Soil pH, developmental stages and geographical origin differently influence the root metabolomic diversity and root-related microbial diversity of Echium vulgare from native habitats.

Improved understanding of the complex interaction between plant metabolism, environmental conditions and the plant-associated microbiome requires an interdisciplinary approach: Our hypothesis in our multiomics study posited that several environmental and biotic factors have modulating effects on the microbiome and metabolome of the roots of wild Echium vulgare plants. Furthermore, we postulated reciprocal interactions between the root metabolome and microbiome. We investigated the metabolic content, the genetic variability, and the prokaryotic microbiome in the root systems of wild E. vulgare plants at rosette and flowering stages across six distinct locations. We incorporated the assessment of soil microbiomes and the measurement of selected soil chemical composition factors. Two distinct genetic clusters were determined based on microsatellite analysis without a consistent alignment with the geographical proximity between the locations. The microbial diversity of both the roots of E. vulgare and the surrounding bulk soil exhibited significant divergence across locations, varying soil pH characteristics, and within the identified plant genetic clusters. Notably, acidophilic bacteria were characteristic inhabitants of both soil and roots under acidic soil conditions, emphasizing the close interconnectedness between these compartments. The metabolome of E. vulgare significantly differed between root samples from different developmental stages, geographical locations, and soil pH levels. The developmental stage was the dominant driver of metabolome changes, with significantly higher concentrations of sugars, pyrrolizidine alkaloids, and some of their precursors in rosette stage plant roots. Our study featured the complex dynamics between soil pH, plant development, geographical locations, plant genetics, plant metabolome and microbiome, shedding light on existing knowledge gaps.

Antioxidant Activity, Inhibition of Intestinal Cancer Cell Growth and Polyphenolic Compounds of the Seagrass Posidonia oceanica's Extracts from Living Plants and Beach Casts.

The aim of the present study was to investigate the use of Posidonia oceanica for making products beneficial for human health. Firstly, we demonstrated that the antioxidant defense (i.e., SOD and APX activity) of P. oceanica's living leaves (LP) has low efficacy, as they partly neutralize the produced H2O2. However, high H2O2 levels led LP to produce, as a response to oxidative stress, high phenolic content, including chicoric acid, p-coumaric acid, caftaric acid, trans-cinnamic and rutin hydrate, as shown by UHPLC-DAD analysis. In addition, LP extracts inhibited intestinal cancer cell proliferation. Moreover, P. oceanica's beach casts consisting of either Wet 'Necromass' (WNP) or Dry 'Necromass' (DNP) were used for preparing extracts. Both DNP and WNP exhibited antioxidant and antiproliferative activities, although lower as compared to those of LP extracts. Although both P. oceanica's meadows and beach casts are considered priority habitats in the Mediterranean Sea due to their high ecological value, legislation framework for beach casts forbidding their removal is still missing. Our results suggested that both LP and DNP could be utilized for the production of high-added value products promoting human health, provided that a sustainability management strategy would be applied for P. oceanica's meadows and beach casts.

Effects of fungal endophytes and arbuscular mycorrhizal fungi on growth of Echium vulgare and alkannin/shikonin and their derivatives production in roots.

Endophytic fungi as well as arbuscular mycorrhizal fungi (AMF) are known to stimulate plant growth and production of secondary metabolites in medicinal plants. Here, 10 endophytic fungi isolated from roots of wild Alkanna tinctoria plants and 5 AMF purchased from the Glomeromycota in vitro collection were evaluated, during two successive three-month greenhouse experiments, on the growth of Echium vulgare and alkannin/shikonin and their derivatives (A/Sd) production in the roots. Some of the endophytic fungi tested significantly increased plant growth parameters as compared to the control: Cladosporium allicinum, Cadophora sp., Clonostachys sp., Trichoderma hispanicum and Leptosphaeria ladina increased root volume, Plectosphaerella sp. And T. hispanicum root fresh weight and root water retention and T. hispanicum plant water retention. However, none of these fungi impacted A/Sd production. Conversely, none of the AMF strains tested impacted plant growth parameters, but those inoculated with Rhizophagus intraradices MUCL 49410 had a significantly higher concentration of alkannin/shikonin (A/S), acetyl-A/S, ß,ß- dimethylacryl-A/S, isovaleryl-A/S and total A/Sd, compared to the control plants. Further studies are needed to investigate the mechanisms involved in the production of A/Sd in plants associated to specific endophytic fungi/AMF and on the cultivation conditions required for optimal production of these compounds.

