Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 7 de 7
Filter
Add more filters










Database
Publication year range
1.
J Plast Reconstr Aesthet Surg ; 77: 21-30, 2023 02.
Article in English | MEDLINE | ID: mdl-36549120

ABSTRACT

INTRODUCTION: In the era of increasing popularity of the superficial circumflex iliac perforator (SCIP) flap, osteocutaneous variants of the flap have been described as well. Despite their benefits such as customizability and low donor site morbidity, these flaps have not yet gained broad acceptance. By reviewing our case series, we aim to promote the safe application of this promising new tool in osteoplastic reconstructions. PATIENTS AND METHODS: We performed a single-centre, retrospective chart review of all cases in which osteocutaneous SCIP-flaps were used. We describe our surgical technique and present the surgical, functional and aesthetic outcomes of the patients in our cohort. RESULTS: Since September 2019, we have used osteocutaneous SCIP flaps in six patients, five in the extremities and one for the head and neck region. The vascularised bone segment was measured on average 4.9 cm (range 4-7 cm) x 3 cm (range 1.5-4 cm) and was combined with a skin paddle of a mean length of 14.3 cm (range 8-20 cm) and width of 6.3 cm (range 5-8 cm). One flap underwent emergency revision due to venous congestion. All flaps survived and healed uneventfully. Long-term follow-up shows adequate bony integration and stable soft tissue coverage with good functional restoration and minimal donor site morbidity. CONCLUSION: The osteocutaneous SCIP flap provides a large and thin skin island and a "moderately sized" vascularised bone segment with minimal donor site morbidity and can be successfully used in selected cases of osteoplastic reconstruction.


Subject(s)
Perforator Flap , Plastic Surgery Procedures , Humans , Retrospective Studies , Iliac Artery/surgery , Perforator Flap/surgery , Ilium
2.
Bone Jt Open ; 3(10): 795-803, 2022 Oct.
Article in English | MEDLINE | ID: mdl-36222112

ABSTRACT

AIMS: Traditionally, total hip arthroplasty (THA) templating has been performed on anteroposterior (AP) pelvis radiographs. Recently, additional AP hip radiographs have been recommended for accurate measurement of the femoral offset (FO). To verify this claim, this study aimed to establish quantitative data of the measurement error of the FO in relation to leg position and X-ray source position using a newly developed geometric model and clinical data. METHODS: We analyzed the FOs measured on AP hip and pelvis radiographs in a prospective consecutive series of 55 patients undergoing unilateral primary THA for hip osteoarthritis. To determine sample size, a power analysis was performed. Patients' position and X-ray beam setting followed a standardized protocol to achieve reproducible projections. All images were calibrated with the KingMark calibration system. In addition, a geometric model was created to evaluate both the effects of leg position (rotation and abduction/adduction) and the effects of X-ray source position on FO measurement. RESULTS: The mean FOs measured on AP hip and pelvis radiographs were 38.0 mm (SD 6.4) and 36.6 mm (SD 6.3) (p < 0.001), respectively. Radiological view had a smaller effect on FO measurement than inaccurate leg positioning. The model showed a non-linear relationship between projected FO and femoral neck orientation; at 30° external neck rotation (with reference to the detector plane), a true FO of 40 mm was underestimated by up to 20% (7.8 mm). With a neutral to mild external neck rotation (≤ 15°), the underestimation was less than 7% (2.7 mm). The effect of abduction and adduction was negligible. CONCLUSION: For routine THA templating, an AP pelvis radiograph remains the gold standard. Only patients with femoral neck malrotation > 15° on the AP pelvis view, e.g. due to external rotation contracture, should receive further imaging. Options include an additional AP hip view with elevation of the entire affected hip to align the femoral neck more parallel to the detector, or a CT scan in more severe cases.Cite this article: Bone Jt Open 2022;3(10):795-803.

