Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 69
Filter
Add more filters










Publication year range
1.
Molecules ; 28(13)2023 Jun 27.
Article in English | MEDLINE | ID: mdl-37446679

ABSTRACT

2,4-Dihydroxybenzophenone is the most widely used molecule in the benzophenone group of UV absorbers. It is known that the UV absorption ability is dependent on the substituents. Numerous studies have shown that the strength of intramolecular hydrogen bonds is the main factor affecting this type of UV absorber. However, the effect of substituents on the formation and nature of the hydrogen bonds has not been well studied. In this work, the effect of the type of substituent and the substitution position on the absorption intensity of 2,4-dihydroxybenzophenone molecules is verified both experimentally and theoretically. The effect of substituents on the intramolecular hydrogen bonding of 2,4-dihydroxybenzophenone was investigated by DFT calculations. The results indicate that the addition of different substituents leads to various changes in the strength of the hydrogen bonding in 2,4-dihydroxybenzophenone. On the X-substitution site or the Y-substitution site, halogen groups and electron-absorbing groups such as -CN and -NO2 increase the strength of the hydrogen bond, while electron-giving groups such as -N(CH3)2 and -OCH3 decrease the strength of the bond. For the same substituent, the one at the Y site has a higher effect on hydrogen bonding than that at the X site. By NBO analysis, it was found that the substituents would cause charge redistribution of the individual atoms of 2,4-dihydroxybenzophenones, thus affecting the formation and strength of the hydrogen bonds. Moreover, when the substituent is at the Y substitution site, the oxygen atom of the carbonyl group is less able to absorb electrons and more charge is attracted to the oxygen atom of the hydroxyl group, resulting in a larger charge difference between the two oxygen atoms and an increase of bond energy. Finally, a multiple linear regression analysis of the NPA charge number of the atoms involved in the formation of the hydrogen-bonded chelated six-membered ring was performed with the energy of the hydrogen bond and the percentage of influencing factors estimated, which were found to jointly affect the strength of hydrogen bonding. The aim of this study is to provide theoretical guidance for the design of benzophenone-based UV absorbers that absorb UV light of specific wavelength bands.


Subject(s)
Benzophenones , Ultraviolet Rays , Hydrogen Bonding , Oxygen
2.
Macromol Rapid Commun ; 44(8): e2300012, 2023 Apr.
Article in English | MEDLINE | ID: mdl-36854889

ABSTRACT

Heterogeneous photocatalysis have been deemed as a versatile and colorful platform for exploring efficient transformation systems. Henceforth, the design of photocatalysts underpins a wide range of research interests. By virtue of synthetic versatility, stability, non-toxicity, purely organic properties, tunable semiconductive structures, and remarkable visible-light absorbance, conjugated microporous polymers (CMPs) have emerged as an attractive new class of semiconductor materials that show great potential for tackling important energy and environmental challenges. Over the past decade, immense efforts have been devoted toward the construction of CMPs-based photocatalysts for versatile photocatalytic transformations. This review aims to summarize the latest representative advances in the field of carbazolic CMPs, focusing on various design strategies for the construction of tailor-made skeletons that have direct impact on their charge dynamics and thus photocatalytic performances, especially on their specific photocatalytic efficiency for organic transformations. Scrutinizing the photocatalytic features and elucidating the related design principles, it is fully described how structure modification of polycarbazoles could have an effect on optical properties, and thus on photocatalytic performance. Furthermore, the bottlenecks that need to be addressed, and the future research directions of CMPs are identified in the area of photocatalysis.


Subject(s)
Light , Polymers , Semiconductors
3.
Molecules ; 27(23)2022 Nov 24.
Article in English | MEDLINE | ID: mdl-36500263

ABSTRACT

Substituent effects on the ultraviolet absorption properties of 2,4-dihydroxy dibenzophenone were investigated experimentally. Nine compounds of 2,4-dihydroxy dibenzophenone with different substituents were prepared by a solvent-free reaction of benzoyl chloride. The maximum absorption wavelength (λmax) of these samples was measured, and their UV resistance properties in cotton fabric as well as in polyester were determined. The results show that the λmax is dependent on the substituents at the benzylidene ring, and both electron donating substituents and electron withdrawing substituents cause a bathochromic shift. The UV resistance of fabric increases with the increase in compound concentration. The dyeing rate of each compound on polyester was higher than that of cotton. On cotton fabric, the dyeing rate of 2,4-dihydroxybenzophenone was the highest, 77.8%. On polyester, that of 2,4-dihydroxy-4'-ethyl dibenzophenone was the highest, 84.1%. The study provides new insights into the effect of substituents on the properties of 2,4-dihydroxy dibenzophenone that are related to the whitening of cotton and polyester materials.