Multidimensional 3D-Printed Scaffolds and Regeneration of Intrabony Periodontal Defects: A Systematic Review.

BACKGROUND: The utilization of regenerative techniques in periodontology involves tailoring tissue engineering principles to suit the oral cavity's unique environment. Advancements in computer-assisted technology, specifically utilizing cone beam computed tomography (CBCT), enabled the fabrication of 3D-printed scaffolds. The current review aims to explore whether 3D-printed scaffolds are effective in promoting osteogenesis in patients with periodontal defects. METHODS: A thorough exploration was undertaken across seven electronic databases (PubMed, Scopus, ScienceDirect, Google Scholar, Cochrane, Web of Science, Ovid) to detect pertinent research in accordance with specified eligibility criteria, aligning with the PRISMA guidelines. Two independent reviewers undertook the screening and selection of manuscripts, executed data extraction, and evaluated the bias risk using the Newcastle-Ottawa Scale for non-randomized clinical trials and SYRCLE's risk of bias tool for animal studies. RESULTS: Initially, 799 articles were identified, refined by removing duplicates. After evaluating 471 articles based on title and abstract, 18 studies remained for full-text assessment. Eventually, merely two manuscripts fulfilled all the eligibility criteria concerning human trials. Both studies were prospective non-randomized clinical trials. Moreover, 11 animal studies were also included. CONCLUSIONS: The use of multidimensional, 3D-printed, customized scaffolds appears to stimulate periodontal regeneration. While the reported results are encouraging, additional studies are required to identify the ideal characteristics of the 3D scaffold to be used in the regeneration of periodontal tissue.

The Role of Cone Beam Computed Tomography in Periodontology: From 3D Models of Periodontal Defects to 3D-Printed Scaffolds.

The treatment of osseous defects around teeth is a fundamental concern within the field of periodontology. Over the years, the method of grafting has been employed to treat bone defects, underscoring the necessity for custom-designed scaffolds that precisely match the anatomical intricacies of the bone cavity to be filled, preventing the formation of gaps that could allow the regeneration of soft tissues. In order to create such a patient-specific scaffold (bone graft), it is imperative to have a highly detailed 3D representation of the bone defect, so that the resulting scaffold aligns with the ideal anatomical characteristics of the bone defect. In this context, this article implements a workflow for designing 3D models out of patient-specific tissue defects, fabricated as scaffolds with 3D-printing technology and bioabsorbable materials, for the personalized treatment of periodontitis. The workflow is based on 3D modeling of the hard tissues around the periodontal defect (alveolar bone and teeth), scanned from patients with periodontitis. Specifically, cone beam computed tomography (CBCT) data were acquired from patients and were used for the reconstruction of the 3D model of the periodontal defect. The final step encompasses the 3D printing of these scaffolds, employing Fused Deposition Modeling (FDM) technology and 3D-bioprinting, with the aim of verifying the design accuracy of the developed methodοlogy. Unlike most existing 3D-printed scaffolds reported in the literature, which are either pre-designed or have a standard structure, this method leads to the creation of highly detailed patient-specific grafts. Greater accuracy and resolution in the macroarchitecture of the scaffolds were achieved during FDM printing compared to bioprinting, with the standard FDM printing profile identified as more suitable in terms of both time and precision. It is easy to follow and has been successfully employed to create 3D models of periodontal defects and 3D-printed scaffolds for three cases of patients, proving its applicability and efficiency in designing and fabricating personalized 3D-printed bone grafts using CBCT data.

Occurrence of Luteolin in the Greek Flora, Isolation of Luteolin and Its Action for the Treatment of Periodontal Diseases.

