Effect of nitrogen compounds on transport of ruthenium through the RCS.

Ruthenium is a fission product that can be released from the fuel in case of a severe nuclear accident. In this work the impact of the atmosphere composition, including air radiolysis products, on the transport of ruthenium through a primary circuit was examined. Experiments were performed at temperatures 1300, 1500 and 1700 K in a slightly humid air. In the experiments significant effect of nitrogen oxides (N2O, NO2) and nitric acid on the ruthenium chemistry in the model primary circuit was observed. The obtained results indicate a strong effect of air radiolysis products on the quantity partitioning of transported ruthenium to gaseous and aerosol compounds.

Workplace health promotion and stakeholder positions: a Finnish case study.

Modern workplace health promotion (WHP) requires collaboration, partnerships, and alliances with both internal and external stakeholders. However, the identification of the key stakeholders as well as the systematic mapping of their views has barely been covered in the existing research literature. This article describes the stakeholders and stakeholder positions in WHP in Finland. In this study, the stakeholders were classified as internal, interface, and external stakeholders. Furthermore, based on the authors' research, stakeholders and their positions were represented on a stakeholder map as well as by the power-interest matrix of the stakeholders. The governmental authorities play a key role in driving the strategic change toward WHP by preparing the required legislation and regulatory measures. However, both active employers and active employees can through their own work accelerate the development of new WHP services. Close collaboration between employers and employees is required at the individual workplaces. Some stakeholders, such as pension funds and occupational health services (OHS) providers, can act as important driving forces and support the strategic implementation of WHP in the workplaces. However, alone they have only limited opportunities to organize the WHP activities. Understanding the various stakeholders and the systematic mapping of their positions is essential for the successful planning and implementation of WHP activities.

Production and characterization of plutonium dioxide particles as a quality control material for safeguards purposes.

Plutonium (Pu) dioxide particles were produced from certified reference material (CRM) 136 solution (CRM 136-plutonium isotopic standard, New Brunswick Laboratory, Argonne, IL, U.S.A., 1987) using an atomizer system on December 3, 2009 after chemical separation of americium (Am) on October 27, 2009. The highest density of the size distribution of the particles obtained from 312 particles on a selected impactor stage was in the range of 0.7-0.8 µm. The flattening degree of 312 particles was also estimated. The isotopic composition of Pu and uranium (U) and the amount of Am were estimated by thermal ionization mass spectrometry (TIMS), inductively coupled plasma mass spectrometry (ICPMS), and α-spectrometry. Within uncertainties the isotopic composition of the produced particles is in agreement with the expected values, which were derived from the decay correction of the Pu isotopes in the CRM 136. The elemental ratio of Am to Pu in the produced particles was determined on the 317th and 674th day after Am separation, and the residual amount of Am in the solution was estimated. The analytical results of single particles by micro-Raman-scanning electron microscopy (SEM)-energy-dispersive X-ray spectrometry (EDX) indicate that the produced particles are Pu dioxide. Our initial attempts to measure the density of two single particles gave results with a spread value accompanied by a large uncertainty.

Exposure to CeO(2) nanoparticles during flame spray process.

The use of nanotechnology in different fields is increasing rapidly. Engineered nanoparticles (ENPs) may have adverse effect on human health, but little is known about the exposure levels of ENPs at occupational settings. In this study, exposure levels of cerium oxide (CeO(2)) ENPs were measured during enclosed flame spray process used for coating and surface modification of materials. Particle number concentration, mass concentration, and morphology and composition of the ENPs were studied. The average particle number concentration varied from 4.7·10(3) to 2.1·10(5) 1/cm(3) inside the enclosure, and from 4.6·10(3) to 1.4·10(4) 1/cm(3) outside the enclosure. The average mass concentrations inside and outside the enclosure were 320 and 66 µg/m(3), respectively. A batch-type process caused significant variation in the concentrations, especially inside the enclosure. CeO(2) ENPs were mainly chainlike aggregates, consisting of spherical 20-40 nm primary particles having crystalline structure. In conclusion, enclosure of the process with efficient ventilation seemed to be an effective means to reduce the exposure to CeO(2) ENPs as expected.

Reduction of fine particle emissions from wood combustion with optimized condensing heat exchangers.

In this study, we designed and built a condensing heat exchanger capable of simultaneous fine particle emission reduction and waste heat recovery. The deposition mechanisms inside the heat exchanger prototype were maximized using a computer model which was later compared to actual measurements. The main deposition mechanisms were diffusio- and thermophoresis which have previously been examined in similar conditions only separately. The obtained removal efficiency in the experiments was measured in the total number concentration and ranged between 26 and 40% for the given pellet stove and the heat exchanger. Size distributions and number concentrations were measured with a TSI Fast mobility particle sizer (FMPS). The computer model predicts that there exists a specific upper limit for thermo- and diffusiophoretic deposition for each temperature and water vapor concentration in the flue gas.

Personal health systems and value creation mechanisms in occupational health care.

Personal Health Systems are believed to have great business potential among citizens, but they might reach also an important market in occupational health care. However, in reaching the occupational health care market, it is important to understand the value creation and value configuration mechanisms of this particular market. This paper also claims that in such a business-to-business market service integrators are needed to compose for the various customers specific offerings combing a tailored variety of products and services to suit their specific needs.