Subject(s)
Coloring Agents , Textiles , Solvents , Electrons , Polyesters
4.
Langmuir ; 38(47): 14439-14450, 2022 Nov 29.
Article in English | MEDLINE | ID: mdl-36378533

ABSTRACT

A four-stage oscillating feedback millireactor with splitters (S-OFM) was designed to improve the mixing performance based on chaotic advection. Three-dimensional CFD simulations were used to investigate its flow characteristics and mixing performance, and the generation mechanisms of secondary flows were examined. The results show that the mixing index (MIcup) increased with the increase in the Reynolds number (Re), and MIcup could reach 99.8% at Re = 663. Poincaré mapping and Kolmogorov entropy were adopted to characterize the chaotic advection intensity, which indicates that there is a intensity increase with the increase in Re. In addition, the results of Villermaux-Dushman experiments demonstrate that S-OFM performs excellently, and the mixing time could reach 1.04 ms at Re = 2764. Finally, S-OFM was successfully used to synthesize CdS nanoparticles with cubic hexagonal phase junctions. At a flow rate of 180 mL/min, the average particle size was 10.5 nm and the particle size distribution was narrow (with a coefficient of variation of 0.14).

5.
Article in English | MEDLINE | ID: mdl-35549069

ABSTRACT

The photoelectrocatalytic (PEC) oxidation of glycerol into highly value-added products is attractive, but it is extremely challenging to limit the oxidation products to the valuable C3 chemicals. The hole concentration and surface atomic arrangement of a photoanode can be modulated by controlling facet exposure, thus tuning the activity and selectivity. Herein, we report for the first time the formation of a WO3 photoanode with predominant exposure of {202} facets by a secondary hydrothermal method. The photoanode exhibits superior PEC glycerol conversion efficiency, giving an 80% selectivity to glyceraldehyde with a production rate of 462 mmol h-1 m-2. Also, the faraday efficiency for the C3 product reaches 98.6%. We made comparison between the {202} facets and the commonly studied {200} facets using experimental and theoretical methods. It is disclosed that the former enhances not only the adsorption and activation of glycerol via the terminal hydroxyl groups but also the desorption of glyceraldehyde.

6.
Phys Chem Chem Phys ; 23(33): 17894-17903, 2021 Sep 07.
Article in English | MEDLINE | ID: mdl-34378575

ABSTRACT

Bismuth oxyhalides (BiOX), as a typical photocatalytic material, have attracted much attention due to their unique layered structure, non-toxicity and excellent stability. However, the photocatalytic performance of BiOX is limited by their weak light absorption ability and rapid recombination of photo-generated carriers. In the present work, first-principles calculations have been performed to comprehensively explore the structural, electronic and optical properties of black phosphorus (BP)/BiOX (X = Cl, Br, I) heterostructures, revealing the inherent reasons for their enhanced photocatalytic performance. By combining band structures and work function analysis, the migration paths of photo-generated electrons and holes are obtained, proving a direct Z-scheme photocatalytic mechanism in BP/BiOX heterostructures. Moreover, the BP/BiOX heterostructures have decent band edge positions, which are suitable for photocatalytic overall water splitting. Compared with single BiOX, the light absorption performance of BP/BiOX heterostructures is significantly improved, in which BP/BiOI exhibits the highest optical absorption coefficient among the BP/BiOX heterostructures. Meanwhile, the better carrier migration performance of the BP/BiOX heterostructures is attributed to the reduction in effective mass. The present work offers theoretical insight into the application of BP/BiOX heterostructures as prominent photocatalysts for water splitting.