Higher plants possess the ability to synthesize a great number of compounds with many different functions, known as secondary metabolites. Polyphenols, a class of flavonoids, are secondary metabolites that play a crucial role in plant adaptation to both biotic and abiotic environments, including UV radiation, high light intensity, low/high temperatures, and attacks from pathogens, among others. One of the compounds that has received great attention over the last few years is luteolin. The objective of the current paper is to review the extraction and detection methods of luteolin in plants of the Greek flora, as well as their luteolin content. Furthermore, plant species, crop management and environmental factors can affect luteolin content and/or its derivatives. Luteolin exhibits various biological activities, such as cytotoxic, anti-inflammatory, antioxidant and antibacterial ones. As a result, luteolin has been employed as a bioactive molecule in numerous applications within the food industry and the biomedical field. Among the different available options for managing periodontitis, dental care products containing herbal compounds have been in the spotlight owing to the beneficial pharmacological properties of the bioactive ingredients. In this context, luteolin's anti-inflammatory activity has been harnessed to combat periodontal disease and promote the restoration of damaged bone tissue.

3D-Printed Antibacterial Scaffolds for the Regeneration of Alveolar Bone in Severe Periodontitis.

Current clinical treatment of periodontitis alleviates periodontal symptoms and helps to keep the disease under control for extended periods. Despite this, a significant destruction of the tooth's underlying bone tissue often takes place progressively. Herein, we present a two-way therapeutic approach for local delivery of antibacterial agents and bone tissue regeneration, incorporating ~1% w/w tetracycline hydrochloride (TCH) into a 3D-printed scaffold composed of poly(ε-caprolactone) (PCL). Samples were assessed for their morphological, physicochemical, pharmacokinetic, and antibacterial properties. Furthermore, osteoprecursor cells (MC3T3-E1) were employed to evaluate the osteoinductive potential of the drug-loaded scaffolds. Cell proliferation, viability, and differentiation were determined on all cell-seeded scaffolds. At the end of the culture, PCL-TCH scaffolds promoted abundant collagen organic matrix, demonstrating augmented alkaline phosphatase (ALP) activity and areas of accumulated mineralised bone tissue, despite their belayed cell proliferation. Based on the observed effectiveness of the PCL-TCH scaffolds to inhibit Staphylococcus aureus, these constructs could serve as an alternative bioactive implant that supports bacterial inhibition and favours a 3D microenvironment for bone tissue regeneration in severe periodontitis.

A Review of the Role of Natural Products as Treatment Approaches for Xerostomia.

Xerostomia, commonly known as dry mouth, is a widespread oral health malfunction characterized by decreased salivary flow. This condition results in discomfort, impaired speech and mastication, dysphagia, heightened susceptibility to oral infections, and ultimately, a diminished oral health-related quality of life. The etiology of xerostomia is multifaceted, with primary causes encompassing the use of xerostomic medications, radiation therapy to the head and neck, and systemic diseases such as Sjögren's syndrome. Consequently, there is a growing interest in devising management strategies to address this oral health issue, which presents significant challenges due to the intricate nature of saliva. Historically, natural products have served medicinal purposes, and in contemporary pharmaceutical research and development, they continue to play a crucial role, including the treatment of xerostomia. In this context, the present review aims to provide an overview of the current state of knowledge regarding natural compounds and extracts for xerostomia treatment, paving the way for developing novel therapeutic strategies for this common oral health issue.

Bacterial responses to plant antimicrobials: the case of alkannin and shikonin derivatives.

Alkannin, shikonin and their derivatives (A/S) are secondary metabolites produced in the roots of certain plants of the Boraginaceae family such as Lithospermum erythrorhizon Siebold & Zucc. and Alkanna tinctoria (L.) Tausch. These naphthoquinones express anti-cancer, wound healing, and antimicrobial activities. To study the interactions between endophytic bacteria isolated from A. tinctoria and the antimicrobials A/S, endophytic bacteria known to be resistant to the compounds were screened for their effect on A/S in liquid medium. Thereafter, the strain Pseudomonas sp. R-72008, was selected and tested for its ability to modify A/S in nutrient medium and minimal medium with A/S as sole carbon source. Bacterial growth was recorded, and high performance liquid chromatography-diode array and ultra-high performance liquid chromatography-electrospray ionization-mass spectrometry analyses were performed to detect and quantify metabolites. In nutrient medium inoculated with R-72008, a decrease in the amount of A/S monomers initially present was observed and correlated with an increase of A/S oligomers. Moreover, a significant decrease of initial A/S monomers in minimal medium was correlated with bacterial growth, showing for the first time that a bacterial strain, Pseudomonas sp. R-72008, was able to use the naphthoquinones A/S as sole carbon source. This study opens new perspectives on the interactions between bacteria and plant antimicrobials.

