Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 17 de 17
Filter
1.
Comput Biol Med ; 178: 108778, 2024 Jun 25.
Article in English | MEDLINE | ID: mdl-38925086

ABSTRACT

Body-machine interfaces (BoMIs)-systems that control assistive devices (e.g., a robotic manipulator) with a person's movements-offer a robust and non-invasive alternative to brain-machine interfaces for individuals with neurological injuries. However, commercially-available assistive devices offer more degrees of freedom (DOFs) than can be efficiently controlled with a user's residual motor function. Therefore, BoMIs often rely on nonintuitive mappings between body and device movements. Learning these mappings requires considerable practice time in a lab/clinic, which can be challenging. Virtual environments can potentially address this challenge, but there are limited options for high-DOF assistive devices, and it is unclear if learning with a virtual device is similar to learning with its physical counterpart. We developed a novel virtual robotic platform that replicated a commercially-available 6-DOF robotic manipulator. Participants controlled the physical and virtual robots using four wireless inertial measurement units (IMUs) fixed to the upper torso. Forty-three neurologically unimpaired adults practiced a target-matching task using either the physical (sample size n = 25) or virtual device (sample size n = 18) involving pre-, mid-, and post-tests separated by four training blocks. We found that both groups made similar improvements from pre-test in movement time at mid-test (Δvirtual: 9.9 ± 9.5 s; Δphysical: 11.1 ± 9.9 s) and post-test (Δvirtual: 11.1 ± 9.1 s; Δphysical: 11.8 ± 10.5 s) and in path length at mid-test (Δvirtual: 6.1 ± 6.3 m/m; Δphysical: 3.3 ± 3.5 m/m) and post-test (Δvirtual: 6.6 ± 6.2 m/m; Δphysical: 3.5 ± 4.0 m/m). Our results indicate the feasibility of using virtual environments for learning to control assistive devices. Future work should determine how these findings generalize to clinical populations.

2.
medRxiv ; 2024 Apr 03.
Article in English | MEDLINE | ID: mdl-38633786

ABSTRACT

Background: The ability to relearn a lost skill is critical to motor recovery after a stroke. Previous studies indicate that stroke typically affects the processes underlying motor control and execution but not the learning of those skills. However, these prior studies could have been confounded by the presence of significant motor impairments and/or have not focused on motor acuity tasks (i.e., tasks focusing on the quality of executed actions) that have direct functional relevance to rehabilitation. Methods: Twenty-five participants (10 stroke; 15 controls) were recruited for this prospective, case-control study. Participants learned a novel foot-trajectory tracking task on two consecutive days while walking on a treadmill. On day 1, participants learned a new gait pattern by performing a task that necessitated greater hip and knee flexion during the swing phase of the gait. On day 2, participants repeated the task with their training leg to test retention. An average tracking error was computed to determine online and offline learning and was compared between stroke survivors and uninjured controls. Results: Stroke survivors were able to improve their tracking performance on the first day (p=0.033); however, the amount of learning in stroke survivors was lower in comparison with the control group on both days (p≤0.05). Interestingly, the offline gains in motor learning were higher in stroke survivors when compared with uninjured controls (p=0.011). Conclusions: The results suggest that even high-functioning stroke survivors may have difficulty acquiring new motor skills related to walking, which may be related to the underlying neural damage caused at the time of stroke. Furthermore, it is likely that stroke survivors may require longer training with adequate rest to acquire new motor skills, and rehabilitation programs should target motor skill learning to improve outcomes after stroke.

