Evaluation of antibacterial textile covered by layer-by-layer coating and loaded with chlorhexidine for wound dressing application.

The aim of this work is to design a wound dressing able to release chlorhexidine (CHX) as antiseptic agent, ensuring long-lasting antibacterial efficacy during the healing. The textile nonwoven (polyethylene terephthalate) (PET) of the dressing was first modified by chitosan (CHT) crosslinked with genipin (Gpn). Parameters such as the concentration of reagents (Gpn and CHT) but also the crosslinking time and the working temperature were optimized to reach the maximal positive charges surface density. This support was then treated by the layer-by-layer (LbL) deposition of a multilayer system composed of methyl-beta-cyclodextrin polymer (PCD) (anionic) and CHT (cationic). After a thermal treatment to stabilize the LbL film, the textiles were loaded with CHX as antiseptic agent. The influence of the thermal treatment i) on the cytocompatibility, ii) on the degradation of the multilayer system, iii) on CHX sorption and release profiles and iv) on the antibacterial activity of the loaded textiles was studied.

Chitosan finishing nonwoven textiles loaded with silver and iodide for antibacterial wound dressing applications.

Polyethylene terephtalate (PET) and Polypropylene (PP) textiles are widely used in biomedical application such as wound dressings and implants. The aim of this work was to develop an antibacterial chitosan (CHT) coating activated by silver or by iodine. Chitosan was immobilized onto PET and PP supports using citric acid (CTR) as a crosslinking agent through a pad-dry-cure textile finishing process. Interestingly, depending on the CHT/CTR molar ratio, two different systems were obtained: rich in cationic ammonium groups when the CTR concentration was 1%w/v, and rich in anionic carboxylate groups when the CTR concentration was 10%w/v. As a consequence, such samples could be selectively loaded with iodine and silver nitrate, respectively.Both types of coatings were analyzed using SEM and FTIR, their sorption capacities were evaluated toward iodide/iodate anions (I(-)/IO3(-)) and the silver cations (Ag(+)) were evaluated using elemental analysis. Finally, in vitro evaluations were carried out to evaluate the cytocompatibility on the epithelial cell line. The silver loaded textile reported a stronger antibacterial effect against E.coli (5 log10 reduction) than toward S. aureus (3 log10) while the antibacterial effect of the iodide loaded textiles was limited to 1 log10 to 2 log10 on both strains.

Build-up of an antimicrobial multilayer coating on a textile support based on a methylene blue-poly(cyclodextrin) complex.

The aim of this work was to develop an antibacterial multilayer coating activated with methylene blue (MB) and based on chitosan (CHT) and cyclodextrin polyelectrolyte (polyCD) onto a non-woven polyethylene terephthalate (PET) textile support. The MB-free and MB-loaded systems were built-up by applying the dip-coating technique, alternating soak cycles of the PET textile preliminarily modified with carboxylate groups in CHT and in polyCD or polyCD/MB complex solutions. The layer-by-layer assembly build-up was followed by optical waveguide lightmode spectroscopy on the one hand and by gravimetry once it was applied on the textile substrate on the other hand. Two chitosan grades were used, low molecular weight (CHT-L) and medium molecular weight (CHT-M). The influence of the molar ratio CD/MB in the polyCD solutions was varied and finally the system underwent a post reticulation with genipin. Such parameters influences were investigated with regard to the loading capacity in MB of the systems, the release kinetics profiles of MB in pure water, phosphate buffer and MEM media, and the degradation of the self-assembled coating in the same media. Finally, biological and microbiological tests were performed to demonstrate the cytocompatibility of the systems and their ability to display a sustained antibacterial effect of the device through the MB prolonged release.

Multilayered textile coating based on a ß-cyclodextrin polyelectrolyte for the controlled release of drugs.

The aim of this work was to develop the formation of multilayered coating incorporating a cyclodextrin polyelectrolyte onto a non-woven polyethylene terephthalate (PET) textile support in order to obtain reservoir and sustained release properties towards bioactive molecules. We optimized the multilayer assembly immobilization onto the PET surface according to the layer-by-layer (LbL) deposition process. After a pre-treatment of the textile support aiming to offer a sufficient ionic character to the surface, it was alternatively immersed into two polyelectrolytes aqueous solutions consisting of chitosan (CHT) as polycation on the one hand, and a ß-cyclodextrin polymer (polyCTR-ßCD) as polyanion on the other hand. In a second approach, a TBBA/polyCTR-ßCD complex (4-tert-butylbenzoic acid, TBBA) was used in order to load the system with a drug model whose kinetics of release was assessed. Gravimetry, microscopy, OWLS, colorimetric titration, infrared and zetametry were used as characterization techniques. An effective deposition on the textile surface due to ionic interactions with alternation of up to 10 layers of each of both polyelectrolytes was clearly evidenced. However, we observed that layer formation occurred to a lesser extent when TBBA/polyCTR-ßCD complex was applied instead of polyCTR-ßCD alone. The release study showed that drug reservoir properties and release kinetics could be controlled by the number of layers in the system and that TBBA release was faster than the multilayered coating degradation.