Antioxidant Activity and Inhibition of Liver Cancer Cells' Growth of Extracts from 14 Marine Macroalgae Species of the Mediterranean Sea.

Macroalgae exhibit beneficial bioactivities for human health. Thus, the aim of the present study was to examine the antioxidant and anticancer potential of 14 macroalgae species' extracts, namely, Gigartina pistillata, Gigartina teedei, Gracilaria gracilis, Gracilaria sp., Gracilaria bursa pastoris, Colpomenia sinuosa, Cystoseira amentacea, Cystoseira barbata, Cystoseira compressa, Sargassum vulgare, Padina pavonica, Codium fragile, Ulva intestinalis, and Ulva rigida, from the Aegean Sea, Greece. The antioxidant activity was assessed using DPPH, ABTS•+, •OH, and O2•- radicals' scavenging assays, reducing power (RP), and protection from ROO•-induced DNA plasmid damage assays. Moreover, macroalgae extracts' total polyphenol contents (TPCs) were assessed. Extracts' inhibition against liver HepG2 cancer cell growth was assessed using the XTT assay. The results showed that G. teedei extract's IC50 was the lowest in DPPH (0.31 ± 0.006 mg/mL), ABTS•+ (0.02 ± 0.001 mg/mL), •OH (0.10 ± 0.007 mg/mL), O2•- (0.05 ± 0.003 mg/mL), and DNA plasmid breakage (0.038 ± 0.002 mg/mL) and exhibited the highest RP (RP0.5AU 0.24 ± 0.019 mg/mL) and TPC (12.53 ± 0.88 mg GAE/g dw). There was also a significant correlation between antioxidant activity and TPC. P. pavonica (IC50 0.93 ± 0.006 mg/mL) exhibited the highest inhibition against HepG2 cell growth. Conclusively, some of the tested extracts exhibited significant chemopreventive properties, and so they may be used for food products.

Optimizing the Distillation of Greek Oregano-Do Process Parameters Affect Bioactive Aroma Constituents and In Vitro Antioxidant Activity?

The aim of the present work was to optimize the conditions of the distillation process at a pilot scale to maximize the yield of specific bioactive compounds of the essential oil of oregano cultivated in Greece, and subsequently to study the in vitro antioxidant activity of these oils. Steam distillation was conducted at an industrial distillery and a Face-Centered Composite (FCC) experimental design was applied by utilizing three distillation factors: time, steam pressure and temperature. Essential oil composition was determined by static headspace gas chromatography-mass spectrometry (HS-GC/MS). To obtain a comprehensive profile of the essential oils, instrumental parameters were optimized, including sample preparation, incubation conditions, sampling process, injection parameters, column thermal gradient and MS conditions. With the applied GC-MS method, more than 20 volatile compounds were identified in the headspace of the oregano essential oils and their relative percentages were recorded. Carvacrol was the most prominent constituent under all distillation conditions applied. Data processing revealed time as the main factor which most affected the yield. The Desired Space (DSc) was determined by conducting a three-dimensional response surface analysis of the independent and dependent variables, choosing yields of thymol and carvacrol as optimization criteria. The in vitro antioxidant activity of the essential oils of all samples was measured in terms of the interaction with the stable free radical 2,2-diphenyl-1-picrylhydrazyl (DPPH) after 20 and 60 min. The most prominent essential oils at different distillation conditions were also tested as inhibitors of lipid peroxidation. Higher % values of carvacrol and thymol were correlated to higher antioxidant activity. Evaluating the impact of the distillation conditions on the in vitro results, it seems that lower pressure, less time and higher temperature are crucial for enhanced antioxidant activities.