3.
J Neuroeng Rehabil ; 21(1): 62, 2024 Apr 24.
Article in English | MEDLINE | ID: mdl-38658969

ABSTRACT

BACKGROUND: Stroke remains a major cause of long-term adult disability in the United States, necessitating the need for effective rehabilitation strategies for post-stroke gait impairments. Despite advancements in post-stroke care, existing rehabilitation often falls short, prompting the development of devices like robots and exoskeletons. However, these technologies often lack crucial input from end-users, such as clinicians, patients, and caregivers, hindering their clinical utility. Employing a human-centered design approach can enhance the design process and address user-specific needs. OBJECTIVE: To establish a proof-of-concept of the human-centered design approach by refining the NewGait® exosuit device for post-stroke gait rehabilitation. METHODS: Using iterative design sprints, the research focused on understanding the perspectives of clinicians, stroke survivors, and caregivers. Two design sprints were conducted, including empathy interviews at the beginning of the design sprint to integrate end-users' insights. After each design sprint, the NewGait device underwent refinements based on emerging issues and recommendations. The final prototype underwent mechanical testing for durability, biomechanical simulation testing for clinical feasibility, and a system usability evaluation, where the new stroke-specific NewGait device was compared with the original NewGait device and a commercial product, Theratogs®. RESULTS: Affinity mapping from the design sprints identified crucial categories for stakeholder adoption, including fit for females, ease of donning and doffing, and usability during barefoot walking. To address these issues, a system redesign was implemented within weeks, incorporating features like a loop-backed neoprene, a novel closure mechanism for the shoulder harness, and a hook-and-loop design for the waist belt. Additional improvements included reconstructing anchors with rigid hook materials and replacing latex elastic bands with non-latex silicone-based bands for enhanced durability. Further, changes to the dorsiflexion anchor were made to allow for barefoot walking. Mechanical testing revealed a remarkable 10-fold increase in durability, enduring 500,000 cycles without notable degradation. Biomechanical simulation established the modularity of the NewGait device and indicated that it could be configured to assist or resist different muscles during walking. Usability testing indicated superior performance of the stroke-specific NewGait device, scoring 84.3 on the system usability scale compared to 62.7 for the original NewGait device and 46.9 for Theratogs. CONCLUSION: This study successfully establishes the proof-of-concept for a human-centered design approach using design sprints to rapidly develop a stroke-specific gait rehabilitation system. Future research should focus on evaluating the clinical efficacy and effectiveness of the NewGait device for post-stroke rehabilitation.


Subject(s)
Equipment Design , Exoskeleton Device , Gait Disorders, Neurologic , Stroke Rehabilitation , Humans , Stroke Rehabilitation/instrumentation , Stroke Rehabilitation/methods , Gait Disorders, Neurologic/rehabilitation , Gait Disorders, Neurologic/etiology , User-Centered Design , Female , Biomechanical Phenomena , Male , Middle Aged , Robotics/instrumentation , Caregivers
4.
Article in English | MEDLINE | ID: mdl-38607772

ABSTRACT

Background: Previous research has shown that noninvasive brain stimulation can be used to study how the central nervous system (CNS) prepares the execution of a motor task. However, these previous studies have been limited to a single muscle or single degree of freedom movements (e.g., wrist flexion). It is currently unclear if the findings of these studies generalize to multi-joint movements involving multiple muscles, which may be influenced by kinematic redundancy and muscle synergies. Objective: The objective of this study was to characterize corticospinal excitability during motor preparation in the cortex prior to functional upper extremity reaches. Methods: 20 participants without neurological impairments volunteered for this study. During the experiment, the participants reached for a cup in response to a visual "Go Cue". Prior to movement onset, we used transcranial magnetic stimulation (TMS) to stimulate the motor cortex and measured the changes in motor evoked potentials (MEPs) in several upper extremity muscles. We varied each participant's initial arm posture and used a novel synergy-based MEP analysis to examine the effect of muscle coordination on MEPs. Additionally, we varied the timing of the stimulation between the Go Cue and movement onset to examine the time course of motor preparation. Results: We found that synergies with strong proximal muscle (shoulder and elbow) components emerged as the stimulation was delivered closer to movement onset, regardless of arm posture, but MEPs in the distal (wrist and finger) muscles were not facilitated. We also found that synergies varied with arm posture in a manner that reflected the muscle coordination of the reach. Conclusions: We believe that these findings provide useful insight into the way the CNS plans motor skills.