3.
Foot Ankle Spec ; 15(4): 330-337, 2022 Aug.
Article in English | MEDLINE | ID: mdl-32875824

ABSTRACT

BACKGROUND: Previous biomechanical studies simulating supination-external rotation (SER) IV injuries revealed different alterations in contact area and peak pressure. We investigated joint reaction forces and radiographic parameters in an unrestrained, more physiological setup. METHODS: Twelve lower leg specimens were destabilized stepwise by osteotomy of the fibula (SER II) and transection of the superficial (SER IVa) and the deep deltoid ligament (SER IVb) according to the Lauge-Hansen classification. Sensors in the ankle joint recorded tibio-talar pressure changes with axial loading at 700 N in neutral position, 10° of dorsiflexion, and 20° of plantarflexion. Radiographs were taken for each step. RESULTS: Three of 12 specimen collapsed during SER IVb. In the neutral position, the peak pressure and contact area changed insignificantly from 2.6 ± 0.5 mPa (baseline) to 3.0 ± 1.4 mPa (SER IVb) (P = .35) and from 810 ± 42 mm2 to 735 ± 27 mm2 (P = .08), respectively. The corresponding medial clear space (MCS) increased significantly from 2.5 ± 0.4 mm (baseline) to 3.9 ± 1.1 mm (SER IVb) (P = .028).The position of the ankle joint had a decisive effect on contact area (P = .00), center of force (P = .00) and MCS (P = .01). CONCLUSION: Simulated SER IVb injuries demonstrated radiological, but no biomechanical changes. This should be considered for surgical decision making based on MCS width on weightbearing radiographs. LEVELS OF EVIDENCE: Not applicable. Biomechanical study.


Subject(s)
Ankle Fractures , Ankle Joint , Ankle Fractures/diagnostic imaging , Ankle Fractures/surgery , Ankle Joint/diagnostic imaging , Ankle Joint/surgery , Biomechanical Phenomena , Cadaver , Humans , Ligaments, Articular/diagnostic imaging , Ligaments, Articular/injuries , Ligaments, Articular/surgery , Supination
4.
Foot Ankle Spec ; 14(6): 489-495, 2021 Dec.
Article in English | MEDLINE | ID: mdl-32484366

ABSTRACT

Background. Static weightbearing radiography can be used to assess stability in ankle fractures by measuring lateral talar shift (medial clear space; MCS). However, the correlation of a stable ankle joint under weightbearing load and the structural integrity of the deltoid ligament has not been shown. In this study, we assessed deltoid ligament integrity on magnetic resonance imaging (MRI) and correlated that with weightbearing and gravity stress test radiography. Methods. Thirty-four patients with supination external rotation II-IV (SER) fractures underwent MRI, weightbearing radiography, and gravity stress test. On MRI, the deep anterior and posterior tibiotalar deltoid, tibionavicular and tibiocalcaneal ligaments, as well as the syndesmosis were assessed as intact, partial rupture, or complete rupture. The MCS was measured as the distance between the lateral border of the medial malleolus and the medial border of the talus at the level of the talar dome on the mortise view. Results. Twenty-three patients suffered a deep anterior tibiotalar ligament rupture (16 partial; 7 complete) and 2 a deep posterior tibiotalar ligament tear (1 partial; 1 complete). For MCS on weightbearing radiography, no statistically significant differences were identified between any of the individual groups. With gravity stress radiography, only a complete tear of the tibiocalcaneal ligament showed a significantly higher MCS than a partial tear or intact tibiocalcaneal ligament (P < .005). No other ligament disruption showed a significant difference between the complete rupture versus intact or partial tear. Conclusion. Weightbearing radiography does not show much variation in terms of MCS even with ligamentous disruption and fibula fracture. The talus often centers itself underneath the tibia with weightbearing radiography.Levels of Evidence: Level III: Retrospective cohort study.


Subject(s)
Ankle Fractures , Ankle Fractures/diagnostic imaging , Ankle Joint/diagnostic imaging , Humans , Ligaments, Articular , Magnetic Resonance Imaging , Radiography , Retrospective Studies , Weight-Bearing
5.
Int Orthop ; 43(12): 2697-2705, 2019 12.
Article in English | MEDLINE | ID: mdl-30663000