µ-Raman Determination of Essential Oils' Constituents from Distillates and Leaf Glands of Origanum Plants.

A novel, inexpensive and simple experimental setup for collecting µ-Raman spectra of volatile liquids in very small quantities was developed. It takes advantage of capillary forces to detain minute volatile liquid volumes. Spectra of volatile and even scattering or absorbing media can be measured more effectively. The method is used to facilitate the collection of intensity-consistent Raman spectra from a series of reference compounds present in Origanum essential oils, in order to quantify their constituents by multiple linear regression. Wild grown Origanum plants, collected from five different regions in Greece and taxonomically identified as O. onites, O. vulgare subsp. hirtum and O. vulgare subsp. vulgare, were appropriately distilled to acquire their essential oils. Comparison of the Raman results with those from headspace gas chromatography-mass spectrometry (HS GC-MS) confirmed the successful relative quantification of the most abundant essential oil constituents, highlighting the similarities and differences of the three Origanum taxa examined. Finally, it is demonstrated that directly measuring the leaf peltate glandular hairs yields exploitable results to identify the main components of the essential oil they contain, underlining the potential of in situ (field or industry) measurements utilizing microscope-equipped portable Raman spectrometers.

Unravelling the Chemotaxonomic Identity of "White" and "Black" Oregano (Origanum vulgare) in Northern Greece.

The two types of oregano used by the inhabitants of the villages of Μount Belles (GR1260001), the "white" oregano with white flowers and "black" oregano with purple flowers, were studied. The two oregano types were collected from five localities along an altitudinal gradient from 217 m up to 1299 m. "White" oregano, was found in the three lowland regions (up to 752 m) where the Pannonian-Balkanic turkey oak-sessile oak forest habitat (code 91M0) dominates. The "black" oregano was collected from the two higher altitudes, at 1177 m and 1299 m, where the Asperulo-Fagetum beech forest habitat (9130) occurs. Measurements of the density and size of peltate glandular hairs (sessile glands) on calyces, bracts, and leaves suggest that "white" oregano is distinguished by its conspicuous - apparently larger - glands. These differences were reflected in the total essential oil content, with the "white" oregano being much richer (up to 4.3 mL/100 g dry weight) than the "black" (up to 0.6%). Striking differences have also been found in the volatile fraction of their essential oil composition. The "white" oregano oils were characterized by the high content of carvacrol (up to 92.6% of identified peaks, by Headspace GC-MS). On the other hand, the two "black" oregano oils have a different aromatic profile, first reported from Greece, with main components including the sesquiterpenes ß-caryophyllene, D-germacrene, δ-cadinene and ß-bisabolene. The results so far indicate that "white" and "black" oregano, Origanum vulgare subsp. hirtum and subsp. vulgare respectively, can be clearly distinguished either by their morphological (glandular) differences or by chemical (essential oil) composition.

Dynamics of alkannin/shikonin biosynthesis in response to jasmonate and salicylic acid in Lithospermum officinale.

Alkannin/shikonin and their derivatives are specialised metabolites of high pharmaceutical and ecological importance exclusively produced in the periderm of members of the plant family Boraginaceae. Previous studies have shown that their biosynthesis is induced in response to methyl jasmonate but not salicylic acid, two phytohormones that play important roles in plant defence. However, mechanistic understanding of induction and non-induction remains largely unknown. In the present study, we generated the first comprehensive transcriptomic dataset and metabolite profiles of Lithospermum officinale plants treated with methyl jasmonate and salicylic acid to shed light on the underlying mechanisms. Our results highlight the diverse biological processes activated by both phytohormones and reveal the important regulatory role of the mevalonate pathway in alkannin/shikonin biosynthesis in L. officinale. Furthermore, by modelling a coexpression network, we uncovered structural and novel regulatory candidate genes connected to alkannin/shikonin biosynthesis. Besides providing new mechanistic insights into alkannin/shikonin biosynthesis, the generated methyl jasmonate and salicylic acid elicited expression profiles together with the coexpression networks serve as important functional genomic resources for the scientific community aiming at deepening the understanding of alkannin/shikonin biosynthesis.