5.
Gait Posture ; 108: 56-62, 2024 Feb.
Article in English | MEDLINE | ID: mdl-37988887

ABSTRACT

BACKGROUND: Ankle joint stiffness and viscosity are fundamental mechanical descriptions that govern the movement of the body and impact an individual's walking ability. Hence, these internal properties of a joint have been increasingly used to evaluate the effects of pathology (e.g., stroke) and in the design and control of robotic and prosthetic devices. However, the reliability of these measurements is currently unclear, which is important for translation to clinical use. RESEARCH QUESTION: Can we reliably measure the mechanical impedance parameters of the ankle while standing and walking? METHODS: Eighteen able-bodied individuals volunteered to be tested on two different days separated by at least 24 h. Participants received several small random ankle dorsiflexion perturbations while standing and during the stance phase of walking using a custom-designed robotic platform. Three-dimensional motion capture cameras and a 6-component force plate were used to quantify ankle joint motions and torque responses during normal and perturbed conditions. Ankle mechanical impedance was quantified by computing participant-specific ensemble averages of changes in ankle angle and torque due to perturbation and fitting a second-order parametric model consisting of stiffness, viscosity, and inertia. The test-retest reliability of each parameter was assessed using intraclass correlation coefficients (ICCs). We also computed the minimal detectable change (MDC) for each impedance parameter to establish the smallest amount of change that falls outside the measurement error of the instrument. RESULTS: In standing, the reliability of stiffness, viscosity, and inertia was good to excellent (ICCs=0.67-0.91). During walking, the reliability of stiffness and viscosity was good to excellent (ICCs=0.74-0.84) while that of inertia was fair to good (ICCs=0.47-0.68). The MDC for a single subject ranged from 20%- 65% of the measurement mean but was higher (>100%) for inertia during walking. SIGNIFICANCE: Results indicate that dynamic measures of ankle joint impedance were generally reliable and could serve as an adjunct clinical tool for evaluating gait impairments.


Subject(s)
Ankle Joint , Walking , Humans , Ankle Joint/physiology , Reproducibility of Results , Walking/physiology , Ankle , Standing Position , Biomechanical Phenomena
6.
IEEE Trans Haptics ; PP2023 Nov 08.
Article in English | MEDLINE | ID: mdl-37938965

ABSTRACT

Semi-passive rehabilitation robots resist and steer a patient's motion using only controllable passive force elements (e.g., controllable brakes). Contrarily, passive robots use uncontrollable passive force elements (e.g., springs), while active robots use controllable active force elements (e.g., motors). Semi-passive robots can address cost and safety limitations of active robots, but it is unclear if they have utility in rehabilitation. Here, we assessed if a semi-passive robot could provide haptic guidance to facilitate motor learning. We first performed a theoretical analysis of the robot's ability to provide haptic guidance, and then used a prototype to perform a motor learning experiment that tested if the guidance helped participants learn to trace a shape. Unlike prior studies, we minimized the confounding effects of visual feedback during motor learning. Our theoretical analysis showed that our robot produced guidance forces that were, on average, 54° from the current velocity (active devices achieve 90). Our motor learning experiment showed, for the first time, that participants who received haptic guidance during training learned to trace the shape more accurately (97.57% error to 52.69%) than those who did not receive guidance (81.83% to 78.18%). These results support the utility of semi-passive robots in rehabilitation.