7.
Polymers (Basel) ; 13(15)2021 Jul 31.
Article in English | MEDLINE | ID: mdl-34372142

ABSTRACT

Owing to the unique optophysical properties of nanomaterials and their self-calibration characteristics, nanomaterial-based (e.g., polymer dots (Pdots) quantum dots (QDs), silicon nanorods (SiNRs), and gold nanoparticle (AuNPs), etc.) ratiometric fluorescent sensors play an essential role in numerous biosensing and cell imaging applications. The dual-emission ratiometric fluorescence technique has the function of effective internal referencing, thereby avoiding the influence of various analyte-independent confounding factors. The sensitivity and precision of the detection can therefore be greatly improved. In this review, the recent progress in nanomaterial-based dual-emission ratiometric fluorescent biosensors is systematically summarized. First, we introduce two general design approaches for dual-emission ratiometric fluorescent sensors, involving ratiometric fluorescence with changes of one response signal and two reversible signals. Then, some recent typical examples of nanomaterial-based dual-emission ratiometric fluorescent biosensors are illustrated in detail. Finally, probable challenges and future outlooks for dual-emission ratiometric fluorescent nanosensors for biosensing and cell imaging are rationally discussed.

8.
ACS Appl Mater Interfaces ; 13(29): 34308-34319, 2021 Jul 28.
Article in English | MEDLINE | ID: mdl-34279892

ABSTRACT

This study highlights the facet structure control of regular NixCo3-xO4 nanoplates and interfacial modulation through elemental doping and morphologically fitted assembly of Ti3C2Tx nanosheets for high performances in OER/HER and overall water splitting. Over the resulting Ni0.09Co2.91O4/Ti3C2Tx-HT in a solution of 1 M KOH, the OER and HER overpotentials of 262 and 210 mV, respectively, are achievable at a current density of 10 mA cm-2. In the case of the overall water splitting by using Ni0.09Co2.91O4/Ti3C2Tx-HT as anode and cathode catalysts, only a potential of 1.66 V is needed to obtain a current density of 10 mA cm-2, and the catalysts can stand for a period of 70 h, remarkably outperforming the RuO2-Pt/C-based catalyst and benefiting from the intensive association and interfacial function between the Ti3C2Tx and NixCo3-xO4 nanosheets. Interestingly, a surface reconstruction from the (112) to (111) facet structure occurred upon the fine-tuned Ni doping of regular NixCo3-xO4 hexagonal nanoplates and led to a highly active catalyst surface. At x = 0.09, the amount of Ni3+ becomes the highest, which is favorable for the generation of the critical OH intermediates on NixCo3-xO4/Ti3C2Tx-HT. The current study documented the significance of the well-controlled interfacial assembly of transition-metal oxide/MXenes as an effective electrocatalyst in the OER/HER and overall water splitting processes and provided the insights into the structure-performance correlation over such kinds of precious metal-free catalysts.

9.
Chem Sci ; 12(20): 7125-7137, 2021 Apr 07.
Article in English | MEDLINE | ID: mdl-34123340

ABSTRACT

The desire for a carbon-free society and the continuously increasing demand for clean energy make it valuable to exploit green ammonia (NH3) synthesis that proceeds via the electrolysis driven Haber-Bosch (eHB) process. The key for successful operation is to develop advanced catalysts that can operate under mild conditions with efficacy. The main bottleneck of NH3 synthesis under mild conditions is the known scaling relation in which the feasibility of N2 dissociative adsorption of a catalyst is inversely related to that of the desorption of surface N-containing intermediate species, which leads to the dilemma that NH3 synthesis could not be catalyzed effectively under mild conditions. The present work offers a new strategy via introducing atomically dispersed Ru onto a single Co atom coordinated with pyrrolic N, which forms RuCo dual single-atom active sites. In this system the d-band centers of Ru and Co were both regulated to decouple the scaling relation. Detailed experimental and theoretical investigations demonstrate that the d-bands of Ru and Co both become narrow, and there is a significant overlapping of t2g and eg orbitals as well as the formation of a nearly uniform Co 3d ligand field, making the electronic structure of the Co atom resemble that of a "free-atom". The "free-Co-atom" acts as a bridge to facilitate electron transfer from pyrrolic N to surface Ru single atoms, which enables the Ru atom to donate electrons to the antibonding π* orbitals of N2, thus resulting in promoted N2 adsorption and activation. Meanwhile, H2 adsorbs dissociatively on the Co center to form a hydride, which can transfer to the Ru site to cause the hydrogenation of the activated N2 to generate N2H x (x = 1-4) intermediates. The narrow d-band centers of this RuCo catalyst facilitate desorption of surface *NH3 intermediates even at 50 °C. The cooperativity of the RuCo system decouples the sites for the activation of N2 from those for the desorption of *NH3 and *N2H x intermediates, giving rise to a favorable pathway for efficient NH3 synthesis under mild conditions.