ABSTRACT

PURPOSE: The acetabular reinforcement ring with a hook (ARRH) has been designed for acetabular total hip arthroplasty (THA) revision. Additionally, the ARRH offers several advantages when used as a primary implant especially in cases with altered acetabular morphology. The implant facilitates anatomic positioning by placing the hook around the teardrop and provides a homogenous base for cementing the polyethylene cup. Therefore, the implant has been widely used in primary total hip arthroplasty at our institution. The present study reports the long-term outcome of the ARRH after a minimum follow-up of 20 years. METHODS: Two hundred and ten patients with 240 primary THAs performed between April 1987 and December 1991 using the ARRH were retrospectively reviewed after a minimum follow-up of 20 years. Twenty-three of 240 hips were lost to follow-up, 110 patients with 124 THAs had deceased without having a revision surgery performed. This left 93 hips for final evaluation. Of those, 75 hips were assessed clinically and radiographically after a mean follow-up of 23.1 years (range 21.1-26.1 years). In 18 cases, clinical and radiographic assessment was omitted because implant revision had been performed prior to the follow-up investigation. The primary endpoint was defined as revision for aseptic loosening. RESULTS: Out of the 93 hips available for final evaluation, 14 hips were revised for aseptic loosening; another four were revised for other reasons (deep infection n = 2, recurrent dislocation n = 2). The survival probability of the cup was 0.96 (95% confidence interval 0.93-0.99) after 20 years with aseptic loosening as endpoint. Radiographic analysis of the surviving 75 hips showed at least one sign of radiographic loosening in 24 hips. The mean Merle d'Aubigne score increased from 8 points pre-operatively to 15 points at final follow-up (7.5 ± 1.8 vs 15.0 ± 2.3, p < 0.001). The mean HHS was 85 ± 14 at final follow-up. Radiographic loosening did not correlate with the clinical outcome. CONCLUSIONS: The long-term results of the ARRH in primary THA are comparable to results with standard cemented cups and modern cementless cups. We believe that the ARRH is a versatile implant for primary THA, especially in cases with limited acetabular coverage and altered acetabular bone stock where the ARRH provides sufficient structural support for a cemented cup.


Subject(s)
Acetabulum/surgery , Adult , Aged , Aged, 80 and over , Arthroplasty, Replacement, Hip/methods , Female , Follow-Up Studies , Hip Prosthesis , Humans , Male , Middle Aged , Reoperation , Retrospective Studies , Treatment Outcome
6.
Praxis (Bern 1994) ; 103(24): 1439-46, 2014 Nov 26.
Article in German | MEDLINE | ID: mdl-25446683

ABSTRACT

Total hip replacement is a common and succesful treatment of the osteoarthritis of the hip. According to the demographical trends in Switzerland in the coming decades, there will be a significant increase in the demand for total hip replacement surgery. The 20-year survival of a total hip prosthesis is approximately 85%. New prosthesis designs aim to improve the hip biomechanics, sacrifice less bone stock and facilitate "minimal-invasive"' approaches to the hip joint. Severe complications in total hip replacement comprise dislocation, aseptic loosening, infection, periprosthetic fracture and limping. The painful total hip replacement requires thourough and systematic work up of extrinsic and intrinsic causes. A referral to the orthopaedic specialist should be considered early.


L'arthroplastie totale de hanche est un traitement fréquent et efficace de l'arthrose de hanche symptomatique. Sur la base de l'évolution démographique ayant cours en Suisse il faut s'attendre à une nette augmentation du besoin d'implantation de prothèses de hanche durant les années à venir. Actuellement, 85% des prothèses de hanche ont une survie de 20 ans. De nouveaux modèles de prothèse essaient d'optimiser la biomécanique de l'articulation prothétique, de minimiser la perte osseuse, et de simplifier l'utilisation des voies d'abords 'mini-invasives'. Les complications sévères de l'arthroplastie totale de hanche sont la luxation et l'infection de la prothèse, et les fractures périprothétiques. Si des douleurs de hanche se développent après une arthroplastie totale de hanche il est nécessaire d'effectuer un examen systématique et minutieux. Ainsi, dans un tel cas, il est recommandé de recourir rapidement à un spécialiste.


Subject(s)
Arthroplasty, Replacement, Hip/rehabilitation , Osteoarthritis, Hip/rehabilitation , Postoperative Complications/diagnosis , Prosthesis Failure , Diagnosis, Differential , Hip Joint/pathology , Hip Joint/surgery , Humans , Magnetic Resonance Imaging , Postoperative Complications/surgery , Prosthesis Design , Reoperation
7.
J Orthop ; 11(4): 192-6, 2014 Dec.
Article in English | MEDLINE | ID: mdl-25561756

ABSTRACT

We present two cases of high tibial osteotomies performed at our institution. Both cases were complicated with the immediate postoperative occurrence of an ischaemic syndrome of the lower leg. Urgent diagnostics revealed a complete rupture of the popliteal artery that required re-operation and a vascular repair. Although neurovascular complications during high tibial osteotomies are rare the awareness of this potentially catastrophic complication should be present when performing this common procedure. All precautions to minimize the harm to the neurovascular bundle should be put into practice. A summary of the surgical precautions is presented and discussed in this paper.

SELECTION OF CITATIONS
SEARCH DETAIL
...