7.
bioRxiv ; 2023 May 16.
Article in English | MEDLINE | ID: mdl-37292868

ABSTRACT

The central nervous system (CNS) moves the human body by forming a plan in the primary motor cortex and then executing this plan by activating the relevant muscles. It is possible to study motor planning by using noninvasive brain stimulation techniques to stimulate the motor cortex prior to a movement and examine the evoked responses. Studying the motor planning process can reveal useful information about the CNS, but previous studies have generally been limited to single degree of freedom movements ( e.g., wrist flexion). It is currently unclear if findings in these studies generalize to multi-joint movements, which may be influenced by kinematic redundancy and muscle synergies. Here, our objective was to characterize motor planning in the cortex prior to a functional reach involving the upper extremity. We asked participants to reach for a cup placed in front of them when presented with a visual "Go Cue". Following the go cue, but prior to movement onset, we used transcranial magnetic stimulation (TMS) to stimulate the motor cortex and measured the changes in the magnitudes of evoked responses in several upper extremity muscles (MEPs). We varied each participant's initial arm posture to examine the effect of muscle coordination on MEPs. Additionally, we varied the timing of the stimulation between the go cue and movement onset to examine the time course of changes in the MEPs. We found that the MEPs in all proximal (shoulder and elbow) muscles increased as the stimulation was delivered closer to movement onset, regardless of arm posture, but MEPs in the distal (wrist and finger) muscles were not facilitated or even inhibited. We also found that facilitation varied with arm posture in a manner that reflected the coordination of the subsequent reach. We believe that these findings provide useful insight into the way the CNS plans motor skills.

8.
Comput Biol Med ; 154: 106627, 2023 03.
Article in English | MEDLINE | ID: mdl-36753980

ABSTRACT

BACKGROUND: Motor learning experiments are typically performed in laboratory environments, which can be time-consuming and require dedicated equipment/personnel, thus limiting the ability to gather data from large samples. To address this problem, some researchers have transitioned to unsupervised online experiments, showing advantages in participant recruitment without losing validity. However, most online platforms require coding experience or time-consuming setups to create and run experiments, limiting their usage across the field. METHOD: To tackle this issue, an open-source web-based platform was developed (https://experiments.neurro-lab.engin.umich.edu/) to create, run, and manage procedural skill learning experiments without coding or setup requirements. The feasibility of the platform and the comparability of the results between supervised (n = 17) and unsupervised (n = 24) were tested in 41 naive right-handed participants using an established sequential finger tapping task. The study also tested if a previously reported rapid form of offline consolidation (i.e., microscale learning) in procedural skill learning could be replicated with the developed platform and evaluated the extent of interlimb transfer associated with the finger tapping task. RESULTS: The results indicated that the performance metrics were comparable between the supervised and unsupervised groups (all p's > 0.05). The learning curves, mean tapping speeds, and micro-scale learning were similar to previous studies. Training led to significant improvements in mean tapping speed (2.22 ± 1.48 keypresses/s, p < 0.001) and a significant interlimb transfer of learning (1.22 ± 1.43 keypresses/s, p < 0.05). CONCLUSIONS: The results show that the presented platform may serve as a valuable tool for conducting online procedural skill-learning experiments.


Subject(s)
Motor Skills , Psychomotor Performance , Humans , Learning , Hand
9.
IEEE Trans Biomed Eng ; 70(4): 1274-1285, 2023 04.
Article in English | MEDLINE | ID: mdl-36240034

ABSTRACT

OBJECTIVE: Functional resistance training (FRT) during walking is an emerging approach for rehabilitating individuals with neuromuscular or orthopedic injuries. During FRT, wearable exoskeleton/braces can target resistance to a weakened leg joint; however, the resistive properties of the training depend on the type of resistive elements used in the device. Hence, this study was designed to examine how the biomechanical and neural effects of functional resistance training differ with viscous and elastic resistances during both treadmill and overground walking. METHODS: Fourteen able-bodied individuals were trained on two separate sessions with two devices that provided resistance to the knee (viscous and elastic) while walking on a treadmill. We measured gait biomechanics and muscle activation during training, as well as kinematic aftereffects and changes in peripheral fatigue and neural excitability after training. RESULTS: We found the resistance type differentially altered gait kinetics during training-elastic resistance increased knee extension during stance while viscous resistance primarily affected swing. Also, viscous resistance increased power generation while elastic resistance could increase power absorption. Both devices resulted in significant kinematic and neural aftereffects. However, overground kinematic aftereffects and neural excitability did not differ between devices. CONCLUSION: Different resistance types can be used to alter gait biomechanics during training. While there were no resistance-specific changes in acute neural adaptation following training, it is still possible that prolonged and repeated training could produce differential effects. SIGNIFICANCE: Resistance type alters the kinetics of functional resistance training. Prolonged and repeated training sessions on patients will be needed to further measure the effects of these devices.


