Revealing the ESIPT process in benzoxazole fluorophores within polymeric matrices through theory and experiment.

The impact of the polymeric matrix on the photophysical characteristics of monomeric dyes responsive to excited-state intramolecular proton transfer (ESIPT) was investigated through UV-Vis absorption as well as steady-state and time-resolved emission spectroscopies. For this purpose, two benzoxazole monomers (M1 and M2) with acryloyl groups at different positions in their molecular structures were employed to facilitate covalent bonding within a styrene chain. Our findings reveal significant variations in their excited-state properties due to the proximity of the acryloyl groups, which affects the energy barrier of the ESIPT reaction, the emission wavelength, and the balance between the normal and tautomeric forms. The experimental results were corroborated through theoretical investigations at the DFT/TDDFT level, specifically using the B3LYP-D3/def2-TZVP methodology. Three notable observations emerged: donor/acceptor groups at the meta/para positions induced electron distribution changes, causing red-shifted emission for M2; in the polymer film, particularly in PM1, intramolecular hydrogen bond deactivation favored N* emission over T* emission; and the zwitterionic character of the T* species. This study underscores the advantages of functionalization in polymers, which can lead to colorless films and prevalent N* or T* emission, and contributes valuable insights into molecular design strategies for tailoring the photophysical properties of polymeric materials.

Organosulfur and Organoselenium Functionalized Benzimidazo[1,2-a]quinolines: From Experimental and Theoretical Photophysics to All-Solution-Processed OLEDs.

In this study, we present the synthesis of benzimidazo[1,2-a] quinoline-based heterocycles bearing organosulfur and organoselenium moieties through transition-metal-free cascade reactions involving a sequential intermolecular aromatic nucleophilic substitution (SNAr). Both sulfur and selenium derivatives presented absorption maxima located around 355 nm related to spin and symmetry allowing electronic 1π-π* transitions, and fluorescence emission at the violet-blue region (~440 nm) with relatively large Stokes shift. The fluorescence quantum yields were slightly influenced by the chalcogen, with the sulfur derivatives presenting higher values than the selenium analogs. In this sense, the quantum yields for selenium derivatives can probably be affected by the intersystem crossing or even the photoinduced electron transfer process (PET). The compounds were successfully applied in all-solution-processed organic light-emitting diodes (OLEDs), where poly(9-vinylcarbazole) was employed as a dispersive matrix generating single-layer device cells. The obtained electroluminescence spectra are a sum of benzimidazo[1,2-a]quinolines and PVK singlet and/or triplet emissive states, according to their respective energy band gaps. The best diode rendered a luminance of 25.4 cd⋅m-2 with CIE (0.17, 0.14) and current efficiency of 20.2 mcd⋅A-1, a fivefold improvement in comparison to the PVK device that was explained by a 50-fold increase of charge-carriers electrical mobility.

All-Solution Processed Single-Layer WOLEDs Using [Pt(salicylidenes)] as Guests in a PFO Matrix.

Herein, we report the synthesis and characterization of two Pt(II) coordination compounds, the new platinum(II)[N,N'-bis(salicylidene)-3,4-diaminobenzophenone)] ([Pt(sal-3,4-ben)]) and the already well-known platinum(II)[N,N'-bis(salicylidene)-o-phenylenediamine] ([Pt(salophen)]), along with their application as guests in a poly [9,9-dioctylfluorenyl-2,7-diyl] (PFO) conjugated polymer in all-solution processed single-layer white organic light-emitting diodes. Completely different performances were achieved: 2.2% and 15.3% of external quantum efficiencies; 2.8 cd A-1 and 12.1 cd A-1 of current efficiencies; and 3103 cd m-2 and 6224 cd m-2 of luminance for the [Pt(salophen)] and [Pt(sal-3,4-ben)] complexes, respectively. The Commission Internationale de l'Eclairage (CIE 1931) chromaticity color coordinates are (0.33, 0.33) for both 0.1% mol/mol Pt(II):PFO composites at between approximately 3.2 and 8 V. The optoelectronic properties of doped and neat PFO films have been investigated, using steady-state and time-resolved photoluminescence. Theoretical calculations at the level of relativistic density functional theory explained these results, based on the presence of the Pt(II) central ion's phosphorescence emission, considering spin-orbit coupling relationships. The overall results are explained, taking into account the active layer morphological properties, along with the device's electric balance and the emitter's efficiencies, according to deep-trap space-charge models. Considering the very simple structure of the device and the ease of synthesis of such compounds, the developed framework can offer a good trade-off for solution-deposited white organic light-emitting diodes (WOLEDs), with further applications in the field of lighting and signage.