10.
Phys Chem Chem Phys ; 23(21): 12439-12448, 2021 Jun 02.
Article in English | MEDLINE | ID: mdl-34031670

ABSTRACT

In recent years, two-dimensional (2D) lead-free double perovskites have been attracting much attention because of their unique performance in photovoltaic solar cells and photocatalysis. Nonetheless, how thickness affects the photoelectric properties of lead-free double perovskite remains unclear. In this work, by means of density functional theory (DFT) with a spin orbit coupling (SOC) effect, we have investigated the electronic and optical properties systemically, including band structures, carrier mobility, optical absorption spectra, exciton-binding energies, band edges alignment and molecule adsorption performance of Cs2AgBiBr6 with different thicknesses. The calculated results revealed the thickness-induced band gap and optical performance for Cs2AgBiBr6. It shows a low band gap and outstanding optical absorption of visible and ultraviolet light. When the thickness is reduced to a monolayer, Cs2AgBiBr6 moves from an indirect band gap to a direct band gap. Moreover, the carrier mobility of Cs2AgBiBr6 is excellent and the exciton-binding energy increases with the decreased thickness. Importantly, an analysis of molecule adsorption and band edge alignment indicates that Cs2AgBiBr6 is prone to H2O adsorption and H2 desorption theoretically, which is conducive to the photocatalytic water splitting for hydrogen generation and other photovatalytic reactions. Our work suggests that Cs2AgBiBr6 is a potential candidate as a solar cell or a photocatalyst, and we provide theoretical explorations into reducing the layers of lead-free double perovskite materials to 2D atomic thickness for a better photocatalytic application, which can serve as guidelines for the design of excellent photocatalysts.

11.
Angew Chem Int Ed Engl ; 60(3): 1433-1440, 2021 Jan 18.
Article in English | MEDLINE | ID: mdl-33006403

ABSTRACT

The introduction of oxygen vacancies (Ov) has been regarded as an effective method to enhance the catalytic performance of photoanodes in oxygen evolution reaction (OER). However, their stability under highly oxidizing environment is questionable but was rarely studied. Herein, NiFe-metal-organic framework (NiFe-MOFs) was conformally coated on oxygen-vacancy-rich BiVO4 (Ov-BiVO4 ) as the protective layer and cocatalyst, forming a core-shell structure with caffeic acid as bridging agent. The as-synthesized Ov-BiVO4 @NiFe-MOFs exhibits enhanced stability and a remarkable photocurrent density of 5.3±0.15 mA cm-2 at 1.23 V (vs. RHE). The reduced coordination number of Ni(Fe)-O and elevated valence state of Ni(Fe) in NiFe-MOFs layer greatly bolster OER, and the shifting of oxygen evolution sites from Ov-BiVO4 to NiFe-MOFs promotes Ov stabilization. Ovs can be effectively preserved by the coating of a thin NiFe-MOFs layer, leading to a photoanode of enhanced photocurrent and stability.

12.
Small ; 16(42): e2003904, 2020 Oct.
Article in English | MEDLINE | ID: mdl-32996272

ABSTRACT

Iron-based catalysts have been widely studied for the oxidation of H2 S into elemental S. However, the prevention of iron sites from deactivation remains a big challenge. Herein, a facile copolymerization strategy is proposed for the construction of isolated Fe sites confined in polymeric carbon nitride (CN) (Fe-CNNχ). The as-prepared Fe-CNNχ catalysts possess unique 2D structure as well as electronic property, resulting in enlarged exposure of active sites and enhancement of redox performance. Combining systematic characterizations with density functional theory calculation, it is disclosed that the isolated Fe atoms prefer to occupy four-coordinate doping configurations (Fe-N4 ). Such Fe-N4 centers favor the adsorption and activation of O2 and H2 S. As a consequence, Fe-CNNχ exhibit excellent catalytic activity for the catalytic oxidation of H2 S to S. More importantly, the Fe-CNNχ catalysts are resistant to water and sulfur poisoning, exhibiting outstanding catalytic stability (over 270 h of continuous operation), better than most of the reported catalysts.