Subject(s)
Resistance Training , Humans , Walking/physiology , Knee Joint/physiology , Gait/physiology , Muscle, Skeletal/physiology
10.
Virtual Real ; 26(2): 525-538, 2022 Jun.
Article in English | MEDLINE | ID: mdl-35600315

ABSTRACT

Mirror therapy is increasingly used in stroke rehabilitation to improve functional movements of the affected limb. However, the extent of mirroring in conventional mirror therapy is typically fixed (1:1) and cannot be tailored based on the patient's impairment level. Further, the movements of the affected limb are not actively incorporated in the therapeutic process. To address these issues, we developed an immersive VR system using HTC Vive and Leap Motion, which communicates with our free and open-source software environment programmed using SteamVR and the Unity 3D gaming engine. The mirror therapy VR environment was incorporated with two novel features: (1) scalable mirroring and (2) shared control. In the scalable mirroring, mirror movements were programmed to be scalable between 0 and 1, where 0 represents no movements, 0.5 represents 50% mirroring, and 1 represents 100% mirroring. In shared control, the contribution of the mirroring limb to the movements was programmed to be scalable between 0 to 1, where 0 represents 100% contribution from the mirroring limb (i.e., no mirroring), 0.5 represents 50% of movements from the mirrored limb and 50% of movements from the mirroring limb, and 1 represents full mirroring (i.e., no shared movements). Validation experiments showed that these features worked appropriately. The proposed VR-based mirror therapy is the first fully developed system that is freely available to the rehabilitation science community. The scalable and shared control features can diversify mirror therapy and potentially augment the outcomes of rehabilitation, although this needs to be verified through future experiments.

11.
J Biomech ; 131: 110936, 2022 01.
Article in English | MEDLINE | ID: mdl-34979357

ABSTRACT

Loss of independent joint control due to abnormal coupling of shoulder and elbow torques (i.e., abnormal synergies) is a common impairment after stroke and has been linked to poor upper-extremity function in stroke survivors. Previous research has shown that the flexor synergy (i.e., shoulder abduction coupled with elbow flexion) can be treated by progressively increasing shoulder abduction loading during elbow extension exercises. However, this finding has not been implemented in planar reaching exercises, as this requires a clear understanding of the relationship between external forces on the hand and elicited joint torques when reaching for different targets on a table. The objective of this study was to model this relationship and determine reach/force combinations that could be used to counteract either the flexor or extensor synergies. We used a musculoskeletal model to compute shoulder and elbow joint torques when reaching for targets on a table against different force directions and magnitudes. We found that force direction modulated the coupling of shoulder and elbow torques and force magnitude scaled each torque uniformly such that the extent of coupling remained the same. Additionally, we found that forces on the hand could be used to gradually increase the magnitude of simultaneous shoulder and elbow torques that counteract either the flexor or extensor synergy. These results provide the foundation to develop therapeutic interventions that address abnormal joint couplings following stroke using forces on the hand during planar reaching. Future studies should examine the therapeutic benefits of these findings in patient populations such as stroke.