Predictive variables for feelings of sadness and depression while working remotely in Brazil during the COVID-19 pandemic.

BACKGROUND: Remote work was evidenced in the pandemic and studies in this area increased. Most studies focus on professionals of companies or professors/students in the academic environment. At the same time, non-academic staff, that provide all the support required for the core activities of the institutions (research/teaching/extension activities) have been neglected. OBJECTIVE: This article aims to exploratory analyse which variables (interruptions when working remotely (1), health concerns (2) and fear of contracting coronavirus (3), anxiety and concern about professional career (4), frustration to have cancelled plans and missed opportunities (5) and gender (6)) can impact feelings of sadness and depression experienced by non-academic staff of a university working remotely. METHODS: Using a database on behaviour and feelings of non-academic staff from a Brazilian university working remotely during the COVID-19 pandemic, a binary logistic regression model was structured. In an exploratory manner, six independent variables (presented in the previous item) were analysed in terms of their ability to predict the dependent variable (feelings of sadness and depression). RESULTS: The results presented the prediction power of the independent variables for the dependent variable. The variables regarding concern with their health, increased anxiety and concern about their career presented Odds Ratios of 3.6 (1.4-8.5 -95% C.I.) and 3.3 (2.2-5.0 -95% C.I.), respectively, standing out from the other variables. CONCLUSIONS: These results focus on staff at one institution, but they can contribute to better understand feelings and behaviours experienced by professionals working remotely and provide information for debates on the field of COVID-19-related changes of work.

Enhancing the phosphorescence decay pathway of Cu(I) emitters - the role of copper-iodide moiety.

Speeding up the phosphorescence channel in luminescent copper(I) complexes has been extremely challenging due to the copper atoms relatively low spin-orbit coupling constant compared to heavier metals such as iridium. Here, we report the synthesis and characterization of three mononuclear copper(I) complexes with diimines, triphenylphosphine, and iodide ligands to evaluate the effect of the copper-iodide (Cu-I) moiety into the phosphorescence decay pathway. Temperature-dependent photophysical studies revealed combined thermally activated delayed fluorescence and phosphorescence emission, with a phosphorescence decay rate of the order of 104 s-1. Density functional theory calculations indicate very high spin-orbit coupling matrix elements between the low-lying states of these complexes. Compared to the classical [Cu(phen)(POP)]+, our results demonstrate that Cu-I is a versatile moiety to speed up the phosphorescence decay pathway in about one order of magnitude, and it can be prepared by a simplified synthetic route with few synthetic steps. Furthermore, the SOC matrix elements and the phosphorescence decay rates of these complexes are comparable to those of extensively applied coordination complexes based on heavier metals, making them a promising alternative as active layers of organic light-emitting diodes.

A new interpretation of the mechanism of wormlike micelle formation involving a cationic surfactant and salicylate.

HYPOTHESIS: When tetradecyltrimethylammonium bromide, TTAB, is added to aqueous solution of sodium salicylate, NaSal, the threading of the aromatic anion into the micellar palisade leads to the formation of wormlike micelles. Based on the calorimetric titration of NaSal with TTAB, and on the lifetime of fluorescence of salicylate, we propose that the aggregation of the two components directly leads to the formation of wormlike micelles, without any pre-aggregation. EXPERIMENTS: By using an isothermal titration calorimeter, aliquots of TTAB were added to a dilute solution of NaSal. The energy involved in each addition was then integrated and the variation of enthalpy was determined. In the same range of concentrations and molar ratios, the surface tensiometry and time-resolved emission spectroscopy experiments were performed. FINDINGS: A very characteristic calorimetric signal associated with wormlike micelle formation was obtained, being the enthalpy variation of this process, ΔWLMH2980 < 0. When 1.2 mmol L-1 of NaSal is titrated with 11.0 mmol L-1 of TTAB at 298.15 K, ΔfH2980 = -10.31 kJ per mol of injectant. By adding TTAB to NaSal solution, two fluorescence lifetimes of salicylate were observed solely after wormlike micelle being formed. The correspondent lifetime values of 4.0 ns and 7.2 ns are respectively associated with the free and associated species of salicylate. The new results demonstrated that wormlike micelles are the first aggregate formed when TTAB is added to salicylate. This aspect is relevant for understanding the mechanism of wormlike micelles formation.

White-light generation from all-solution-processed OLEDs using a benzothiazole-salophen derivative reactive to the ESIPT process.