Root-associated bacteria modulate the specialised metabolome of Lithospermum officinale L.

Bacteria influence plant growth and development and therefore are attractive resources for applications in agriculture. However, little is known about the impact of these microorganisms on secondary metabolite (SM) production by medicinal plants. Here we assessed, for the first time, the effects of bacteria on the modulation of SM production in the medicinal plant Lithospermum officinale (Boraginaceae family) with a focus on the naphthoquinones alkannin/shikonin and their derivatives (A/Sd). The study was conducted in an in vitro cultivation system developed for that purpose, as well as in a greenhouse. Targeted and non-targeted metabolomics were performed, and expression of the gene PGT encoding for a key enzyme in the A/S biosynthesis pathway was evaluated with qPCR. Three strains, Chitinophaga sp. R-73072, Xanthomonas sp. R-73098 and Pseudomonas sp. R-71838 induced a significant increase of A/Sd in L. officinale in both systems, demonstrating the strength of our approach for screening A/Sd-inducing bacteria. The bacterial treatments altered other plant metabolites derived from the shikimate pathway as well. Our results demonstrate that bacteria influence the biosynthesis of A/Sd and interact with different metabolic pathways. This work highlights the potential of bacteria to increase the production of SM in medicinal plants and reveals new patterns in the metabolome regulation of L. officinale.

Metabolite Production in Alkanna tinctoria Links Plant Development with the Recruitment of Individual Members of Microbiome Thriving at the Root-Soil Interface.

Plants are naturally associated with diverse microbial communities, which play significant roles in plant performance, such as growth promotion or fending off pathogens. The roots of Alkanna tinctoria L. are rich in naphthoquinones, particularly the medicinally used enantiomers alkannin and shikonin and their derivatives. Former studies already have shown that microorganisms may modulate plant metabolism. To further investigate the potential interaction between A. tinctoria and associated microorganisms, we performed a greenhouse experiment in which A. tinctoria plants were grown in the presence of three distinct soil microbiomes. At four defined plant developmental stages, we made an in-depth assessment of bacterial and fungal root-associated microbiomes as well as all extracted primary and secondary metabolite content of root material. Our results showed that the plant developmental stage was the most important driver influencing the plant metabolite content, revealing peak contents of alkannin/shikonin derivatives at the fruiting stage. Plant root microbial diversity was influenced both by bulk soil origin and to a small extent by the developmental stage. The performed correlation analyses and cooccurrence networks on the measured metabolite content and the abundance of individual bacterial and fungal taxa suggested a dynamic and at times positive or negative relationship between root-associated microorganisms and root metabolism. In particular, the bacterial genera Labrys and Allorhizobium-Neorhizobium-Pararhizobium-Rhizobium as well as four species of the fungal genus Penicillium were found to be positively correlated with higher content of alkannins. IMPORTANCE Previous studies have shown that individual, isolated microorganisms may influence secondary metabolism of plants and induce or stimulate the production of medicinally relevant secondary metabolism. Here, we analyzed the microbiome-metabolome linkage of the medicinal plant Alkanna tinctoria, which is known to produce valuable compounds, particularly the naphthoquinones alkannin and shikonin and their derivatives. A detailed bacterial and fungal microbiome and metabolome analysis of A. tinctoria roots revealed that the plant developmental stage influenced root metabolite production, whereas soil inoculants from three different geographical origins in which plants were grown shaped root-associated microbiota. Metabolomes of plant roots of the same developmental stage across different soils were highly similar, pinpointing to plant maturity as the primary driver of secondary metabolite production. Correlation and network analyses identified bacterial and fungal taxa showing a positive relationship between root-associated microorganisms and root metabolism. In particular, the bacterial genera Allorhizobium-Neorhizobium-Pararhizobium-Rhizobium and Labrys as well as the fungal species of genus Penicillium were found to be positively correlated with higher content of alkannins.

Transcriptional dynamics of Chitinophaga sp. strain R-73072-mediated alkannin/shikonin biosynthesis in Lithospermum officinale.