Subject(s)
Elbow Joint , Hand , Humans , Movement , Range of Motion, Articular , Shoulder , Torque , Upper Extremity
12.
J Am Coll Cardiol ; 77(17): 2204-2215, 2021 05 04.
Article in English | MEDLINE | ID: mdl-33926657

ABSTRACT

BACKGROUND: The randomized SOLVE-TAVI (compariSon of secOnd-generation seLf-expandable vs. balloon-expandable Valves and gEneral vs. local anesthesia in Transcatheter Aortic Valve Implantation) trial compared newer-generation self-expanding valves (SEV) and balloon-expandable valves (BEV) as well as local anesthesia with conscious sedation (CS) and general anesthesia (GA) in patients undergoing transfemoral transcatheter aortic valve replacement (TAVR). Both strategies showed similar outcomes at 30 days. OBJECTIVES: The purpose of this study was to compare clinical outcomes during 1-year follow-up in the randomized SOLVE-TAVI trial. METHODS: Using a 2 × 2 factorial design 447 intermediate- to high-risk patients with severe, symptomatic aortic stenosis were randomly assigned to transfemoral TAVR using either the SEV (Evolut R, Medtronic Inc., Minneapolis, Minnesota) or the BEV (Sapien 3, Edwards Lifesciences, Irvine, California) as well as CS or GA at 7 sites. RESULTS: In the valve-comparison strategy, rates of the combined endpoint of all-cause mortality, stroke, moderate or severe paravalvular leakage, and permanent pacemaker implantation were similar between the BEV and SEV group (n = 84, 38.3% vs. n = 87, 40.4%; hazard ratio: 0.94; 95% confidence interval: 0.70 to 1.26; p = 0.66) at 1 year. Regarding the anesthesia comparison, the combined endpoint of all-cause mortality, stroke, myocardial infarction, and acute kidney injury occurred with similar rates in the GA and CS groups (n = 61, 25.7% vs. n = 54, 23.8%; hazard ratio: 1.09; 95% confidence interval: 0.76 to 1.57; p = 0.63). CONCLUSIONS: In intermediate- to high-risk patients undergoing transfemoral TAVR, newer-generation SEV and BEV as well as CS and GA showed similar clinical outcomes at 1 year using a combined clinical endpoint. (SecOnd-generation seLf-expandable Versus Balloon-expandable Valves and gEneral Versus Local Anesthesia in TAVI [SOLVE-TAVI]; NCT02737150).


Subject(s)
Anesthesia/methods , Aortic Valve Stenosis/surgery , Postoperative Complications/epidemiology , Transcatheter Aortic Valve Replacement/adverse effects , Aged, 80 and over , Female , Follow-Up Studies , Germany/epidemiology , Humans , Incidence , Male , Treatment Outcome
13.
IEEE Trans Biomed Eng ; 68(6): 1941-1950, 2021 06.
Article in English | MEDLINE | ID: mdl-33201805

ABSTRACT

OBJECTIVE: This article aimed to develop a unique exoskeleton to provide different types of elastic resistances (i.e., resisting flexion, extension, or bidirectionally) to the leg muscles during walking. METHODS: We created a completely passive leg exoskeleton, consisting of counteracting springs, pulleys, and clutches, to provide different types of elastic resistance to the knee. We first used a benchtop setting to calibrate the springs and validate the resistive capabilities of the device. We then tested the device's ability to alter gait mechanics, muscle activation, and kinematic aftereffects when walking on a treadmill under the three resistance types. RESULTS: Benchtop testing indicated that the device provided a nearly linear torque profile and could be accurately configured to alter the angle where the spring system was undeformed (i.e., the resting position). Treadmill testing indicated the device could specifically target knee flexors, extensors, or both, and increase eccentric loading at the joint. Additionally, these resistance types elicited different kinematic aftereffects that could be used to target user-specific spatiotemporal gait deficits. CONCLUSION: These results indicate that the elastic device can provide various types of targeted resistance training during walking. SIGNIFICANCE: The proposed elastic device can provide a diverse set of resistance types that could potentially address user-specific muscle weaknesses and gait deficits through functional resistance training.