A salicylidene derivative, N,N'-bis(salicylidene)-(2-(3',4'-diaminophenyl)benzothiazole) (BTS), reactive in the Excited State Intramolecular Proton Transfer (ESIPT) process, was synthesized and its photophysical properties were evaluated, presenting an emission covering the entire range of the visible spectrum. Due to its broad emission band, BTS was successfully tested as an active layer in solution-processed organic light-emitting diodes with white-light emission. These diodes were prepared using solution-based protocols with the dye solubilized in a poly(9-vinylcarbazole) matrix. Different guest : host (polymer : BTS) molar ratios were used to optimize the diode performance. The optimized architecture rendered the best so far all-solution-processed ESIPT OLED with a luminance of 34 cd m-2 at 13.5 V with CIE coordinates 0.31, 0.40.

Photoacidity as a tool to rationalize excited state intramolecular proton transfer reactivity in flavonols.

This work presents the determination of acidic strengths at the electronic ground and excited states (pKa and ) of three flavonol derivatives using electronic absorption and fluorescence emission spectroscopy. The differences of the pKa and values were successfully correlated with the molecular structures according to the substitution pattern at the flavonol structure (hydrogen, diethylamino or fluoro moieties). In order to obtain more information about the observed photoacidity of these superacids, geometry optimizations and excitation energy calculations were performed at the CAM-B3LYP/6-311++G(d,p) level for their neutral, protonated and deprotonated species.

Photodynamic antimicrobial effects of bis-indole alkaloid indigo from Indigofera truxillensis Kunth (Leguminosae).

Multidrug-resistant microbial infections represent an exponentially growing problem affecting communities worldwide. Photodynamic therapy is a promising treatment based on the combination of light, oxygen, and a photosensitizer that leads to reactive oxygen species production, such as superoxide (type I mechanism) and singlet oxygen (type II mechanism) that cause massive oxidative damage and consequently the host cell death. Indigofera genus has gained considerable interest due its mutagenic, cytotoxic, and genotoxic activity. Therefore, this study was undertaken to investigate the effect of crude extracts, alkaloidal fraction, and isolated substance derived from Indigofera truxillensis in photodynamic antimicrobial chemotherapy on the viability of bacteria and yeast and evaluation of mechanisms involved. Our results showed that all samples resulted in microbial photoactivation in subinhibitory concentration, with indigo alkaloid presenting a predominant photodynamic action through type I mechanism. The use of CaCl2 and MgCl2 as cell permeabilizing additives also increased gram-negative bacteria susceptibility to indigo.

Tuning emission colors from blue to green in polymeric light-emitting diodes fabricated using polyfluorene blends.

The photo- and electroluminescent properties of single-layer two-component blends composed of one blue emitter polymer and one green emitter polymer were studied. The blue emitter, poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-co-(9,9-di-{5'-pentanyl}-fluorenyl-2,7-diyl)] (PFOFPen), was used as the matrix, and the green emitter, poly[(9,9-dihexylfluorenyl-2,7-diyl)-alt-co-(bithiophene)] (F6T2), was used as the guest. The F6T2 content in the blends varied from 0.0075 wt % to 2.4 wt %. Remarkable differences were observed between the electroluminescent (EL) and photoluminescent (PL) spectra of these blends, which indicated that the mechanism for excited-state generation in the former process had a higher efficiency in the aggregated phase than in the nonaggregated phase. Blending these two polymers gradually tuned the emission color from blue (PFOFPen and blends with <0.75 wt % F6T2) to green (F6T2 and blends with >0.75 wt % F6T2). The photophysical processes involved in both EL and PL emission are also discussed.

Energy transfer from poly(vinyl carbazole) to a fluorene-vinylene copolymer in solution and in the solid state.

This article reports a comparative study of the energy transfer processes in solution and the solid state from poly(vinyl carbazole; the donor) to dimethylphenyl-terminated poly[(9,9-dioctylfluorenyl-2,7-divinylene-fluorene)-co-alt-{2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylene}] (the acceptor). The results in solutions suggest that a decrease of the donor emission intensity with an increasing acceptor concentration is more closely related to the trivial energy transfer process, indicating that the donor and acceptor chains are not in close contact during the lifetime of the donor excited state. This conclusion was reached using the amplitude-averaged lifetime of the donor, which is practically independent of the acceptor concentration. In the solid state, the polymer blends showed a decrease in the donor emission with an increasing acceptor concentration, and a decrease in the donor lifetime was also observed. Thus, in the solid state, changes in morphology interfere with the nonradiative resonant energy transfer process, but influence on the trivial process cannot be completely neglected. The lifetime does not follow a continuous decrease with the PFO-MEHPV concentration like the emission intensity does. The changes in the lifetime values occur over the same concentration range as do the changes of morphology, as shown by the scanning electron micrographs.