoxic properties.

Physical-Chemical Crosslinked Electrospun Colocasia esculenta Tuber Protein-Chitosan-Poly(Ethylene Oxide) Nanofibers with Antibacterial Activity and Cytocompatibility.

BACKGROUND: Electrospun nanofibers based on Colocasia esculenta tuber (CET) protein are considered as a promising material for wound dressing applications. However, the use of these nanofibers in aqueous conditions has poor stability. The present study was performed to obtain insights into the crosslinked electrospun CET's protein-chitosan (CS)-poly(ethylene oxide) (PEO) nanofibers and to evaluate their potential for wound dressing applications. METHODS: The electrospun nanofibers were crosslinked with glutaraldehyde (GA) vapor and heat treatment (HT) to enhance their physicochemical stability. The crosslinked nanofibers were characterized by protein profiles, morphology structures, thermal behavior, mechanical properties, and degradation behavior. Furthermore, the antibacterial properties and cytocompatibility were analyzed by antibacterial assessment and cell proliferation. RESULTS: The protein profiles of the electrospun CET's protein-CS-PEO nanofibers before and after HT crosslinking contained one major bioactive protein with a molecular weight of 14.4 kDa. Scanning electron microscopy images of the crosslinked nanofibers indicated preservation of the structure after immersion in phosphate buffered saline. The crosslinked nanofibers resulted in higher ultimate tensile strength and lower ultimate strain compared to the non-crosslinked nanofibers. GA vapor crosslinking showed higher water stability compared to HT crosslinking. The in vitro antibacterial activity of the crosslinked nanofibers showed a stronger bacteriostatic effect on Staphylococcus aureus than on Escherichia coli. Human skin fibroblast cell proliferation on crosslinked GA vapor and HT nanofibers with 1% (w/v) CS and 2% (w/v) CET's protein demonstrated the highest among all the other crosslinked nanofibers after seven days of cell culture. Cell proliferation and cell morphology results revealed that introducing higher CET's protein concentration on crosslinked nanofibers could increase cell proliferation of the crosslinked nanofibers. CONCLUSION: These results are promising for the potential use of the crosslinked electrospun CET's protein-CS-PEO nanofibers as bioactive wound dressing materials.

Preparation and post-functionalization of hyperbranched polyurea coatings.

Postfunctionalizable hyperbranched polyurea coatings were prepared by the bulk polycondensation of AB2 monomers on preactivated silicon substrates. As previously shown, AB2 monomers were prepared, comprising a secondary amino group (A) and two blocked isocyanates (B) connected by hexyl spacers, in a single step and in quantitative yields. Covalent anchoring of the coatings on substrates was accomplished by reacting the secondary amino group in the focal point of the polymers with the blocked isocyanates (BIs) of the covalently attached coupling agent. The BIs in the top layer of the coatings were storage-stable under ambient conditions but well-modifiable with amino- or hydroxyl-functional compounds on heating. Attachment of polyethylene glycol or perfluoro-1-decanol afforded hydrophilic or hydrophobic surfaces. Immobilization and quaternization of polyethylenimines yielded highly charged surfaces. The coatings were extensively characterized by a number of techniques, such as Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, atomic force microscopy, ellipsometry, and contact -angle measurements.

Survival of adhering staphylococci during exposure to a quaternary ammonium compound evaluated by using atomic force microscopy imaging.

Effects of a quaternary ammonium compound (QAC) on the survival of adhering staphylococci on a surface were investigated using atomic force microscopy (AFM). Four strains with different minimal inhibitory concentrations (MIC) and minimal bactericidal concentrations (MBC) for the QAC were exposed to three different concentrations of the QAC in potassium phosphate buffer (0.5×, 1×, and 2× MBC) while adhering to glass. Adhering staphylococci were repeatedly imaged with AFM in the contact mode, and the cell surface was found to wrinkle upon progressive exposure to the QAC until bacteria disappeared from the substratum. Higher concentrations of QAC yielded faster wrinkling and the disappearance of bacteria during imaging. Two slime-producing staphylococcal strains survived longer on the surface than two non-slime-producing strains despite similar MICs and MBCs. All staphylococci adhering in unscanned areas remained adhering during exposure to QAC. Since MICs and MBCs did not relate to bacterial cell surface hydrophobicities and zeta potentials, survival on the surface is probably not determined by the direct interaction of QAC molecules with the cell surface. Instead, it is suggested that the pressure of the AFM tip assists the incorporation of QAC molecules in the membrane and enhances their bactericidal efficacy. In addition, the prolonged survival under pressure from slime-producing strains on a surface may point to a new protective role of slime as a stress absorber, impeding the incorporation of QAC molecules. The addition of Ca(2+) ions to a QAC solution yielded longer survival of intact, adhering staphylococci, suggesting that Ca(2+) ions can impede the exchange of membrane Ca(2+) ions required for QAC incorporation.