Subject(s)
Exoskeleton Device , Biomechanical Phenomena , Gait , Humans , Knee Joint , Leg , Walking
14.
Circulation ; 142(15): 1437-1447, 2020 10 13.
Article in English | MEDLINE | ID: mdl-32819145

ABSTRACT

BACKGROUND: In clinical practice, local anesthesia with conscious sedation (CS) is performed in roughly 50% of patients undergoing transcatheter aortic valve replacement. However, no randomized data assessing the safety and efficacy of CS versus general anesthesia (GA) are available. METHODS: The SOLVE-TAVI (Comparison of Second-Generation Self-Expandable Versus Balloon-Expandable Valves and General Versus Local Anesthesia in Transcatheter Aortic Valve Implantation) trial is a multicenter, open-label, 2×2 factorial, randomized trial of 447 patients with aortic stenosis undergoing transfemoral transcatheter aortic valve replacement comparing CS versus GA. The primary efficacy end point was powered for equivalence (equivalence margin 10% with significance level 0.05) and consisted of the composite of all-cause mortality, stroke, myocardial infarction, infection requiring antibiotic treatment, and acute kidney injury at 30 days. RESULTS: The primary composite end point occurred in 27.2% of CS and 26.4% of GA patients (rate difference, 0.8 [90% CI, -6.2 to 7.8]; Pequivalence=0.015). Event rates for the individual components were as follows: all-cause mortality, 3.2% versus 2.3% (rate difference, 1.0 [90% CI, -2.9 to 4.8]; Pequivalence<0.001); stroke, 2.4% versus 2.8% (rate difference, -0.4 [90% CI, -3.8 to 3.8]; Pequivalence<0.001); myocardial infarction, 0.5% versus 0.0% (rate difference, 0.5 [90% CI, -3.0 to 3.9]; Pequivalence<0.001), infection requiring antibiotics 21.1% versus 22.0% (rate difference, -0.9 [90% CI, -7.5 to 5.7]; Pequivalence=0.011); acute kidney injury, 9.0% versus 9.2% (rate difference, -0.2 [90% CI, -5.2 to 4.8]; Pequivalence=0.0005). There was a lower need for inotropes or vasopressors with CS (62.8%) versus GA (97.3%; rate difference, -34.4 [90% CI, -41.0 to -27.8]). CONCLUSIONS: Among patients with aortic stenosis undergoing transfemoral transcatheter aortic valve replacement, use of CS compared with GA resulted in similar outcomes for the primary efficacy end point. These findings suggest that CS can be safely applied for transcatheter aortic valve replacement. Registration: URL: https://www.clinicaltrials.gov; Unique identifier: NCT02737150.


Subject(s)
Anesthesia, General , Anesthesia, Local , Aortic Valve Stenosis/surgery , Conscious Sedation , Transcatheter Aortic Valve Replacement , Aged , Aged, 80 and over , Female , Follow-Up Studies , Humans , Male
15.
IEEE Trans Neural Syst Rehabil Eng ; 28(9): 2025-2034, 2020 09.
Article in English | MEDLINE | ID: mdl-32746319

ABSTRACT

Muscle synergy analysis is commonly used to study how the nervous system coordinates the activation of a large number of muscles during human reaching. In synergy analysis, muscle activation data collected from various reaching directions are subjected to dimensionality reduction techniques to extract muscle synergies. Typically, muscle activation data are obtained only from a limited set of reaches with an inherent assumption that the performed reaches adequately represent all possible reaches. In this study, we investigated how the number of reaching directions included in the synergy analysis influences the validity of the extracted synergies. We used a musculoskeletal model to compute muscle activations required to perform 36 evenly spaced planar reaches. Nonnegative matrix factorization (NMF) and principal component analysis (PCA) were then used to extract reference synergies. We then selected several subsets of reaches and compared the ability of the extracted synergies from each subset to represent the muscle activation from all 36 reaches. We found that 6 reaches were required to extract valid synergies, and a further reduction in the number of reaches changed the composition of the resulting synergies. Further, we found that the choice of reaching directions included in the analysis for a given number of reaches also affected the validity of the extracted synergies. These findings indicate that both the number and the choice of reaching directions included in the analysis impacted the validity of the extracted synergies.