13.
J Org Chem ; 85(19): 12430-12443, 2020 Oct 02.
Article in English | MEDLINE | ID: mdl-32929959

ABSTRACT

We disclose a novel method for the synthesis of fluorescent N,N'-chelate organoboron compounds in high efficiency by treatment of aminoquinolates with NaBAr4/R'COOH in the presence of an iodine catalyst. These compounds display high air and thermal stability. A possible catalytic mechanism based on the results of control experiments has been proposed. Fluorescence quantum yield of 3b is up to 0.79 in dichloromethane.

14.
ACS Omega ; 5(30): 19304-19311, 2020 Aug 04.
Article in English | MEDLINE | ID: mdl-32775934

ABSTRACT

The C-X bonds of organic compounds between group X and a saturated or unsaturated carbon atom differ in bond energy. To identify the causes of variation is of great significance in terms of bond nature understanding and bond energy estimation. In this paper, the electronegativity χ[X] of group X was calculated by the "valence electron equalized electronegativity" method. Then, χ[X] and the electronic effect constant of the substituent were taken as variables to establish equations for quantitative correlation between C(sp3)-X and C(sp2)-X for the calculation of C-X bond energies. The aim is make comparison between substituted methane, Me-X, and substituted benzene, Ph-X, as well as that between Me-X and substituted ethylene, C2H3-X. We conducted calculation over 40 compounds that contain different X groups, and the results reveal that the C(sp3)-X and C(sp2)-X bond energies are under the influence of a number of factors. In addition to the covalent properties of C and X atoms and χ[X], the bond energies of C(sp2)-X (i.e., D[C(sp2)-X]) are under the influence of the field/inductive effect (σF[X]) and conjugated effect (σR[X]) of group X, with the former causing a decrease while the latter an increase of D[C(sp2)-X]. Using the acquired quantitative correlation equations and on the basis of a relatively rich set of measured D[Me-X] data, we estimated D[Ph-X] of Ph-X and D[C2H3-X] of C2H3-X, and the estimation accuracy is within experimental uncertainty. Employing the above method, the D[C(sp2)-X] of 33 substituted benzenes, 53 substituted ethenes, and 82 α-substituted naphthalenes was estimated with satisfactory outcomes.

15.
J Org Chem ; 85(13): 8533-8543, 2020 07 02.
Article in English | MEDLINE | ID: mdl-32483961

ABSTRACT

We have developed a protocol to facilitate the nickel-catalyzed decarbonyloxidation of 3-aryl benzofuran-2(3H)-ones to 2-hydroxybenzophenones under mild conditions, which is an efficient approach for the decarbonyloxidation of lactones in organic synthesis. A diverse range of substrates can undergo C(O)-O/C(O)-C bond cleavage to generate the target products in good yields. These 2-hydroxybenzophenones can be converted into a variety of compounds via reactions such as esterification, cyclization, and reduction.

16.
Inorg Chem ; 59(7): 4483-4492, 2020 Apr 06.
Article in English | MEDLINE | ID: mdl-32174112

ABSTRACT

Three classical Fe-MOFs, viz., MIL-100(Fe), MIL-101(Fe), and MIL-53(Fe), were synthesized to serve as platforms for the investigation of structure-activity relationship and catalytic mechanism in the selective conversion of H2S to sulfur. The physicochemical properties of the Fe-MOFs were characterized by various techniques. It was disclosed that the desulfurization performances of Fe-MOFs with well-defined microstructures are obviously different. Among these, MIL-100(Fe) exhibits the highest catalytic performance (ca. 100% H2S conversion and 100% S selectivity at 100-180 °C) that is superior to that of commercial Fe2O3. Furthermore, the results of systematic characterization and DFT calculation reveal that the difference in catalytic performance is mainly because of discrepancy in the amount of Lewis acid sites. A plausible catalytic mechanism has been proposed for H2S selective conversion over Fe-MOFs. This work provides critical insights that are helpful for rational design of desulfurization catalysts.