Plants are colonized by a wide range of bacteria, several of which are known to confer benefits to their hosts such as enhancing plant growth and the biosynthesis of secondary metabolites (SMs). Recently, it has been shown that Chitinophaga sp. strain R-73072 enhances the production of alkannin/shikonin, SMs of pharmaceutical and ecological importance. However, the mechanisms by which this bacterial strain increases these SMs in plants are not yet understood. To gain insight into these mechanisms, we analyzed the molecular responses of Lithospermum officinale, an alkannin/shikonin producing member of Boraginaceae, to inoculation with R-73072 in a gnotobiotic system using comparative transcriptomics and targeted metabolite profiling of root samples. We found that R-73072 modulated the expression of 1,328 genes, of which the majority appeared to be involved in plant defense and SMs biosynthesis including alkannin/shikonin derivatives. Importantly, bacterial inoculation induced the expression of genes that predominately participate in jasmonate and ethylene biosynthesis and signaling, suggesting an important role of these phytohormones in R-73072-mediated alkannin/shikonin biosynthesis. A detached leaf bioassay further showed that R-73072 confers systemic protection against Botrytis cinerea. Finally, R-73072-mediated coregulation of genes involved in plant defense and the enhanced production of alkannin/shikonin esters further suggest that these SMs could be important components of the plant defense machinery in alkannin/shikonin producing species.

Clinical Effectiveness of Herbal Oral Care Products in Periodontitis Patients: A Systematic Review.

BACKGROUND: The use of herbal products in oral cavity has shown an increased popularity and potential benefits due to their additional anti-inflammatory and antioxidant properties as well as the lack of side effects related to their use. OBJECTIVE: To assess the clinical effectiveness of herbal dental products (mouthwash, dentifrice, gel) when compared to conventional products or placebo in periodontitis patients. MATERIAL AND METHODS: A systematic review with 22 studies was carried out using MEDLINE/Pubmed, EMBASE and Web of Science databases in addition to hand searches. Randomized and non-randomized clinical trials that evaluated the effect of any herbal dental product and compared it with conventional products or placebo in periodontitis patients and published up to March 2022, were screened. RESULTS: Herbal products used as adjuncts to scaling and root planing (SRP) or supragingival debridement (SPD) led to superior clinical outcomes than placebo or no adjuncts (8 studies). In conjunction with SRP, these products showed comparable outcomes with chlorhexidine (6 studies) or better (4 studies). When used as adjuncts to SPD, herbal oral care products demonstrated comparable outcomes with chlorhexidine and conventional products (4 studies). CONCLUSIONS: Within the limitations of this systematic review, herbal oral care products may play a key role in the management of periodontal disease. Further well-designed studies are needed to establish their efficacy.

Preparation and Evaluation of Siderol Amorphous Solid Dispersions: Selection of Suitable Matrix/Carrier.

The present study investigates the preparation of amorphous solid dispersions (ASD) for the ent-kaurane diterpenoid siderol (SDR). Initially, evaluation of the pure drug (isolated from Sideritis scardica) revealed that the API is a non-stable glass former, and hence the selection of a suitable ASD's matrix/carrier needs special attention. For this reason, four commonly used polymers and copolymers, namely poly(vinylpyrrolidone), copovidone, hydroxypropyl cellulose, and Soluplus® (SOL), were screened via film casting and crystal growth rate measurements. Amongst them, SOL showed the highest SDR's crystal growth rate reduction, and, since it was also miscible with the drug, it was selected for further testing. In this direction, SDR-SOL ASDs were successfully prepared via melt-quench cooling. These formulations showed full API amorphization, while good physical stability (i.e., a stable SDR amorphous dispersions) were obtained after storage for several months. Finally, evaluation of molecular interactions (with the aid of ATR-FTIR spectroscopy) showed strong H-bonds between SOL and SDR, while the use of molecular dynamics (MD) simulations unraveled the nature of these interactions. Therefore, based on the findings of the present work, SOL seems to be an appropriate matrix/carrier for the preparation of SDR ASDs, although further studies are needed in order to explore its full potentials.