Subject(s)
Algorithms , Muscle, Skeletal , Biomechanical Phenomena , Electromyography , Humans , Principal Component Analysis
16.
Gait Posture ; 75: 129-136, 2020 01.
Article in English | MEDLINE | ID: mdl-31678694

ABSTRACT

BACKGROUND: Task-specific loading of the limbs-termed as functional resistance training-is commonly used in gait rehabilitation; however, the biomechanical and neuromuscular effects of various forms of functional resistance training have not been studied systematically. This information is crucial for correctly selecting the appropriate mode of functional resistance training when treating individuals with gait disorders. RESEARCH QUESTION: To comprehensively evaluate the biomechanical (i.e., joint moment and power) and muscle activation changes with different forms of functional resistance training that are commonly used in clinics and research using biomechanical simulation-based analyses. METHODS: We developed simulations of functional resistance training during walking using OpenSim (Gait2354, 23 degrees of freedom and 54 muscles) and custom MATLAB scripts. We investigated five modes of functional resistance training that have been commonly used in clinics or in research: (1) a weight attached at the ankle, (2) an elastic band attached at the ankle, (3) a viscous device attached to the hip and knee, (4) a weight attached at the pelvis, and (5) a constant backwards pulling force at the pelvis. Lower-extremity joint moments and powers were computed using inverse dynamics and muscle activations were estimated using computed muscle control while walking with each device under multiple resistance levels: normal walking with no resistance, and walking with 30, 60, and 90 Newtons of resistance. RESULTS: The results indicate that the way in which resistance is applied during gait training differentially affects the internal joint moments, powers, and muscle activations as well as the joints and phase of the gait cycle where the resistance was experienced. SIGNIFICANCE: The results highlight the importance of understanding the joints and muscles that are targeted by various modes of functional resistance training and carefully choosing the best mode of training that meets the specific therapeutic needs of the patient.


Subject(s)
Muscle Contraction/physiology , Muscle, Skeletal/physiology , Resistance Training/methods , Walking/physiology , Biomechanical Phenomena , Computer Simulation , Gait/physiology , Humans , Models, Anatomic , Weight-Bearing/physiology
17.
J Biomech ; 88: 33-37, 2019 May 09.
Article in English | MEDLINE | ID: mdl-30905405

ABSTRACT

The use of motor learning strategies may enhance rehabilitation outcomes of individuals with neurological injuries (e.g., stroke or cerebral palsy). A common strategy to facilitate learning of challenging tasks is to use sequential progression - i.e., initially reduce task difficulty and slowly increase task difficulty until the desired difficulty level is reached. However, the evidence related to the use of such sequential progressions to improve learning is mixed for functional skill learning tasks, especially considering situations where practice duration is limited. Here, we studied the benefits of sequential progression using a functional motor learning task that has been previously used in gait rehabilitation. Three groups of participants (N = 43) learned a novel motor task during treadmill walking using different learning strategies. Participants in the specific group (n = 21) practiced only the criterion task (i.e., matching a target template that was scaled-up by 30%) throughout the training. Participants in the sequential group (n = 11) gradually progressed to the criterion task (from 3% to 30% in increments of 3%), whereas participants in the random group (n = 11) started at 3% and progressed in random increments (involving both increases and decreases in task difficulty) to the criterion task. At the end of training, kinematic tracking performance on the criterion task was evaluated in all participants both with and without visual feedback. Results indicated that the tracking error was significantly lower in the specific group, and no differences were observed between the sequential and the random progression groups. The findings indicate that the amount of practice in the criterion task is more critical than the difficulty and variations of task practice when learning new gait patterns during treadmill walking.


Subject(s)
Gait/physiology , Learning , Rehabilitation/methods , Adult , Biomechanical Phenomena , Feedback, Sensory , Female , Humans , Male , Middle Aged
SELECTION OF CITATIONS
SEARCH DETAIL
...