17.
Nat Commun ; 11(1): 653, 2020 Jan 31.
Article in English | MEDLINE | ID: mdl-32005833

ABSTRACT

The industrial synthesis of ammonia (NH3) using iron-based Haber-Bosch catalyst requires harsh reaction conditions. Developing advanced catalysts that perform well at mild conditions (<400 °C, <2 MPa) for industrial application is a long-term goal. Here we report a Co-N-C catalyst with high NH3 synthesis rate that simultaneously exhibits dynamic and steady-state active sites. Our studies demonstrate that the atomically dispersed cobalt weakly coordinated with pyridine N reacts with surface H2 to produce NH3 via a chemical looping pathway. Pyrrolic N serves as an anchor to stabilize the single cobalt atom in the form of Co1-N3.5 that facilitates N2 adsorption and step-by-step hydrogenation of N2 to *HNNH, *NH-NH3 and *NH2-NH4. Finally, NH3 is facilely generated via the breaking of the *NH2-NH4 bond. With the co-existence of dynamic and steady-state single atom active sites, the Co-N-C catalyst circumvents the bottleneck of N2 dissociation, making the synthesis of NH3 at mild conditions possible.

18.
Org Lett ; 22(3): 827-831, 2020 02 07.
Article in English | MEDLINE | ID: mdl-31913641

ABSTRACT

A concise, one-step route to produce 3,3'-diindolylmethanes (DIMs) from simple indoles and ketones or aldehydes is reported. The key step is the ready formation of indole derivatives that involves the in situ conversion of CF3SO2Na reagent to ·CF3 under oxygen or air (1.0 atm) and UV irradiation. It is disclosed that most of the obtained DIMs show anticancer activities in human bladder cancer cell lines EJ and T24.


Subject(s)
Aldehydes/chemistry , Indoles/chemistry , Ketones/chemistry , Ultraviolet Rays , Alkylation , Indoles/chemical synthesis , Molecular Structure , Stereoisomerism
19.
Sci Bull (Beijing) ; 65(13): 1085-1093, 2020 Jul 15.
Article in English | MEDLINE | ID: mdl-36659160

ABSTRACT

To stabilize Ru nanoparticles against sintering is an urgent problem in the utilization of Ru-based catalysts for NH3 synthesis. In the present study, we used Ru-containing ZSM-5 as seeds to crystallize ZSM-5, and the resulted Ru@ZSM-5 catalyst is highly resistant against Ru sintering. According to the results of diffuse reflectance infrared fourier transform spectroscopy (DRIFTS) and transmission electron microscopy (TEM) analyses, the average size of Ru nanoparticles is around 3.6 nm, which is smaller than that of Ru/ZSM-5-IWI prepared by incipient wetness impregnation. In NH3 synthesis (N2:H2 = 1:3) at 400 °C and 1 MPa, Ru@ZSM-5 displays a formation rate of 5.84 mmolNH3 gcat-1 h-1, which is much higher than that of Ru/ZSM-5-IWI (2.13 mmolNH3 gcat-1 h-1). According to the results of TEM, N2-temperature-programmed desorption (N2-TPD), X-ray photoelectron spectroscopy (XPS) and X-ray absorption fine structure (XAFS) studies, it is deduced that the superior performance of Ru@ZSM-5 is attributable to the small particle size and the ample existence of metallic Ru0 sites. This method of zeolite encapsulation is a feasible way to stabilize Ru nanoparticles for NH3 synthesis.

20.
Chem Commun (Camb) ; 56(7): 1022-1025, 2020 Jan 23.
Article in English | MEDLINE | ID: mdl-31867592

ABSTRACT

A series of unsupported and supported vanadium phosphorus oxide catalysts were prepared by employing a new strategy, which significantly reduced the complexity of catalyst preparation. The greatly simplified catalyst fabrication benefits a greener and lower-cost process for practical applications. The currently fabricated systems showed ca. 90% target product(s) selectivity with a promising yield as well as catalyst durability.

SELECTION OF CITATIONS
SEARCH DETAIL
...